Search found 7 matches

by HPE
Sun Jun 01, 2014 12:12 am
Forum: K-Pro Calibrations
Topic: K20A2 - knock issues
Replies: 13
Views: 4207

Re: K20A2 - knock issues

Ok, attached is a datalog from the trackday today. Plenty of knock to analyse unfortunately :( After looking at this I called it quits for the day (it was also wet so very little to be gained from continuing). Cal also attached for reference. Very appreciative of any thoughts as to what's wrong with...
by HPE
Mon May 26, 2014 7:56 pm
Forum: K-Pro Calibrations
Topic: K20A2 - knock issues
Replies: 13
Views: 4207

Re: K20A2 - knock issues

Great, thanks alot for this. I probably won't get a chance to do another run until the weekend though (I have a track day on Sunday which would be ideal).

BTW, I couldn't work out how to do the datalog in open loop.
by HPE
Mon May 26, 2014 6:25 pm
Forum: K-Pro Calibrations
Topic: K20A2 - knock issues
Replies: 13
Views: 4207

Re: K20A2 - knock issues

Thanks for taking a look, much appreciated.

In terms of the fueling, which area's should I be looking to fix?
by HPE
Sun May 25, 2014 6:22 pm
Forum: K-Pro / KManager
Topic: Lotus Dash Driver
Replies: 7
Views: 2563

Re: Lotus Dash Driver

Not sure if it answers your question but I'm running the original Stack dash in my 2000 S1 Elise (non-Federal obviously! - Australian delivered) and a K20A with the Hondata Kpro.

Can't help with the technical know-how but it seems as though it should be do-able for you.
by HPE
Sat May 24, 2014 11:17 pm
Forum: K-Pro Calibrations
Topic: K20A2 - knock issues
Replies: 13
Views: 4207

Re: K20A2 - knock issues

I did some 3rd gear runs today in the attached file. Wasn't getting much knock but how does it look otherwise?

Thanks
by HPE
Sat May 24, 2014 2:41 pm
Forum: K-Pro Calibrations
Topic: K20A2 - knock issues
Replies: 13
Views: 4207

Re: K20A2 - knock issues

I have the datalog set to start automatically on WOT which is why the log isn't all that complete (the Lotus has a lack of spare signals to use as a switch so I need to work something out there).

I will try and do a 3rd gear run today and post up the results.

Thanks for your help.
by HPE
Fri May 23, 2014 8:06 pm
Forum: K-Pro Calibrations
Topic: K20A2 - knock issues
Replies: 13
Views: 4207

K20A2 - knock issues

I have a Lotus Elise with a K20A2 conversion and have been experiencing knock. I have had the car dyno-tuned at a local Hondata distributor. Since then I'm still getting knock - initially I thought it was only in hot weather but recently I logged some knock in cooler weather. Comparing the tune (ign...