Search found 51 matches
- Thu Sep 06, 2007 10:14 am
- Forum: s300 / SManager
- Topic: injector question
- Replies: 5
- Views: 3135
- Sat Aug 25, 2007 4:50 pm
- Forum: s300 / SManager
- Topic: Is it real knock or something else?
- Replies: 6
- Views: 3741
The knock sensor itself is actually the same as the GSR (same part number), but the sensitivity might be different on the knock board inside the ECU. Since we can't adjust the knock board, there's probably not much we can do but to disable it. I've been searching for another option to detect knocks ...
- Sat Aug 25, 2007 9:40 am
- Forum: s300 / SManager
- Topic: Is it real knock or something else?
- Replies: 6
- Views: 3741
Yes, I have tried reducing the timing by 2 degrees from column 6 to 10 ( both low and high cam tables) with the same result (still detecting knocks). I then reduced the timing by 5 degrees, and later by 10 degrees with the same result. Not only that, it also registers knocks when I slightly blip the...
- Thu Aug 23, 2007 11:38 pm
- Forum: s300 / SManager
- Topic: No S.Trim or L.Trim reading in SManager
- Replies: 4
- Views: 3096
Just a follow up that after switching back to the narrowband O2 sensor, the s.trim and l.trim reading are working correctly. I keep forgetting that after finished tuning, I usually switch back to the narrowband but kept the wideband connected to a secondary O2 bung to run the external AF display. Th...
- Thu Aug 23, 2007 8:24 pm
- Forum: s300 / SManager
- Topic: Is it real knock or something else?
- Replies: 6
- Views: 3741
- Thu Aug 23, 2007 1:15 pm
- Forum: s300 / SManager
- Topic: Is it real knock or something else?
- Replies: 6
- Views: 3741
Is it real knock or something else?
I have finished street tuning a 93 Prelude with a stock JDM H22a and USDM P72 ECU. The engine is running very smooth and strong. The fuel and ignition tables don't seem very aggressive. However, when trying to collect a few datalogs with the knock sensor on, I noticed the ignition timing was retarde...
- Tue Aug 21, 2007 11:03 am
- Forum: s300 / SManager
- Topic: No S.Trim or L.Trim reading in SManager
- Replies: 4
- Views: 3096
- Mon Aug 20, 2007 8:27 pm
- Forum: s300 / SManager
- Topic: No S.Trim or L.Trim reading in SManager
- Replies: 4
- Views: 3096
No S.Trim or L.Trim reading in SManager
I have just installed the s300 in a P72 ECU and everything seems to be working flawlessly, except there is no reading from the S.Trim or L.Trim under the Sensors property screen. I have connected a FJO wideband to the a-pipe and the analog output to the O2 sensor input. There is also an external A/F...
- Tue Apr 08, 2003 8:36 am
- Forum: HondaLogger Software
- Topic: this post is long overdue!!
- Replies: 18
- Views: 16711
- Mon Apr 07, 2003 3:38 pm
- Forum: s100/s200
- Topic: Can ROM Editor read non-hondata chips?
- Replies: 6
- Views: 5748
- Fri Apr 04, 2003 11:38 pm
- Forum: s100/s200
- Topic: Code 1 O2 sensor error lights up while open loop
- Replies: 6
- Views: 4287
- Thu Mar 27, 2003 8:38 am
- Forum: s100/s200
- Topic: S200 and programming button
- Replies: 8
- Views: 5072
Re: Datalogging
I believe so, based on the feedback from other people.theseus824 wrote:Do you have to have Datalogging to set it using Hondalogger?
http://hondata.com/bb/viewtopic.php?t=493
http://hondata.com/bb/viewtopic.php?t=494
- Thu Mar 27, 2003 8:34 am
- Forum: s100/s200
- Topic: S200 and programming button
- Replies: 8
- Views: 5072
- Wed Mar 26, 2003 9:19 pm
- Forum: s100/s200
- Topic: S200 and programming button
- Replies: 8
- Views: 5072
Yes, it can be set within Hondalogger. Just launch Hondalogger and select the ECU tab. Press F10 to make the connection. Then make the various changes under the RPM Limits option. Regarding the push button method, I'm 100% sure it doesn't work using the stage 2/3/4 programming sequence. I'm thinking...
- Fri Mar 21, 2003 8:23 pm
- Forum: HondaLogger Software
- Topic: TPS voltage problem
- Replies: 5
- Views: 5292