Hi Everyone,
The customer contacted me today and said that the engine had a bottom end failure due to lack of oil pressure. We are assuming at this point that the cause was due to an oil pressure supply problem not being able to keep the engine in VTEC.
Thank you for your help, anyway.
Sander
Search found 34 matches
- Tue Sep 13, 2016 3:22 pm
- Forum: K-Pro / KManager
- Topic: K-Pro V4 / S2000 Misfire Problem
- Replies: 5
- Views: 2784
- Wed Aug 17, 2016 4:55 pm
- Forum: K-Pro / KManager
- Topic: K-Pro V4 / S2000 Misfire Problem
- Replies: 5
- Views: 2784
Re: K-Pro V4 / S2000 Misfire Problem
The injector pulse plot follows the torque curve rather closely (probably indicating that there is a relatively steady fuel pressure plot), and the lambda measurement (taken from the header) beneath the dyno chart is quite steady at 0.87. I feel that it's unlikely this is a fuel related issue. There...
- Wed Aug 17, 2016 3:54 pm
- Forum: K-Pro / KManager
- Topic: K-Pro V4 / S2000 Misfire Problem
- Replies: 5
- Views: 2784
K-Pro V4 / S2000 Misfire Problem
Hello, I've got an AP1 S2000 with a brand new K-Pro V4. It seems to encounter a rev-limiter type symptom above 7500 rpm, while the over-all limiter is set to 8400 rpm. Attached is a log, the calibration file, and the dyno plot. -The engine has stock S2000 plugs. -Have tried new coils. -Have tried ne...
- Mon Dec 16, 2013 1:06 pm
- Forum: K-Pro / KManager
- Topic: Nitrous Control, Knock count maximum
- Replies: 3
- Views: 2093
Re: Nitrous Control, Knock count maximum
You should have this in the Nitrous Help file, or explicitly written somewhere obvious.
- Fri Dec 13, 2013 6:15 pm
- Forum: K-Pro / KManager
- Topic: Nitrous Control, Knock count maximum
- Replies: 3
- Views: 2093
Nitrous Control, Knock count maximum
Hello, I was recently tuning a car that had a Knock Count condition maximum of 0 in the Nitrous Control -> Settings Tab. We were going to try a larger dry shot with pump gas. I felt safe being that if the Knock Count exceeded 0, the ECU would de-activate the relay that was powering the solenoid. Lon...
- Tue Jul 10, 2012 8:23 pm
- Forum: Romeditor 4 Software
- Topic: RomEditor4 Logging Problem
- Replies: 1
- Views: 14789
RomEditor4 Logging Problem
"List index out of bounds"
Any feedback? The software works correctly otherwise. This message only comes up if I try to view a graph after logging.
Thanks.
Any feedback? The software works correctly otherwise. This message only comes up if I try to view a graph after logging.
Thanks.
- Thu Aug 05, 2010 8:03 am
- Forum: Romeditor 4 Software
- Topic: Windows 7, 64 bit, driver installation error code 10.
- Replies: 13
- Views: 28017
- Wed Aug 04, 2010 2:22 pm
- Forum: Romeditor 4 Software
- Topic: Windows 7, 64 bit, driver installation error code 10.
- Replies: 13
- Views: 28017
- Tue Aug 03, 2010 6:21 pm
- Forum: Romeditor 4 Software
- Topic: Windows 7, 64 bit, driver installation error code 10.
- Replies: 13
- Views: 28017
- Tue Aug 03, 2010 6:14 pm
- Forum: Romeditor 4 Software
- Topic: Windows 7, 64 bit, driver installation error code 10.
- Replies: 13
- Views: 28017
- Tue Aug 03, 2010 6:12 pm
- Forum: Romeditor 4 Software
- Topic: Windows 7, 64 bit, driver installation error code 10.
- Replies: 13
- Views: 28017
- Tue Aug 03, 2010 10:51 am
- Forum: Romeditor 4 Software
- Topic: Windows 7, 64 bit, driver installation error code 10.
- Replies: 13
- Views: 28017
- Tue Aug 03, 2010 8:20 am
- Forum: Romeditor 4 Software
- Topic: Windows 7, 64 bit, driver installation error code 10.
- Replies: 13
- Views: 28017
- Sun Aug 01, 2010 2:33 pm
- Forum: Romeditor 4 Software
- Topic: Windows 7, 64 bit, driver installation error code 10.
- Replies: 13
- Views: 28017
Windows 7, 64 bit, driver installation error code 10.
Hey Guys, I've got a new copy of Windows 7 (64 Bit). I'm having an issue assigning the drivers to the RE4 cable. The device does not install properly. What seems to be different about windows 7 as opposed to XP which I'm very familiar with, is that when you plug in a USB device for the first time it...
- Wed Jun 24, 2009 7:28 am
- Forum: K-Pro / KManager
- Topic: S2000 Ignition Timing Drift?
- Replies: 9
- Views: 3961