Search found 14 matches

by TJAPZ0RRO
Tue Sep 29, 2015 1:13 am
Forum: K-Pro / KManager
Topic: KPro / KManager requests
Replies: 146
Views: 830089

Re: KPro / KManager requests

Ignition retard activated by clutch switch input : )

Edit: You don't want to retard with every shift, only for full throttle shift ..

So, ignition retard after clutch switch input AND tps 90%+

-TJAP
by TJAPZ0RRO
Fri Oct 03, 2014 3:02 am
Forum: K-Pro / KManager
Topic: KPRO update and EDM EP3 gear ratio
Replies: 2
Views: 2047

Re: KPRO update and EDM EP3 gear ratio

Spunkster wrote:You do not have to select from a list. You can enter them manually.
Thanks Spunkster : ) !
by TJAPZ0RRO
Thu Oct 02, 2014 1:58 pm
Forum: K-Pro / KManager
Topic: KPRO update and EDM EP3 gear ratio
Replies: 2
Views: 2047

KPRO update and EDM EP3 gear ratio

After the last KRPO update I can't pick the EDM EP3 gear ratio .. Its now like this: http://i258.photobucket.com/albums/hh241/Srracing02/GearRatio_zpsb27f79f9.png It must be this: http://i258.photobucket.com/albums/hh241/Srracing02/EDMEP3GearRatio_zps2658a865.png Can I simply take the 2005 RSX Type ...
by TJAPZ0RRO
Sun Jun 29, 2014 10:35 am
Forum: K-Pro Calibrations
Topic: KPRO custom clutch switch in use with e22 ?
Replies: 15
Views: 10417

Re: KPRO custom clutch switch in use with e22 ?

Ok, I'm pretty clue less at the moment, I've pinned from E29 to E22 and now it doesn't work .. And if I pin it back to E29 it works, so my switch is working .. If I in invert on E22 it works, always .. clutch or no clutch .. Whats wrong (I know for sure E22 was used) ? Hope for some help .. Edit: I ...
by TJAPZ0RRO
Thu Jun 19, 2014 1:05 pm
Forum: K-Pro Calibrations
Topic: KPRO custom clutch switch in use with e22 ?
Replies: 15
Views: 10417

Re: KPRO custom clutch switch in use with e22 ?

Spunkster wrote:Why not use E22 as you originally said you were going to
True,

Im going to try E22.
by TJAPZ0RRO
Thu Jun 19, 2014 12:45 pm
Forum: K-Pro Calibrations
Topic: KPRO custom clutch switch in use with e22 ?
Replies: 15
Views: 10417

Re: KPRO custom clutch switch in use with e22 ?

Spunkster wrote:Don't use E29, use one of the other inputs.
Like ?
by TJAPZ0RRO
Thu Jun 19, 2014 9:46 am
Forum: K-Pro Calibrations
Topic: KPRO custom clutch switch in use with e22 ?
Replies: 15
Views: 10417

Re: KPRO custom clutch switch in use with e22 ?

Undo what you have done and see if it acts normally. If it does it sounds like you have wired something incorrectly. I disconected the switch and the wire to E29, now the lights stoped flashing. And I know for sure that my wire was connected to the switch and E29 only. So I dont know why the lights...
by TJAPZ0RRO
Tue Jun 10, 2014 11:55 am
Forum: K-Pro / KManager
Topic: KPRO version
Replies: 2
Views: 2028

Re: KPRO version

Spunkster wrote:What is the serial number on the K-Pro board?
I didn't want to remove the ECU, so I asked my tuner, I have a V3 : )
by TJAPZ0RRO
Tue Jun 10, 2014 8:30 am
Forum: K-Pro / KManager
Topic: KPRO version
Replies: 2
Views: 2028

KPRO version

Hello,

How can I identify which version KPRO I have ?

- TJAP
by TJAPZ0RRO
Tue Jun 03, 2014 5:03 am
Forum: K-Pro Calibrations
Topic: KPRO custom clutch switch in use with e22 ?
Replies: 15
Views: 10417

Re: KPRO custom clutch switch in use with e22 ?

Spunkster wrote:I'm sorry, but I'm not quite understanding your issue.
The EPS and SRS lights flash, the only thing I did was ground the clutch switch and pulled a cable to E29.

This is the first time that they flash.

http://youtu.be/dkjJDHJdqaM
by TJAPZ0RRO
Mon Jun 02, 2014 10:58 am
Forum: K-Pro Calibrations
Topic: KPRO custom clutch switch in use with e22 ?
Replies: 15
Views: 10417

Re: KPRO custom clutch switch in use with e22 ?

The best place for switched 12v is from the empty spots in the under dash fuse box. Ok, going to use that spot in a while, currently I am using E29, because getting ground was the easyst (cel lights up when I press the clutch >.<) But now I am confused, I pinned only to E29 and my EPS icon flashes ...
by TJAPZ0RRO
Sat May 31, 2014 2:46 pm
Forum: K-Pro Calibrations
Topic: KPRO custom clutch switch in use with e22 ?
Replies: 15
Views: 10417

Re: KPRO custom clutch switch in use with e22 ?

Ah ok, I need +12v, what is the best place to get +12v on an EP3 ?

- TJAP
by TJAPZ0RRO
Sat May 31, 2014 3:11 am
Forum: K-Pro Calibrations
Topic: KPRO custom clutch switch in use with e22 ?
Replies: 15
Views: 10417

Re: KPRO custom clutch switch in use with e22 ?

Spunkster wrote:That input has nothing to do with your brake lights. They use a separate switch.
Thanks Spunkster, I'm going to use e22 : )
by TJAPZ0RRO
Fri May 30, 2014 1:13 pm
Forum: K-Pro Calibrations
Topic: KPRO custom clutch switch in use with e22 ?
Replies: 15
Views: 10417

KPRO custom clutch switch in use with e22 ?

If I use e22 for FTS, will my brake lights light up when I press the clutch ?

- TJAP