Search found 36 matches

by BongoBennie
Thu Aug 24, 2023 10:29 am
Forum: K-Pro / KManager
Topic: Modified Alternator
Replies: 1
Views: 1180

Modified Alternator

I have a Kswapped/Kpro'd street car (Insight) and a 320a Mechman alternator for my stereo system. I had it modified including one wire turn on. My question is about leaving the original plug disconnected since the original 4wire plug is deleted. I'm not worried about the alt warning light since I ha...
by BongoBennie
Mon Jan 16, 2023 11:07 pm
Forum: K-Pro Calibrations
Topic: Stock K24a4 basemap on PRB file
Replies: 2
Views: 1039

Stock K24a4 basemap on PRB file

I have a bone stock K24a4 engine and it runs fine on the Accord basemap but I need it on a PRB file to unlock a few functions.... I tried to paste and copy everything myself but the car barely runs... is there solution to this? I do plan on tuning but I want to shakedown the car before hand.
by BongoBennie
Thu Apr 15, 2021 5:41 pm
Forum: K-Pro / KManager
Topic: is a "High Idle Switch" possible?
Replies: 1
Views: 346

is a "High Idle Switch" possible?

I have Kpro-V4 equipped car with high output audio system. I would like to "throw a switch" to induce a high idle around 2000rpm. Car has A/C and will be on while in "LIstening mode" so I cannot use the A/C circuit. Is this possible with Kpro?
by BongoBennie
Sun Apr 04, 2021 12:15 pm
Forum: K-Pro / KManager
Topic: Air Conditioning
Replies: 1
Views: 511

Air Conditioning

Kswapped Insight, A/C is working but ECU is bypassed. Searching high and low trying to figure out how to wire in ECU but all I can find is vehicle specific questions that don’t explain exactly how it works. Can anyone post a generic diagram link? I feel like the advice I’m getting will let the ECU k...
by BongoBennie
Sun Feb 07, 2021 7:22 pm
Forum: K-Pro / KManager
Topic: AEM 30-4110 wb with PNF tune and ecu
Replies: 3
Views: 615

AEM 30-4110 wb with PNF tune and ecu

I'm running PNF ECU and tune, I want to run AEM 30-4110 as primary O2. I have all this installed already and now finding that PNF tunes do not allow external Wideband. I would think I could at worst start with a new tune from PRB file but will there be an issue with the PNF ECU?
by BongoBennie
Mon Jul 22, 2019 9:37 am
Forum: K-Pro / KManager
Topic: its 2019, looking for best KPro specific tuning tool (PC)
Replies: 4
Views: 1671

Re: its 2019, looking for best KPro specific tuning tool (PC)

Yeah, I'm perfectly fine using my macbook although I haven't seen anything directly related to using one with Parallels, it's also been a long time since Ive use any kind of windows anything on a Mac so buying a PC for a few hundred is cool, buying a 12 year old piece of crap that I can't see/use wi...
by BongoBennie
Sun Jul 21, 2019 10:24 pm
Forum: K-Pro / KManager
Topic: its 2019, looking for best KPro specific tuning tool (PC)
Replies: 4
Views: 1671

its 2019, looking for best KPro specific tuning tool (PC)

Hello, My last Hondata experience was V1 Kpro/Asus XP USB cable. I plan on playing with mine quite a bit and was planning on using my 11" Macbook Air w/ Parallels (would this work bluetooth should I go this route?) (also please confirm there is no KManager on ipad) . I can imagine though for a ...
by BongoBennie
Wed Apr 03, 2019 4:26 pm
Forum: K-Pro / KManager
Topic: Injector driver question
Replies: 3
Views: 1817

Re: Injector driver question

1.5 years later and were at this again.

With 2 injector drivers can driver #1 run low impedance main injectors and driver #2 run secondary additional set? Run with Kpro v4
by BongoBennie
Thu Jan 31, 2019 9:50 pm
Forum: K-Pro / KManager
Topic: Traction control on PNF ECU?
Replies: 1
Views: 764

Traction control on PNF ECU?

Will traction control hook up tp EP3 PNF ECU with V4 KPro?
by BongoBennie
Fri Jan 25, 2019 10:19 am
Forum: K-Pro / KManager
Topic: Canadian EP3 ECU same as US version?
Replies: 3
Views: 920

Re: Canadian EP3 ECU same as US version?

Can you tell me if immobilizer can be programmed at dealer as it will be going into an EP3
by BongoBennie
Thu Jan 24, 2019 9:32 pm
Forum: K-Pro / KManager
Topic: Canadian EP3 ECU same as US version?
Replies: 3
Views: 920

Canadian EP3 ECU same as US version?

I found a good deal on an EP3 ECU and it comes from canada, is this suitable/same for a USDM car?
by BongoBennie
Tue Dec 04, 2018 8:52 pm
Forum: General / Traction Control Manager Software
Topic: Traction control alternate output?
Replies: 1
Views: 8354

Traction control alternate output?

Traction control alternate output? I would like to use the traction control to activate a clutch rather than the standard functions, I would still need access to the software via K manager but want nothing more than to light a bulb turn on when the tires slip. Can this be done either directly from T...
by BongoBennie
Wed Dec 27, 2017 10:54 pm
Forum: FlashPro Manager
Topic: FlashProManager V2.8.7
Replies: 32
Views: 31414

Re: FlashProManager V2.8.7

Hondata wrote: Thu Dec 21, 2017 11:34 am The RDX would be the only other ECU we would consider at the moment for flex fuel.
Does this mean that there is hope that the Fit will one day feature this or should We not hold our breath?
by BongoBennie
Sat Dec 23, 2017 11:39 am
Forum: Non-Hondata
Topic: TSX/Honda automatic Expertise needed.
Replies: 0
Views: 8823

TSX/Honda automatic Expertise needed.

My ultimate goal is based around the 07-08 Element automatic 5 speed AWD transmission into a small street car with AC. Since the TSX is very similar to the Element it seems possible to "swap" the E trans into an 07-08 TSX as far as ECU goes, if thats the case I could use a K20 instead? kee...