Search found 20 matches

by core58
Fri Oct 19, 2012 10:20 am
Forum: TSX 2004-2014
Topic: Incorrect Cam advance vs Cam cmd!!
Replies: 4
Views: 3823

Re: Incorrect Cam advance vs Cam cmd!!

added oil (mid between low and hi marks), fired few more runs, VTC operations appear to be smooth, no chaotic advances/retards detected. The only thing i noticed that real advance is always a bit late from commanded degree, this happens when my VTC should rapidly move from 10 to 40 degrees, in a sho...
by core58
Thu Oct 18, 2012 3:58 am
Forum: TSX 2004-2014
Topic: Incorrect Cam advance vs Cam cmd!!
Replies: 4
Views: 3823

Re: Incorrect Cam advance vs Cam cmd!!

my thoughts were quite rushing so i forgot to mention some details: oil level is at LOW mark, will add some shortly and re-run. i waz using v.1.2.8, now upgraded to 1.3.7 beta and will try on this. i have Toda C cams and my cal is limited to 40 deg on hi cam, the above run pushed cam to 47-48 deg he...
by core58
Thu Oct 18, 2012 3:06 am
Forum: TSX 2004-2014
Topic: Incorrect Cam advance vs Cam cmd!!
Replies: 4
Views: 3823

Incorrect Cam advance vs Cam cmd!!

Hi, i've been datalogging few rides today, just to make sure that A/F is good hence no leaks in exhaust (i thought they could be due to some mechanical issues). However, i noticed something very strange was going with Cam advance, it was completely incorrect, i can even say - chaotic. That happened ...
by core58
Thu Sep 13, 2012 2:48 pm
Forum: FlashPro Calibrations
Topic: Need calibration for stock K24, 8.8:1 CR forged pistons
Replies: 3
Views: 2422

Re: Need calibration for stock K24, 8.8:1 CR forged pistons

mabo wrote:I pissed my pants )
Fine, dude.
It's about time for you to leave this thread and run to the bathroom
by core58
Wed Sep 12, 2012 2:06 pm
Forum: FlashPro Calibrations
Topic: Need calibration for stock K24, 8.8:1 CR forged pistons
Replies: 3
Views: 2422

Need calibration for stock K24, 8.8:1 CR forged pistons

hey fellows! i've had my engine rebuilt (forged pistons + rods) and looking to install the turbo stuff now. Until that i need some calibration that will be good for this stock low compression ratio engine, the base TSX 04 cal gives awful AFR at full and even part throttle, the air-fuel mixture is le...
by core58
Sun Apr 08, 2012 5:00 am
Forum: TSX 2004-2014
Topic: Flashpro triggers VSA error and blinking check engine symbol
Replies: 9
Views: 5562

Re: Flashpro triggers VSA error and blinking check engine sy

mabo wrote:
You surprized it works at all )) Works what ? Ecu flashing or VSA ?
i'm sure Hondata means its surprising that VSA works at all because it should NOT, since VSA using just the same line.
so if line fails to keep connection, VSA should fail as well.
by core58
Sun Apr 08, 2012 4:57 am
Forum: TSX 2004-2014
Topic: cant upload cal to ecu
Replies: 27
Views: 13155

Re: cant upload cal to ecu

Bard wrote:Any one tryed to heat ecu or flashpro with a hairdryer ?
not really yet.

Bard, do you experience just the same issue ?
if so, pls post your data
by core58
Thu Apr 05, 2012 10:27 am
Forum: TSX 2004-2014
Topic: Request for custom gear ratios
Replies: 1
Views: 1862

Re: Request for custom gear ratios

+1
need this feature urgently!

turbokit is coming along with 5 gears gearbox (4.1 final drive).
Boost-control won't work until we will be able to define gears , ratios and final drive
by core58
Fri Mar 30, 2012 12:29 pm
Forum: TSX 2004-2014
Topic: cant upload cal to ecu
Replies: 27
Views: 13155

Re: cant upload cal to ecu

Vehicle: EDM Accord CL9 + 07 TSX ECU / manual
Year: 2006
FP Serial#: FP-TSX-US-90028
by core58
Tue Mar 27, 2012 11:27 am
Forum: TSX 2004-2014
Topic: cant upload cal to ecu
Replies: 27
Views: 13155

Re: cant upload cal to ecu

mabo wrote:Yep core58 , i also dont see nothing annoying here ,
no i mean this IS annoyning
by core58
Tue Mar 27, 2012 12:12 am
Forum: TSX 2004-2014
Topic: cant upload cal to ecu
Replies: 27
Views: 13155

Re: cant upload cal to ecu

And the FINAL update for this story. I digged really HARD in this and found a post on tsxclub where the guy had same problem as me . He uploaded just fine after he drive his car. So it was warmed. I JUST WARMED MY CAR FOR 10 MINUTES AND CAL UPLOADED WITHOUT ANY ERRORS. ALL YOU GUYS WHO HAS SAME ERR...
by core58
Wed Mar 14, 2012 11:17 am
Forum: TSX 2004-2014
Topic: Honda Accord CL9 Euro 03-08 Model Flashpro works
Replies: 41
Views: 38480

Re: Honda Accord CL9 Euro 03-08 Model Flashpro works

Hondata, i just want... to THANK YOU SO MUCH! its so amazing my dashboard is clean after a year of constant CEL on (since i started using TSX reflash), that i cannot even believe it! Excellent work, thank you for the care and support! You're #1 in Honda tuning and performance! With love! cheers p.s....
by core58
Mon Mar 12, 2012 10:47 pm
Forum: TSX 2004-2014
Topic: Honda Accord CL9 Euro 03-08 Model Flashpro works
Replies: 41
Views: 38480

Re: Honda Accord CL9 Euro 03-08 Model Flashpro works

We only support the US 07-08 TSX. Okay, you do. i can even assume you don't have any accord CL9 instance around in the whole state... for the testing purposes. But look, we, the CL9 euro accord owners, do not ask for any support or rewards for testing the product on our own risk, right ? When you c...
by core58
Mon Mar 12, 2012 10:38 pm
Forum: TSX 2004-2014
Topic: FLashPro request for Euro CL9
Replies: 11
Views: 7751

Re: FLashPro request for Euro CL9

that will be pointless, a lot of money for very small gain, nobody wants to buy another ECU to use this we want flashpro to work with our ECU as they made it work for other EU cars (FN2, S2k,...) this is the request for you may consider using a simple Reflash instead with your CL9. You can benefit ...
by core58
Wed Mar 07, 2012 12:18 am
Forum: TSX 2004-2014
Topic: Honda Accord CL9 Euro 03-08 Model Flashpro works
Replies: 41
Views: 38480

Re: Honda Accord CL9 Euro 03-08 Model Flashpro works

was glad to see new version (1.2.7) release, but when installed it and updated firmware i saw the error P0453 is still on the board.
what a disappointment...

Hondata can you please fix it ?