Dealers - Tuning all Hondata systems

Download the Dealer Application and Hondata policy in Word format  (by sending us this application you agree to not advertise below the minimum advertised price)

If you want to tune Hondata systems - stage 2 or higher, for other people here is what you will need a minimum of :

• Your own Windows laptop.
• $950 - Dealer s200 (S200 with boost, datalogging, 3-Step and RomEditor) with Moates Burn1 and Ostrich real time emulator). Price not including freight $950. (This price is less if you already have some of the components).
• Must own a dyno (we recommend the Dynapack) with a wide band lambda meter.

Once you have the s200, ROM Editor, HondaLogger and EPROM programmer you are ready to sell and tune Hondata s200 systems, at much lower prices than any standalone systems. 85 % of Hondata sales are in the $300-$800 range, which are prices no standalones are capable of reaching.  We require all dealers to have the s200 dealer kit as there are many thousands of potential customers that need tuning and we want all our dealers to be able to provide this service.

All Hondata systems ship with the stock Honda fuel and ignition maps for the Civic and Integra and Prelude - the results of large amounts of tuning by the world's best engine manufacturer. This means the cars start, idle and have good emissions. In addition there is a large and increasing library of maps for most NA, turbo and supercharged VTEC and Non VTEC Hondas for you to use as starting points.

After a minimum number of sales you are listed as a dealer on the website.  (sell 5 systems and provide us with before and after dyno results as well as the BIN file used)

You will receive 20% off the first 4 systems after purchasing the dealer kit at full price, and 25% after that. Our retail price list can be viewed at Prices. 

You cannot modify stock chips or chips from other manufacturers with the Hondata software.

Additional notes for dealers

Additional notes for dealers

Dealers must support and tune Hondata systems which they sell. Referring customers to other dyno tuning shops is not acceptable. Re-selling Hondata systems without adding any value (e.g. internet sales) is not acceptable, as per the MAP agreement.

Dealers - Installing Hondata systems

You will need either:

• To send the ECU to Hondata for modification ($75-$100 plus shipping)
• To use a local qualified electronics technician
• To socket the ECU yourself

If you wish to install systems yourself you will need about $450 for the following:

• Soldering iron (we recommend the Hakko 936 temperature controlled static safe soldering iron).
• De-soldering station (we recommend the Hakko 808 de-soldering station).