Ok ill back track the VTEC threshold to 6000rpm.
Yep, think the next step will be to get it dyno tuned.
Search found 21 matches
- Wed May 01, 2019 6:35 am
- Forum: S300 Calibrations
- Topic: H22 newbie calibration
- Replies: 12
- Views: 8884
- Tue Apr 30, 2019 1:01 pm
- Forum: S300 Calibrations
- Topic: H22 newbie calibration
- Replies: 12
- Views: 8884
Re: H22 newbie calibration
Skaterguy1986, WOW that worked a treat. its running so much better. I ran the brown analog- to the thermostat and a 0 offset seems perfect. great advise thanks :) I knocked the vtec down to 4000 from 5000. Had to also disable IAC and ELD (not sure why i have this ELD error) I also tried upload my da...
- Tue Apr 30, 2019 1:59 am
- Forum: S300 Calibrations
- Topic: H22 newbie calibration
- Replies: 12
- Views: 8884
Re: H22 newbie calibration
Thank you for your detailed reply skaterguy1986 :), very much appreciate that I have struggled with resolving the -1.5V offset. the wideband is common to the thermostat housing......... The wideband ground is connected to ECU GND jumper harness which is grounded to the chassis and thermostat housing...
- Mon Apr 29, 2019 11:57 am
- Forum: S300 Calibrations
- Topic: H22 newbie calibration
- Replies: 12
- Views: 8884
- Sat Apr 27, 2019 1:51 am
- Forum: S300 Calibrations
- Topic: H22 newbie calibration
- Replies: 12
- Views: 8884
H22 newbie calibration
I have uploaded my calibration and a couple data logs as the car is not running great.
Does anyone have the time to take a quick look?
Setup:
Stock H22A2
SK2 IM
310 injectors
Lightened Fly Wheel
Does anyone have the time to take a quick look?
Setup:
Stock H22A2
SK2 IM
310 injectors
Lightened Fly Wheel
- Sat Apr 27, 2019 1:39 am
- Forum: s300 / SManager
- Topic: Setting idle speed and max rpm
- Replies: 19
- Views: 6457
Re: Setting idle speed and max rpm
Smanager-Parameters-Rev Limits-speed limiter
Under the above location there is a maximum rprm setting.
I have tried setting the rpm to something like 6000rpm to prove it works but it climbs way past this until i let off throttle
- Sat Apr 27, 2019 1:35 am
- Forum: s300 / SManager
- Topic: Setting idle speed and max rpm
- Replies: 19
- Views: 6457
Re: Setting idle speed and max rpm
Haha that makes sense for the idle issue then - i was under the impression Smanager could still control this idle rpm without the IAC, obviously not with your response.
- Fri Apr 26, 2019 1:10 pm
- Forum: s300 / SManager
- Topic: Setting idle speed and max rpm
- Replies: 19
- Views: 6457
Re: Setting idle speed and max rpm
Its not rev limiting, ive tried setting the rpm to something like 6000rpm to prove it works but it climbs way past this until i let off
- Fri Apr 26, 2019 11:13 am
- Forum: s300 / SManager
- Topic: Setting idle speed and max rpm
- Replies: 19
- Views: 6457
Re: Setting idle speed and max rpm
Hello
Please see my data logs whilst the car was parked.
One is rpm increase and the other i believe is idle.
I have also added the latest calibration iam using.
Im very new to this so help much appreciated
Thanks in advance
Please see my data logs whilst the car was parked.
One is rpm increase and the other i believe is idle.
I have also added the latest calibration iam using.
Im very new to this so help much appreciated
Thanks in advance
- Mon Apr 22, 2019 2:57 pm
- Forum: s300 / SManager
- Topic: Setting idle speed and max rpm
- Replies: 19
- Views: 6457
Re: Setting idle speed and max rpm
Without the calibration and a Datalog showing the issue it is hard to say what might be causing an rev limit. Ok sure. Is anyone available to review my calibration + data log if I uploaded it somehow Secondly I have a voltage offset between between AFR Aem guage and s300. The gnd is good and runnin...
- Mon Apr 22, 2019 2:14 pm
- Forum: s300 / SManager
- Topic: Setting idle speed and max rpm
- Replies: 19
- Views: 6457
Re: Setting idle speed and max rpm
Yes you need the IACV for it to idle properly. Does the absence of IACV stop me from setting the max rpm limit? As this is the problem i am having aswell as setting the minimum idle speed, note both edit settings are found in SManager. Also the car idles well, when warm, idles slightly higher than ...
- Mon Apr 22, 2019 12:51 pm
- Forum: s300 / SManager
- Topic: Setting idle speed and max rpm
- Replies: 19
- Views: 6457
Re: Setting idle speed and max rpm
- Thu Apr 18, 2019 12:23 am
- Forum: s300 / SManager
- Topic: Setting idle speed and max rpm
- Replies: 19
- Views: 6457
Re: Setting idle speed and max rpm
IACV removed due to space issues with SK2 IM and fire wall
- Sun Apr 14, 2019 5:52 am
- Forum: s300 / SManager
- Topic: Setting idle speed and max rpm
- Replies: 19
- Views: 6457
Setting idle speed and max rpm
Can anyone please advise.
-I run s300v3 on my H22 ek, the minimum idle speed and max rpm parameters seem to have no effect when when adjusted in SManager.
Launch limiter RPM works fine when enabled.
-I run s300v3 on my H22 ek, the minimum idle speed and max rpm parameters seem to have no effect when when adjusted in SManager.
Launch limiter RPM works fine when enabled.
- Thu Oct 11, 2018 11:33 am
- Forum: s300 / SManager
- Topic: S300 Fuel and oil pressure
- Replies: 8
- Views: 3915
Re: S300 Fuel and oil pressure
No you do not. I have been trying to run the analogue sensors into the s300 but with no luck. I have tried inputting a 1.5V reference voltage from a small battery. The analogue gnd was connected to the 0v of the 1.5V battery. I have set the conversion to raw data and tried inputting on Analog 0,1 a...