Search found 19520 matches

by Spunkster
Fri Apr 09, 2021 3:49 pm
Forum: K-Pro / KManager
Topic: K pro wont connect via USB after 4.4.6 update
Replies: 3
Views: 33

Re: K pro wont connect via USB after 4.4.6 update

unplug the ECU from the vehicle and then only plug in the USB and see if it will update firmware.
by Spunkster
Fri Apr 09, 2021 2:36 pm
Forum: K-Pro / KManager
Topic: K pro wont connect via USB after 4.4.6 update
Replies: 3
Views: 33

Re: K pro wont connect via USB after 4.4.6 update

What is the serial number that is on the K-Pro board?
by Spunkster
Fri Apr 09, 2021 10:45 am
Forum: FlashPro Manager
Topic: Flashpro civic r18 shift full throttle
Replies: 3
Views: 42

Re: Flashpro civic r18 shift full throttle

No, the R18 does not have traction control support.
by Spunkster
Fri Apr 09, 2021 10:44 am
Forum: FlashPro Calibrations
Topic: DBW Pedal Calibration
Replies: 3
Views: 32

Re: DBW Pedal Calibration

You will need to discuss this with Ariel and see what they recommend.
by Spunkster
Fri Apr 09, 2021 10:43 am
Forum: Civic Type R 2015+
Topic: Xdi pump enabled?
Replies: 7
Views: 101

Re: Xdi pump enabled?

No, it will not.
by Spunkster
Fri Apr 09, 2021 10:42 am
Forum: Applications
Topic: Soild CEL, NO codes
Replies: 4
Views: 39

Re: Soild CEL, NO codes

If it works in another vehicle and other ECUs have the same problem, then you have a wiring issue and could be any number of things. This is why it is not a good idea to start removing things as it usually causes problems.
by Spunkster
Fri Apr 09, 2021 10:39 am
Forum: FlashPro Calibrations
Topic: PRL turbo inlet
Replies: 10
Views: 842

Re: PRL turbo inlet

It may need to be properly tuned with a larger MAF housing.
by Spunkster
Thu Apr 08, 2021 11:11 am
Forum: FlashPro Manager
Topic: This is not the vehicle the flashpro was locked to
Replies: 3
Views: 32

Re: This is not the vehicle the flashpro was locked to

Feedback was sent with the OBD2 port disconnected.
by Spunkster
Thu Apr 08, 2021 11:09 am
Forum: s300 / SManager
Topic: MTX-D EThanol Sensor reading high!
Replies: 5
Views: 52

Re: MTX-D EThanol Sensor reading high!

I have reproduced what you have described on the bench and let the software engineer know. I do not know if it is something we will be able to solve in a short time.
by Spunkster
Thu Apr 08, 2021 9:11 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: P0087 Error Code Civic EX Hatch 2017 CVT
Replies: 1
Views: 32

Re: P0087 Error Code Civic EX Hatch 2017 CVT

More than likely it is a problem with the low pressure pump. If you return it to stock and the problem persists, you should discuss the issue with the Honda dealer.
by Spunkster
Thu Apr 08, 2021 9:04 am
Forum: FlashPro Calibrations
Topic: DBW Pedal Calibration
Replies: 3
Views: 32

Re: DBW Pedal Calibration

Nothing should have to be done for it to work.
by Spunkster
Wed Apr 07, 2021 2:52 pm
Forum: s300 / SManager
Topic: MTX-D EThanol Sensor reading high!
Replies: 5
Views: 52

Re: MTX-D EThanol Sensor reading high!

Post the calibration as well as a datalog showing the issue.
by Spunkster
Wed Apr 07, 2021 12:15 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: 2016 Turbo Touring
Replies: 1
Views: 25

Re: 2016 Turbo Touring

replied to the email you sent.
by Spunkster
Mon Apr 05, 2021 3:31 pm
Forum: Civic Si 2006-2011 Americas
Topic: Rev match 07 si
Replies: 1
Views: 45

Re: Rev match 07 si

This is not possible as there is not a shifter position sensor.
by Spunkster
Mon Apr 05, 2021 9:24 am
Forum: K-Pro / KManager
Topic: TPS Reads 0 or 1 When Engine Is Running
Replies: 1
Views: 30

Re: TPS Reads 0 or 1 When Engine Is Running

It sounds like either a problem with the TPS sensor, or a problem with the wiring. You should try your ECU in a known working vehicle and see if it reads correctly. Use process of elimination to determine where the issue is.