Search found 26 matches

by ash_rage
Fri Sep 07, 2012 1:43 am
Forum: FlashPro Manager
Topic: FlashProManager V1.3.7 (beta)
Replies: 23
Views: 8948

Re: FlashProManager V1.3.4 (beta)

Should be there in the tables window under 'Water temperature ignition retard'. The hidden table that has been screwing with EU FN2 tuners for quite some time now... funny how they couldn't figure it out. It was easy to fix even without direct access to this table. Thinking outside the box 4tw. ROF...
by ash_rage
Tue Jul 10, 2012 5:06 am
Forum: FlashPro Manager
Topic: reflash at honda dealership?
Replies: 4
Views: 3256

Re: reflash at honda dealership?

Firstly I live in the UK and I have an FN2, so whether this applies to other models or countries I do not know but... A while back a dealer said they updated my ECU software to my horror however after my intial panic it appeared my custom Flashpro cal was fine. On another occasion a Honda Master Tec...
by ash_rage
Tue Jul 10, 2012 4:50 am
Forum: FlashPro Manager
Topic: Afm with map fuel jerk off the throttle
Replies: 5
Views: 4878

Re: Afm with map fuel jerk off the throttle

nunoctr wrote:Thanks i will do this.
Hi nuno,

This is the same issue I had remember:

http://www.civinfo.com/forum/flashpro/6 ... ost1040975

It still feels a bit jerky but not as much.
by ash_rage
Tue Jul 10, 2012 4:44 am
Forum: FlashPro Manager
Topic: Fuel Gauge issue ?
Replies: 8
Views: 4347

Re: Fuel Gauge issue ?

This is due to the shape of the fuel tank in the FN2, you need more than 10 litres put in for it to register on the fuel gauge. The issue is nothing to do with Flashpro. The fuel tank is under the front seats and is wide and flat. The fuel gauge sender only moves 3 inches from top to bottom and so i...
by ash_rage
Wed Feb 22, 2012 7:56 am
Forum: FlashPro Manager
Topic: Using ELD or ECT2 to monitor other aftermarket sensor types
Replies: 5
Views: 2274

Re: Using ELD or ECT2 to monitor other aftermarket sensor ty

I use The ELD output to monitor my AFR wideband on my 2008 Euro CTR. It works but I can`t switch on my headlights when datalogging as the voltage level will sink below 13.6 volts and the AFR values are pegged at 12.7:1. My battery barely gets enough juice from the alternator to power additional ele...
by ash_rage
Thu Feb 16, 2012 10:05 am
Forum: FlashPro Manager
Topic: FlashProManager V1.2.7 (beta)
Replies: 59
Views: 22662

Re: FlashProManager V1.2.5 (beta)

And I agree with Vit. If you don't own a Flashpro, you have no business tuning one. So STFU. Dont tell us what to do and we will not tell you where to go , so STFU yourself bre. Anyone who has few brain in his had can open edit and save any cal without owning flashpro. If this limitation can be jum...
by ash_rage
Wed Nov 30, 2011 2:21 am
Forum: FlashPro Manager
Topic: Injector flow for fuel economy calc
Replies: 3
Views: 2218

Re: Injector flow for fuel economy calc

I'd start by checking the dead time values. The ID supplied values are way out - they calculate them electrically rather than by flow. Then decrease the economy flow rate until your actual mileage matches the dash (yes, this takes several tanks of gas). Ok thanks, thats what I have been doing but a...
by ash_rage
Tue Nov 29, 2011 2:22 am
Forum: FlashPro Manager
Topic: Injector flow for fuel economy calc
Replies: 3
Views: 2218

Injector flow for fuel economy calc

Hi, Can someone tell me what value I should be entering in the parameter "Injector flow for fuel economy calc". I have a UK FN2 with a AFM calibration and I am currently running 1.1.9.6 (beta). I run 725cc ID Injectors with my JRSC, we thought the value to enter here was 882cc/min but it is clearly ...
by ash_rage
Wed Nov 16, 2011 4:10 am
Forum: FlashPro Manager
Topic: Proposed fixes and ideas?
Replies: 17
Views: 7892

Re: Proposed fixes and ideas?

* Datalog stops when engine starts - possibly for a future version I have this issue also since updating to the lastest beta version. I previously reported it and was told the voltage was dropping too low during cranking, I have since got a new battery and the voltage is fine during cranking. The i...
by ash_rage
Fri Nov 04, 2011 2:56 am
Forum: FlashPro Manager
Topic: FlashProManager V1.1.9.6 (beta)
Replies: 132
Views: 44397

Re: FlashProManager V1.1.9.4 (beta)

Is it possible to lower the minimum idle rpm to 800 rpm for Civic FD2A? Which is the stock RPM for it. Whats with getting ignored here Hondata? I'm trying to support you guys to make your product better and bug free. At least give some response or something? Am I missing something here? Whats stopp...
by ash_rage
Thu Nov 03, 2011 4:33 pm
Forum: FlashPro Manager
Topic: FlashProManager V1.1.9.6 (beta)
Replies: 132
Views: 44397

Re: FlashProManager V1.1.9.4 (beta)

Assuming your customer is in Euro, that's the difference between US and Euro fuel. Yep I am in England. I have a tank full of 95 octane at the moment, I normally only run 99 octane. I dont envy your fuel quality in the states :-) Yeah but I bet you envy the price LOL I buy fuel by the gallon and no...
by ash_rage
Thu Nov 03, 2011 4:09 pm
Forum: FlashPro Manager
Topic: FlashProManager V1.1.9.6 (beta)
Replies: 132
Views: 44397

Re: FlashProManager V1.1.9.4 (beta)

Hondata wrote:Assuming your customer is in Euro, that's the difference between US and Euro fuel.
Yep I am in England.

I have a tank full of 95 octane at the moment, I normally only run 99 octane. I dont envy your fuel quality in the states :-)
by ash_rage
Thu Nov 03, 2011 3:09 am
Forum: FlashPro Manager
Topic: No oil warning light on Euro FN2
Replies: 10
Views: 4474

Re: No oil warning light on Euro FN2

Didnt know you was active on here Guy, hope your well. Anyway so the solution is to run the FN2 "AFM" cal now with the 1.1.9.4 and just use MAP fuel tables: http://www.hondata.com/forum/viewtopic.php?f=29&t=13076&p=58040#p58040 Theres no need to run a MAP cal/FD2 ROM (which is why none of the gauges...
by ash_rage
Thu Nov 03, 2011 3:06 am
Forum: FlashPro Manager
Topic: FlashProManager V1.1.9.6 (beta)
Replies: 132
Views: 44397

Re: FlashProManager V1.1.9.4 (beta)

but no oil pressure light on race cals for fn2 euro civic yet! Looks like pretty quick here there's not going to be any good reason to run a race cal on the fn2. Agreed, theres no need to run the race cal anymore. I'll test this in 9 hours and I or Vit will let you know the outcome. No such thing a...
by ash_rage
Sun Oct 30, 2011 1:03 am
Forum: FlashPro Manager
Topic: No oil warning light on Euro FN2
Replies: 10
Views: 4474

Re: No oil warning light on Euro FN2

Not working for me either and every FN2 owner on civinfo: http://www.civinfo.com/forum/flashpro/64692-new-flashpro-beta-check-those-running-map-tunes-2.html I notice previously you said this: http://www.hondata.com/forum/viewtopic.php?f=28&t=10940&start=15 However all our cars surely cannot be wired...