Search found 37 matches
- Tue Mar 04, 2008 6:03 pm
- Forum: s100/s200
- Topic: s200 and hondata supplied P28
- Replies: 3
- Views: 4130
- Tue Mar 04, 2008 1:24 am
- Forum: s100/s200
- Topic: s200 and hondata supplied P28
- Replies: 3
- Views: 4130
s200 and hondata supplied P28
i have just been reading up and noted that Preludes need to reverse the A6 and A11 Pins to run the P28.
is this done on the P28 itself ? or is this supposed to be done by the installer ?
is this done on the P28 itself ? or is this supposed to be done by the installer ?
- Wed Jan 16, 2008 6:00 pm
- Forum: s100/s200
- Topic: Capapcitor replacement
- Replies: 5
- Views: 4906
- Mon Jan 14, 2008 5:02 pm
- Forum: s100/s200
- Topic: Capapcitor replacement
- Replies: 5
- Views: 4906
yeah i can read still doesnt tell me the specs of the cap and whether hondata is sending out replacement for their previously socketed P28's we buy from them
Also i got the info from front page. Seems like info is different on different areas of site
www.hondata.com
Also i got the info from front page. Seems like info is different on different areas of site
www.hondata.com
- Sun Jan 13, 2008 9:03 pm
- Forum: s100/s200
- Topic: Capapcitor replacement
- Replies: 5
- Views: 4906
Capapcitor replacement
on the hondata webpage there is a note saying one of the capaicitors is being replaced.
What is the reason for this ?
Is hondata sending our replacement for all ecu's purchased through them.
What are the specs of the new capacitor ?
What is the reason for this ?
Is hondata sending our replacement for all ecu's purchased through them.
What are the specs of the new capacitor ?
- Fri Dec 07, 2007 6:28 pm
- Forum: s100/s200
- Topic: o2 sensor on dash in logger is 3.8V!
- Replies: 5
- Views: 6093
- Wed Dec 05, 2007 10:16 pm
- Forum: s100/s200
- Topic: o2 sensor on dash in logger is 3.8V!
- Replies: 5
- Views: 6093
- Fri Nov 30, 2007 5:32 pm
- Forum: HondaLogger Software
- Topic: what is the latest version of logger?
- Replies: 2
- Views: 16613
- Thu Nov 29, 2007 7:44 pm
- Forum: HondaLogger Software
- Topic: what is the latest version of logger?
- Replies: 2
- Views: 16613
what is the latest version of logger?
if i go to download from hondata site it is 3-5-5.
However from my hondata dealer he gave me 3-6-4 about 6 months ago.
What is the latest version ? It woud be good if the latest version
was downloadable from the site :).
However from my hondata dealer he gave me 3-6-4 about 6 months ago.
What is the latest version ? It woud be good if the latest version
was downloadable from the site :).
- Thu Nov 29, 2007 1:59 am
- Forum: s100/s200
- Topic: o2 sensor on dash in logger is 3.8V!
- Replies: 5
- Views: 6093
o2 sensor on dash in logger is 3.8V!
well i noticed my car running rich do i put on the logger. Output of o2 sensor was 3.8V?? i thought wtf..
so i put in a new sensor.... and guess what still 3.8v.
Could it be anything else ? or should i take the car out for a tune because she is running too rich
so i put in a new sensor.... and guess what still 3.8v.
Could it be anything else ? or should i take the car out for a tune because she is running too rich
- Wed Nov 08, 2006 3:46 am
- Forum: s100/s200
- Topic: S200 and WOT
- Replies: 4
- Views: 3240
- Tue Nov 07, 2006 2:21 am
- Forum: s100/s200
- Topic: h22 i/h/e....need a good map help!
- Replies: 5
- Views: 3651
..
yeah under the settings with the IAC written next to it :)
- Mon Nov 06, 2006 5:52 pm
- Forum: s100/s200
- Topic: S200 and WOT
- Replies: 4
- Views: 3240
i am tuning the car. SO what would cause the entire graph on low cam to read correctly, but when you dump WOT say at 200 rpm then some squares show up say orange. Even though you have gone through entire rev range and logged consistantly in the 13's A/F ratio wise. It only occurs say cruising at 150...
- Sat Nov 04, 2006 9:52 pm
- Forum: s100/s200
- Topic: S200 and WOT
- Replies: 4
- Views: 3240
S200 and WOT
Currently tuning my car.
I have all lo cam figures between 13.7 and 13. however i notice if i hit WOT at low rpm then in some places the logged AF ratio peak alot higher than what was originally learned.
Is there a setting where you can dump a lot more fuel if WOT is punched at low rpm ?
I have all lo cam figures between 13.7 and 13. however i notice if i hit WOT at low rpm then in some places the logged AF ratio peak alot higher than what was originally learned.
Is there a setting where you can dump a lot more fuel if WOT is punched at low rpm ?
- Sun Oct 22, 2006 12:22 pm
- Forum: HondaLogger Software
- Topic: wideband
- Replies: 6
- Views: 21522
hmmm
it might help if all the documents showed the s200 way and s300 way,
as most of the documentation is for s300.
Including setting up wideband :).
as most of the documentation is for s300.
Including setting up wideband :).