Search found 12 matches

by GohardOzCu2
Sun Mar 25, 2018 4:10 am
Forum: Accord 2008+ FlashPro
Topic: CU2 Flex Fuel Sensor
Replies: 0
Views: 7146

CU2 Flex Fuel Sensor

Hello to Hondata, just would like to know when this support will be written into our Flash Pro? Without support there is not much point in Super Charging the K24Z3 guys.thanks
by GohardOzCu2
Thu Nov 16, 2017 4:56 am
Forum: FlashPro Calibrations
Topic: Flex Fuel Sensor CU2 Update
Replies: 0
Views: 1340

Flex Fuel Sensor CU2 Update

The latest update has Flex Fuel support for the Civic Si.I assume it is OBD11 and uses a flash pro?We need the update next time to include the CU2. Our ecu has the same spare pin.
by GohardOzCu2
Mon Oct 30, 2017 3:03 am
Forum: TSX 2004-2014
Topic: Engine Response
Replies: 5
Views: 5994

Re: Engine Response

Have submitted the datalog to the US tuner and he couldn't see the low rpm hesitation.worse when cold and still noticeable when fully warmed up.Could fuel delivery 2nd to 3rd gear be off? More load on the motor the worse the problem hot and cold.The US TSX has a huge selection of maps to o select fr...
by GohardOzCu2
Sun Oct 15, 2017 2:43 pm
Forum: TSX 2004-2014
Topic: Engine Response
Replies: 5
Views: 5994

Re: Engine Response

Hey there spunkster, have not taken the car to Toys Garage yet.There is a tune being done over the net by an American tuner at the moment though.The base map from hondata does not improve/change drivability down low either.
by GohardOzCu2
Sat Oct 07, 2017 10:27 pm
Forum: TSX 2004-2014
Topic: Engine Response
Replies: 5
Views: 5994

Engine Response

Have a engine response that is jerky to say the least on my 09tsx between 1500 and 3500rpm.car is smoother the slower you open the thottle.funny thing is the engine sometimes responds better with a trailing throttle while still accelerating??.give it full throttle and it is faultless, goes like it s...
by GohardOzCu2
Thu Jul 13, 2017 2:48 am
Forum: FlashPro Calibrations
Topic: Australian Flashpro Euro Maps
Replies: 3
Views: 1362

Re: Australian Flashpro Euro Maps

Ok then,sounds like a long winded affair.The E15 Euro map would assimilate with E10 Fuel ( 95RON ) here in Australia?
by GohardOzCu2
Tue Jul 11, 2017 11:31 pm
Forum: FlashPro Calibrations
Topic: Australian Flashpro Euro Maps
Replies: 3
Views: 1362

Australian Flashpro Euro Maps

Hi all, just would like feedback on the Euro Ethanol maps.Can i use flex fuel in my CU2 using the Euro E34 map as a starter?
by GohardOzCu2
Sun Jun 11, 2017 6:27 am
Forum: FlashPro Calibrations
Topic: CU2 VTEC ON Datalogging Only
Replies: 1
Views: 934

CU2 VTEC ON Datalogging Only

Hi have a problem with VTEC on the supplied base map with my flashpro.VTEC only works with the flashpro connected and datalogging.
by GohardOzCu2
Mon May 22, 2017 9:26 pm
Forum: FlashPro Calibrations
Topic: CU2 Knock on 3 cylinders
Replies: 0
Views: 1375

CU2 Knock on 3 cylinders

Hi all, have base map from Hondata to suit my car but knock is in the 100's on Cylinder 1- 140 on 2 , 95 on 3 and about 2 on 4??.cheers
by GohardOzCu2
Thu May 11, 2017 7:34 pm
Forum: Applications
Topic: E85 Flex Fuel Sensor
Replies: 4
Views: 2297

Re: E85 Flex Fuel Sensor

That Lamda fuel trim would not let me do multiple trim points then because the ecu does not have a spare pin.Haltech ecu run in parallel to Honda ecu required for a permanent flex fuel set up.
by GohardOzCu2
Thu May 11, 2017 6:45 pm
Forum: Applications
Topic: E85 Flex Fuel Sensor
Replies: 4
Views: 2297

Re: E85 Flex Fuel Sensor

Thanks for the tech, will have to wire sensor into one of the pins on the ecu connector i assume to connect with my Flash Pro?
by GohardOzCu2
Wed May 10, 2017 5:42 pm
Forum: Applications
Topic: E85 Flex Fuel Sensor
Replies: 4
Views: 2297

E85 Flex Fuel Sensor

Hi All, have received my Hondata Flash Pro and now want to run E85 on my 09 Honda Accord Euro M/T ( TSX in the US ) here in Australia. What next please if anyone knows? Thanks.