Search found 43 matches

by Awsomsauce
Fri Aug 07, 2020 10:21 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Missing afm hz
Replies: 3
Views: 756

Re: Missing afm hz

Do you have a private email I don’t want to post my tune open to the public.
by Awsomsauce
Fri Aug 07, 2020 8:38 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Missing afm hz
Replies: 3
Views: 756

Missing afm hz

On my Hondata manager for the civic si 2017 and up the tunes are missing the afm hz reading in sensors window. When you open the tunes for civic si 2019 the afm hz is there in the sensors window.

I’m on the most up to date version.
by Awsomsauce
Fri Nov 08, 2019 10:33 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Engine misfire
Replies: 37
Views: 5763

Re: Engine misfire

I’ve been having these issues since I converted to flashpro on my ‘17 si. The misfire codes you posted I got after I changed over to the fx400 clutch kit. Turned off misfire detection and that went away. Lately the issue got worse. I have miss’ under accelerated positive boost while the engine is ne...
by Awsomsauce
Thu Nov 07, 2019 1:40 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: DI flow table
Replies: 1
Views: 442

DI flow table

What is this new table and how is it used for tuning?
by Awsomsauce
Mon Sep 16, 2019 5:41 pm
Forum: s300 / SManager
Topic: Cel light/ limp mode
Replies: 3
Views: 510

Re: Cel light/ limp mode

Good news! I figured out what the cel most likely was. The IACV has a hole in front of the throttle plate causing a high rev idle. Since there’s no coolant to alter whatever witchcraft happens in there it doesn’t read or run right. Resolve; JB Weld to the rescue! Plugged that hole, idle is cherry an...
by Awsomsauce
Mon Sep 16, 2019 3:00 pm
Forum: s300 / SManager
Topic: Cel light/ limp mode
Replies: 3
Views: 510

Re: Cel light/ limp mode

I’d have to take the ecu out of the car, the spark plugs are ngk stock from Autozone
by Awsomsauce
Sun Sep 15, 2019 5:42 pm
Forum: s300 / SManager
Topic: Cel light/ limp mode
Replies: 3
Views: 510

Cel light/ limp mode

I have a p06 board converted to p28, s300 v3, all parts purchased and installed by church. Car recently received an engine swap d15 to d16 vtec. Car is throwing a cel after a few minutes and the jumper on the passenger side kick panel isn’t showing the code when I jump it. (No blinking cel) Also the...
by Awsomsauce
Tue Apr 09, 2019 10:29 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: WOT lambda adj. not saving
Replies: 8
Views: 2200

Re: WOT lambda adj. not saving

I just downloaded today’s update. Thank your for removing the table. It gives me peace of mind knowing it’s not being accessed and changing the fuel tables. I’ll upload the tune tomorrow and run another Datalog.
by Awsomsauce
Tue Apr 09, 2019 10:20 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: WOT lambda adj. not saving
Replies: 8
Views: 2200

Re: WOT lambda adj. not saving

heres one of the datalogs
by Awsomsauce
Tue Apr 09, 2019 9:26 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: WOT lambda adj. not saving
Replies: 8
Views: 2200

Re: WOT lambda adj. not saving

The fuel trims go 3% positive on short trim and typically stay under 2% negative on long trim. The closed loop is set from 14.7 to 11.7. The WOT on the first fuel table is set to 12.0 all around. So as I see it, there should be no reason for my fuel tables to be diving into the 10’s and full load. T...
by Awsomsauce
Tue Apr 09, 2019 9:47 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: WOT lambda adj. not saving
Replies: 8
Views: 2200

Re: WOT lambda adj. not saving

On the top where the injector symbols are I have two tables and am on the most current update. After the ignition one and two I have fuel one and two and the second table is plotted from 12 to 10 afr. If change the table and try to save the change it still will not save it. This photo is from one of...
by Awsomsauce
Mon Apr 08, 2019 6:33 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: WOT lambda adj. not saving
Replies: 8
Views: 2200

Re: WOT lambda adj. not saving

2017 si. Those two in options setting are not checked
by Awsomsauce
Sun Apr 07, 2019 10:36 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: WOT lambda adj. not saving
Replies: 8
Views: 2200

WOT lambda adj. not saving

On the flashpro WOT lambda adjustment there are two tables. Low speed fuel table and high speed fuel table. When you make an adjustment to the low speed the table and save it stays. The high speed fuel table does not. At the Hondata event I had a suspicion that my car wasn’t running right and confir...
by Awsomsauce
Sat Jan 26, 2019 5:58 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Wastegate tuning
Replies: 3
Views: 1385

Re: Wastegate tuning

I don’t have the datalog anymore and the tune is a custom one that I would like to keep private. So is there a way to adjust the wastegate actuation? The turbo is small enough to be at full boost by the end of second gear, not hitting 19-20 psi on a 25 psi command. Top of second gear is near 60 mph....
by Awsomsauce
Fri Jan 25, 2019 7:24 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Wastegate tuning
Replies: 3
Views: 1385

Wastegate tuning

Like the electronic throttle is there any way to adjust the wastegate actuation. It seems like no matter what I dial the boost to the waste gate only allows boost to build to a certain point on WOT per gear. Is there any way to change the factory setting of the waste gate actuation?