Search found 7 matches

by InsightRacer
Sat Mar 24, 2012 7:43 am
Forum: CR-Z 2010-2012 US/Europe/Asia
Topic: Does IAT compensation really work?
Replies: 2
Views: 3902

Re: Does IAT compensation really work?

Thanks, Hondata. That explains a lot.
by InsightRacer
Wed Mar 21, 2012 5:44 pm
Forum: CR-Z 2010-2012 US/Europe/Asia
Topic: Does IAT compensation really work?
Replies: 2
Views: 3902

Does IAT compensation really work?

Now that it's starting to get hot (here in the eastern US) I have been playing with the IAT Temperature Compensation feature. After a few days of trial and error, I'm not convinced it actually works. Today I did a test - driving to work (about a 1 hour drive in varied traffic). The L.Trim and S.Trim...
by InsightRacer
Wed Mar 14, 2012 6:23 pm
Forum: CR-Z 2010-2012 US/Europe/Asia
Topic: WOT/Open Loop very rich
Replies: 3
Views: 4225

Re: WOT/Open Loop very rich

If the closed loop is ok, but WOT is rich, then you need to change the WOT compensation tables. As stock they are super rich from 6000 rpm upwards. Don't make the WOT compensation table values any leaner than 12.5:1 in columns 8 and above, otherwise the ECU will never run in open loop. That's what ...
by InsightRacer
Wed Feb 01, 2012 7:40 pm
Forum: FlashPro Manager
Topic: Knock control
Replies: 4
Views: 2256

Re: Knock control

(Just responding in the hopes that I might learn something) FYI, on the CR-Z, a K.Control of ~100% is what you get with regular gas (87 Octane US). 93 Octane gives a K.Control of about 66%. On the CR-Z it looks the same on the stock (RTS) tune and Honda's stock tune. As Hondata said, its the ECUs es...
by InsightRacer
Wed Jan 04, 2012 6:27 pm
Forum: FlashPro Manager
Topic: Editing Indexes Not Working
Replies: 4
Views: 1487

Re: Editing Indexes Not Working

... The economy throttle table uses a dynamic calculation to change the throttle plate. So are you saying the actual throttle response in Economy will be adjusted dynamicly from the Economy Throttle table (i.e., the Hondata stock tables will behave like the stock Economy)? That would be great! It j...
by InsightRacer
Tue Jan 03, 2012 12:06 am
Forum: FlashPro Manager
Topic: Editing Indexes Not Working
Replies: 4
Views: 1487

Re: Editing Indexes Not Working

This is not something that is currently available, but we may make changes to this at a later date. OK, thanks for the response. I'm sure this isn't the most important change/fix that could be made. FYI, the reason that I wanted it was twofold. First, I don't like the agressive response on the Spor...
by InsightRacer
Sun Dec 25, 2011 8:56 am
Forum: FlashPro Manager
Topic: Editing Indexes Not Working
Replies: 4
Views: 1487

Editing Indexes Not Working

Editing Indexes doesn't work properly. On the CR-Z configuratons (at least the base one) it doesn work at all for any tables (it is greyed out). On the Civic-R18-RNA-1 configuration, it works for Fuel and Ignition tables but only works for Knock Limit tables and not the others and doesn't work for T...