Search found 8 matches

by Redsi15
Wed Aug 08, 2012 6:38 am
Forum: s300 / SManager
Topic: Deadtimes, help please
Replies: 1
Views: 1008

Deadtimes, help please

I have some precision 1000cc injectors. I can't get it to idle smoothly and was told it could be do to dead times. I've searched and searched and can't find deadtimes for them. Really need to get car on the road. I had flow tested and cleaned and they are flowing at 980cc. And if any other info need...
by Redsi15
Fri May 18, 2012 10:47 am
Forum: S300 Calibrations
Topic: Can someone check my map and datalog for B16a2
Replies: 1
Views: 1603

Can someone check my map and datalog for B16a2

Ok guys i got a map from a buddy and uploaded to the ecu. It starts and runs but you have to keep giving it gas to keep it running.. Can't get it to idle. Also the map had the cylinder fuel trim for cylinder 4 with 1% and cylinder 3 at 2%. Should i change these to 0? Something else i didnt understan...
by Redsi15
Tue May 15, 2012 11:03 am
Forum: S300 Calibrations
Topic: Need b16a2 turbo basemap
Replies: 2
Views: 2220

Re: Need b16a2 turbo basemap

Does anyone have any other maps to help me get started? closer to 1000cc injectors. this the map i made. Let me know if anything needs changed. I got deadtime and volts from injector rehab
by Redsi15
Wed Apr 18, 2012 11:24 am
Forum: S300 Calibrations
Topic: Need b16a2 turbo basemap
Replies: 2
Views: 2220

Need b16a2 turbo basemap

Hey fellas, Looking for a base map for my fully built b16 setup Manley H beam rods CP 10.5:1 pistons b16a2 .02mm over Supertech Nitrate coated racing valves, titanium retainers, dual racing springs locks Gsr Cams 60 trim t3/t4 turbo 38mm tial wastegate 2.5" downpipe percision 1000cc injectors L...
by Redsi15
Mon Sep 26, 2011 12:51 pm
Forum: s100/s200
Topic: PR4 ecu with S100 for B16?
Replies: 5
Views: 13118

Re: PR4 ecu with S100 for B16?

Spunkster wrote:It should not matter if it is an s100 or s200.
Thats what i was thinking too.. Maybe since my car sat for 2 years before being started.. There is something in there i need to figure out.+
Thanks man
by Redsi15
Mon Sep 26, 2011 10:56 am
Forum: s100/s200
Topic: PR4 ecu with S100 for B16?
Replies: 5
Views: 13118

Re: PR4 ecu with S100 for B16?

You need a vtec ECU to run a vtec engine with s100. If add vtec to my ecu when chipped with the hondata s100. But now they are saying that since the map was on a s200 before and i am using a s100 now that is causing my problems. Could that make a big difference in how the motor is running? thanks f...
by Redsi15
Sat Sep 24, 2011 11:26 am
Forum: s100/s200
Topic: PR4 ecu with S100 for B16?
Replies: 5
Views: 13118

Re: PR4 ecu with S100 for B16?

no one can help with anything? I dont see this setup to much. especially since its a non vtec ecu.. I am hoping that they just forgot to hook up the vtec.
by Redsi15
Fri Sep 23, 2011 5:47 pm
Forum: s100/s200
Topic: PR4 ecu with S100 for B16?
Replies: 5
Views: 13118

PR4 ecu with S100 for B16?

Hey guys i was just wondering if anyone knew the problems that you could run into if you use a PR4 ecu with S100 on a b16a2? It was just pointed out to me that hondata doesnt have the PR4 in the list of suitable ecu to use with hondata on my motor. So with that being said if anyone has any informati...