Search found 36 matches
- Thu Nov 24, 2016 1:31 am
- Forum: TL 2007-2008
- Topic: IAT compensation
- Replies: 4
- Views: 12005
Re: IAT compensation
Let me first explain some new issues I'm having here lately and hopefully you can lead me in the right direction. I've switched from running pump gas to e85 and in the warmer months I had very little fluctuations in my AFRs but now that the cooler months are approaching, I've began to have some even...
- Thu Oct 20, 2016 11:12 pm
- Forum: FlashPro Manager
- Topic: Corrupted Datalogs on FlashPro
- Replies: 2
- Views: 2240
Re: Corrupted Datalogs on FlashPro
I know it's been some time since this thread was made but I wanted to share my experience with this same issue and retrieving corrupt datalog files from the FlashPro unit. I've noticed (in my case) ONLY when I datalog using a calibration file that's been Live Tuning enabled, it will do this. It's re...
- Mon Aug 22, 2016 7:24 pm
- Forum: TL 2007-2008
- Topic: IAT compensation
- Replies: 4
- Views: 12005
Re: IAT compensation
I'm assuming since the remaining question was disregarded, that translates to a "no"?
I am really struggling with this issue especially now that fall is beginning to show its face.
I am really struggling with this issue especially now that fall is beginning to show its face.
- Sun Aug 07, 2016 10:09 pm
- Forum: TL 2007-2008
- Topic: IAT compensation
- Replies: 4
- Views: 12005
IAT compensation
Was trying to narrow down an issue I've been having with low load knock and noticed something unusual so I assumed it best to ask instead of not knowing. The questions is, does the "air temperature fuel compensation cranking" table ONLY apply to cranking events or does it affect AFR's afte...
- Fri Jul 29, 2016 7:54 pm
- Forum: TL 2007-2008
- Topic: Acquiring "bricks" to build a new home here...
- Replies: 8
- Views: 12265
Re: Acquiring "bricks" to build a new home here...
Interesting. Got it. Thanks for the help. :)
- Thu Jul 28, 2016 7:02 pm
- Forum: TL 2007-2008
- Topic: Acquiring "bricks" to build a new home here...
- Replies: 8
- Views: 12265
Re: Acquiring "bricks" to build a new home here...
Really, where does it say this on FlashPro, did I overlook this? My last ECM did the same thing but was never informed to upload the log last time. Was there something different about this reported symptom/issue that clues you guys in on the need to mail in my ECM/FlashPro that I can know what to lo...
- Wed Jul 27, 2016 8:06 pm
- Forum: TL 2007-2008
- Topic: Acquiring "bricks" to build a new home here...
- Replies: 8
- Views: 12265
Re: Acquiring "bricks" to build a new home here...
Oddly enough, the ecu just accepted a reflash. It's working....for now. Please look at the log anyways and (hopefully) shed some light on what happened. Thanks again.
- Wed Jul 27, 2016 7:56 pm
- Forum: TL 2007-2008
- Topic: Acquiring "bricks" to build a new home here...
- Replies: 8
- Views: 12265
Re: Acquiring "bricks" to build a new home here...
Sent requested information just now. Thank you.
- Wed Jul 27, 2016 1:02 pm
- Forum: TL 2007-2008
- Topic: Acquiring "bricks" to build a new home here...
- Replies: 8
- Views: 12265
Re: Acquiring "bricks" to build a new home here...
Will do. Thanks.
- Tue Jul 26, 2016 11:46 pm
- Forum: TL 2007-2008
- Topic: Acquiring "bricks" to build a new home here...
- Replies: 8
- Views: 12265
Acquiring "bricks" to build a new home here...
Around 1-2 years ago, I had an issue with my ECM not communicating suddenly after a reflash and after discussing the matter with you guys through email, it was decided that I would have to send my old ECM and FlashPro in to unlock the two so that it could be locked with a replacement ECM. Did that a...
- Fri Jul 15, 2016 6:44 pm
- Forum: TL 2007-2008
- Topic: Top speed limiter
- Replies: 17
- Views: 23060
Re: Top speed limiter
Automatics will only work properly with the stock map sensor, since we cannot reprogram the transmission code. It is looking only for stock map sensor voltages, so when a different map sensor is installed it throws it all off. Isn't it a bit premature in the conversation for us to presume it's the ...
- Fri Jul 15, 2016 6:31 pm
- Forum: General / Traction Control Manager Software
- Topic: ELD input
- Replies: 4
- Views: 10730
Re: ELD input
Thank you.
- Thu Jul 14, 2016 8:11 pm
- Forum: General / Traction Control Manager Software
- Topic: ELD input
- Replies: 4
- Views: 10730
Re: ELD input
You must purchase traction control to be able to use it. If you try without purchasing it, you will only cause problems for yourself. I'm running FlashPro for the 07 TL-S and need some sort of method to give me some pretty gnarly ignition retard for an anti lag setup I plan on using. I have an AEM ...
- Thu Jul 14, 2016 8:04 pm
- Forum: TL 2007-2008
- Topic: Top speed limiter
- Replies: 17
- Views: 23060
Re: Top speed limiter
What MAP sensor are you using? Alright, I've got the 4 bar Hondata MAP and due to the question you asked, I just went to your parts page and read up on it on the side note below the sensors description. I'm assuming this is because the sensors resolution isn't compatible with the TL's ecu or what i...
- Wed Jul 13, 2016 11:41 pm
- Forum: General / Traction Control Manager Software
- Topic: ELD input
- Replies: 4
- Views: 10730
ELD input
Wanted to know if the ELD pin can be used with the traction control settings in FlashPro WITHOUT having a traction control system? In other words, does FlashPro require the Traction Control to be purchased and installed to enable the settings in the calibration?
Thanks.
Thanks.