Search found 39 matches

by K_A_N_O
Thu Jul 30, 2020 3:57 am
Forum: TSX 2004-2014
Topic: ECU swapping questions
Replies: 10
Views: 7807

ECU swapping questions

Hi everyone. I have a 2004 TSX . If I fit a 2007 TSX ECU and fit matching immobilizer and swap the chip from the key will it start? Or do I still need to get the ECU paired at Honda? So I have matching 07 rbb-a71 ECU, immobilizer and key. Just trying to save myself a trip to the honda dealer. Thanks
by K_A_N_O
Fri May 17, 2013 11:25 am
Forum: FlashPro Manager
Topic: calibration & table screens blank, why????
Replies: 2
Views: 2355

Re: calibration & table screens blank, why????

ahh that would be why then.

thankyou
by K_A_N_O
Fri May 17, 2013 11:10 am
Forum: FlashPro Manager
Topic: calibration & table screens blank, why????
Replies: 2
Views: 2355

calibration & table screens blank, why????

hey guys i need some help. i recorded a datalog yesterday that im looking over on flashpro manager. The calibration and table screen are blank and dont show data :s the graph and display screens are fine. why cant i see the data??? i did have it tuned at the tuners so would it be that he may have lo...
by K_A_N_O
Thu May 16, 2013 9:54 am
Forum: TSX 2004-2014
Topic: NEWB!
Replies: 7
Views: 6800

Re: NEWB!

tuning is hard to get your head around man.

i took mine to the tuners. straight away he gained 20bhp over the base map. he said the base map was way out and running really rich.
by K_A_N_O
Wed May 15, 2013 9:37 am
Forum: TSX 2004-2014
Topic: 03-06 CAN adapter harness problem(Accord Euro)
Replies: 22
Views: 17547

Re: 03-06 CAN adapter harness problem(Accord Euro)

just copied my post for you all thats how mine looks.

as you can see the can bus connector is grey, not green.
by K_A_N_O
Wed May 15, 2013 9:36 am
Forum: TSX 2004-2014
Topic: 03-06 CAN adapter harness problem(Accord Euro)
Replies: 22
Views: 17547

Re: 03-06 CAN adapter harness problem(Accord Euro)

FlashPro works perfectly with our UKDM CL9's all you need is an acura TSX 07-08 ecu, part number 37820-RBB-A21. and of course FlashPro itself, part number FP-TSX-US depending on the year of your accord depends on if you need the can bus adapter harness. (only two wires) pre facelift CL9's (03-06) do...
by K_A_N_O
Mon Feb 25, 2013 11:46 am
Forum: FlashPro Manager
Topic: adjusting speedo. help please.
Replies: 26
Views: 17007

Re: adjusting speedo. help please.

damn! whats the final drive like? must be like a rocket! yea i know i can wire in a speedo healer but if it works with flashpro then i cant see the point. im not really bothered too much about the odometer not working correctly. as i have no intention of selling the car. how many miles did you driv...
by K_A_N_O
Fri Feb 22, 2013 11:10 am
Forum: FlashPro Manager
Topic: adjusting speedo. help please.
Replies: 26
Views: 17007

Re: adjusting speedo. help please.

I am from Spain. I have an Accord CL9. Gear1>3.533 Gear2>1.88 Gear3>1.354 Gear4>1.027 Gear5>0.825 Gear6>0.659 Final Gear Ratio>5.062 (Civic FN2) I have a "yellow jacket" to correct the speed, but yesterday I used the flashpro speed adjustment. I tried a -10% speed adjustment. The speed sh...
by K_A_N_O
Thu Feb 21, 2013 2:00 pm
Forum: FlashPro Manager
Topic: adjusting speedo. help please.
Replies: 26
Views: 17007

Re: adjusting speedo. help please.

Do you have the calibration saved on your laptop? If yes, then just locate the file and open it in the FlashPro Manager software. no im affraid not. it was tuned at the tuners. using my flashpro and their laptop. is it possible to load the current map on my ecu onto my laptop? as i really do not wa...
by K_A_N_O
Thu Feb 21, 2013 1:12 pm
Forum: FlashPro Manager
Topic: adjusting speedo. help please.
Replies: 26
Views: 17007

Re: adjusting speedo. help please.

Do you have the calibration saved on your laptop? If yes, then just locate the file and open it in the FlashPro Manager software. no im affraid not. it was tuned at the tuners. using my flashpro and their laptop. is it possible to load the current map on my ecu onto my laptop? as i really do not wa...
by K_A_N_O
Wed Feb 20, 2013 11:27 am
Forum: FlashPro Manager
Topic: adjusting speedo. help please.
Replies: 26
Views: 17007

Re: adjusting speedo. help please.

i know this probably sounds like a dumb newbie question. but how do i load the current map? the only thing ive done with flashpro was upload a base calibration so i could get it to the tuners. thanks Open the same base calibration, modify speed adjustment, save as (name that you want) and upload th...
by K_A_N_O
Tue Feb 19, 2013 11:30 am
Forum: FlashPro Manager
Topic: adjusting speedo. help please.
Replies: 26
Views: 17007

Re: adjusting speedo. help please.

You will have to load the calibration that your vehcile is currently running on and make whatever changes you want to make and then upload the entire calibration to the ECU. You must firest determine which item needs adjustment, the ECU reading or the dash reading, then start making changes and see...
by K_A_N_O
Tue Feb 19, 2013 11:19 am
Forum: FlashPro Manager
Topic: adjusting speedo. help please.
Replies: 26
Views: 17007

Re: adjusting speedo. help please.

For some vehicles the speed signal goes from the sensor -> ECU -> dash. In this case, the dash speed can be altered in the ECU. For other vehicles, the speed signal goes from the sensor to both the ECU & dash. In that case, the dash speed cannot be altered by the ECU (which is why it is not sho...
by K_A_N_O
Mon Feb 18, 2013 2:05 pm
Forum: FlashPro Manager
Topic: adjusting speedo. help please.
Replies: 26
Views: 17007

adjusting speedo. help please.

hey guys. i need to adjust my speedo. how do i adjust the speedo without loosing the current map on the ecu? as i dont want to loose it all. also which parameters on this should i change? http://www.hondata.com/help/flashpro/speed-adj.gif ecu, dash or both? my ratios were ukdm cl9 tsx 1, 3.533 2, 1....
by K_A_N_O
Mon Jan 21, 2013 5:12 am
Forum: TSX 2004-2014
Topic: UKDM CL9 Flashpro green canbus connector???
Replies: 14
Views: 13100

Re: UKDM CL9 Flashpro green canbus connector???

Hi KANO, Do either of you guys have the UKDM wiring diagram for the ECU ?, specifically the E Connector ? Reason I ask is I am trying to do the same (fit Flash Pro), BUT to a JDM CM2 down here in New Zealand. The wiring of the E Connector is very different to the UDSM TSX ECU that I will replace th...