Search found 15 matches

by thomasn
Tue Oct 22, 2019 9:15 am
Forum: K-Pro / KManager
Topic: Updated CAN Protocol for AIM MXS (with all analogs and Lambda)
Replies: 8
Views: 133

Re: Updated CAN Protocol for AIM MXS (with all analogs and Lambda)

Is it possible to include "Mil status" in the protocols ?

that would be great since i have only a CAN interface between the dashboard and kpro board
by thomasn
Tue Oct 22, 2019 9:13 am
Forum: K-Pro / KManager
Topic: Updated CAN Protocol for AIM MXS (with all analogs and Lambda)
Replies: 8
Views: 133

Re: Updated CAN Protocol for AIM MXS (with all analogs and Lambda)

I use approximations over a specific range that i choose, no Steinhart-Hart. Ethanol/Fuel temp is already included in your Motec SDL/ADL protocol that i used (i wanted the 8 analog inputs, and the AIM can protocol has only 4 analogs inputs), but not included in the AIM reading protocol i developed t...
by thomasn
Wed Oct 09, 2019 3:30 am
Forum: K-Pro / KManager
Topic: Updated CAN Protocol for AIM MXS (with all analogs and Lambda)
Replies: 8
Views: 133

Re: Updated CAN Protocol for AIM MXS (with all analogs and Lambda)

Also, i got some questions about the fact that the Ethanol content and Fuel temperature is not included in my protocol : i can add them but i may ask a little contribution on the time spent for this, and if you want more help on how to install other custom sensors if you're not able to calculate the...
by thomasn
Wed Oct 09, 2019 3:24 am
Forum: K-Pro / KManager
Topic: Updated CAN Protocol for AIM MXS (with all analogs and Lambda)
Replies: 8
Views: 133

Re: Updated CAN Protocol for AIM MXS (with all analogs and Lambda)

Another example with the AEM 30-2012 sensor :
Screenshot 2019-10-09 at 12.23.05.png
Screenshot 2019-10-09 at 12.23.05.png (150.16 KiB) Viewed 113 times
aem302012.PNG
aem302012.PNG (30.45 KiB) Viewed 113 times
by thomasn
Wed Oct 09, 2019 3:21 am
Forum: K-Pro / KManager
Topic: Updated CAN Protocol for AIM MXS (with all analogs and Lambda)
Replies: 8
Views: 133

Re: Updated CAN Protocol for AIM MXS (with all analogs and Lambda)

Example of adding a custom temperature sensor on a Kpro, how to wire it, how to create the Kpro custom input, and the math channel for the AIM : 1) EGT sensor : EGT sensors are for most of them k-type sensors, that requires amplifications to be read. I choose to use a RTD sensor supplied by AEM (AEM...
by thomasn
Tue Oct 08, 2019 10:10 am
Forum: K-Pro / KManager
Topic: Updated CAN Protocol for AIM MXS (with all analogs and Lambda)
Replies: 8
Views: 133

Re: Updated CAN Protocol for AIM MXS (with all analogs and Lambda)

Example of display with this protocol :
IMG_1679.PNG
IMG_1679.PNG (3.24 MiB) Viewed 131 times
by thomasn
Tue Oct 08, 2019 10:04 am
Forum: K-Pro / KManager
Topic: Updated CAN Protocol for AIM MXS (with all analogs and Lambda)
Replies: 8
Views: 133

Updated CAN Protocol for AIM MXS (with all analogs and Lambda)

Hi, since i got lot of PM/emails asking for my custom AIM MXS CAN protocol for the KPRO V4, here is my version and documentation : The Kpro can protocol included in the AIM library has some limitations : - only 2 analog inputs returned, for specific sensors (not documented) - no lambda value returne...
by thomasn
Tue Oct 01, 2019 11:31 am
Forum: K-Pro / KManager
Topic: AIM MXS Strada and Kpro Oil Pressure
Replies: 12
Views: 1412

Re: AIM MXS Strada and Kpro Oil Pressure

Sorry i was not informed of the private message via email,
i'm sending a PM to all who asked so you can send me an email and i can send the can protocol with the setup i'm using
by thomasn
Sun Jun 02, 2019 8:53 am
Forum: K-Pro / KManager
Topic: VTC issues code P0010
Replies: 14
Views: 655

Re: VTC issues code P0010

Had the same on my engine, the intake cam was physically fixed to 0° because the previous ECU managing the engine was not VTC ready (and intake cam was 20° off on the timing chain to simulate VTC so i had another code also).

So check under the pulley / inspect the mecanism ?
by thomasn
Wed May 29, 2019 11:34 am
Forum: K-Pro / KManager
Topic: AIM MXS Strada and Kpro Oil Pressure
Replies: 12
Views: 1412

Re: AIM MXS Strada and Kpro Oil Pressure

I developed a custom kpro can protocol for the AIM MXS Strada (non strada also). I added the Lambda reading since AIM decided to ignore this stream in the protocol. The 8 analog inputs are returned as raw mv values, and i added my calculations using Math channels for my custom sensors (fuel pressure...
by thomasn
Thu Mar 07, 2019 6:22 am
Forum: K-Pro / KManager
Topic: Fuel/Ignition compensation for AIT and ECT
Replies: 1
Views: 635

Fuel/Ignition compensation for AIT and ECT

Hi, lets say i have compensation for fuel and ignition for AIT, and the highest cell is 175°F. What happens at 200°F ? Interpolation from the 175°F value (so ~1.15x more), or it takes the 175°F value because it's the maximum ? The Kmanager documentation does not explain this (or maybe i did not noti...
by thomasn
Thu Jan 03, 2019 11:54 am
Forum: K-Pro / KManager
Topic: ECU grounding with insulated ECU casing
Replies: 2
Views: 350

Re: ECU grounding with insulated ECU casing

Oh ok, i was thinking the ECU needed to be grounded

Thanks
by thomasn
Wed Jan 02, 2019 7:09 am
Forum: K-Pro / KManager
Topic: ECU grounding with insulated ECU casing
Replies: 2
Views: 350

ECU grounding with insulated ECU casing

Hi, i'm running a K-Pro in an Ariel Atom, with rigid engine mounts : so i need to insulate the ECU case from the chassis with silent blocks to prevent it from breaking due to vibrations. I'll bolt a ground wire from the chassis to one of the ECU cover bolts, but i'm wondering if this ground wire has...
by thomasn
Thu Aug 30, 2018 12:24 pm
Forum: Applications
Topic: PRC Ecu - how to identify pre-facelift or facelift ?
Replies: 2
Views: 1250

Re: PRC Ecu - how to identify pre-facelift or facelift ?

Thanks for your help Spunkster :)

Have a good day
by thomasn
Thu Aug 30, 2018 1:41 am
Forum: Applications
Topic: PRC Ecu - how to identify pre-facelift or facelift ?
Replies: 2
Views: 1250

PRC Ecu - how to identify pre-facelift or facelift ?

Hi, i bought a used PRC ecu, to install a Kpro V4 and drive a K20a engine in an Ariel Atom. The company i send the stock ecu to, is asking if the ECU comes from a pre-facelift DC5 or facelift DC5. I don't know, and the seller of the ECU does not know :( So, the serial number is : 37820-PRC-013 2070-...