Search found 8 matches

by Kr4nG
Fri Apr 12, 2019 1:15 pm
Forum: K-Pro / KManager
Topic: Dropping Alternator Charge Voltage - ELD Enable/Disable
Replies: 26
Views: 32624

Re: Dropping Alternator Charge Voltage - ELD Enable/Disable

Regardless of what harness I am using. Is the wire from (c101pin 8 ATLT-L) be connected to (B 10 ATLT-L) Yes or No.
by Kr4nG
Wed Mar 06, 2019 4:29 pm
Forum: K-Pro / KManager
Topic: Dropping Alternator Charge Voltage - ELD Enable/Disable
Replies: 26
Views: 32624

Re: Dropping Alternator Charge Voltage - ELD Enable/Disable

anyone? to my question above
by Kr4nG
Wed Jan 23, 2019 10:37 am
Forum: K-Pro / KManager
Topic: CanBus reading
Replies: 5
Views: 546

Re: CanBus reading

Can the output of the can message id's be changed? I have a swapped 06 mini cooper k24 kpro4 and wanted to know if I could get my cluster to display the RPM. The cluster has can - and can + wires but I think the message ID for the RPM is 0x316 Byte 3. Any way to modify it?
by Kr4nG
Sun Jan 13, 2019 3:43 pm
Forum: K-Pro / KManager
Topic: Dropping Alternator Charge Voltage - ELD Enable/Disable
Replies: 26
Views: 32624

Re: Dropping Alternator Charge Voltage - ELD Enable/Disable

So are we suppose to tap the wire from c101pin 8 ATLT-L into B 10 ATLT-L in order to get our charge light to work? Because c101 pin 8 goes to nothing on my swap and I'm trying to figure out how to get my charge light to work.
by Kr4nG
Sat Sep 29, 2018 1:30 pm
Forum: K-Pro / KManager
Topic: MPH Smoothing
Replies: 1
Views: 340

MPH Smoothing

Can anyone assist on explaining what the smoothing under alternate speed input means. I have it set to 5 and Im not sure what it does. Been trying to change it 20 then 5 then 10 and I just cant seem to find any difference.
by Kr4nG
Wed Sep 19, 2018 10:30 am
Forum: K-Pro / KManager
Topic: PND K-Pro Reverse Lockout HELP!
Replies: 4
Views: 742

Re: PND K-Pro Reverse Lockout HELP!

Works like OEM. Confirmed. Thank you so much.
by Kr4nG
Tue Sep 18, 2018 5:11 am
Forum: K-Pro / KManager
Topic: PND K-Pro Reverse Lockout HELP!
Replies: 4
Views: 742

Re: PND K-Pro Reverse Lockout HELP!

Thank you. I will plug it in now. Do you happen to know when the solenoid gets triggered? Does it get triggered via RPM, Speed, or Load?
by Kr4nG
Sat Sep 15, 2018 9:27 pm
Forum: K-Pro / KManager
Topic: PND K-Pro Reverse Lockout HELP!
Replies: 4
Views: 742

PND K-Pro Reverse Lockout HELP!

I have been searching for days on how to install the reverse lockout and I have one question. Do I need a relay? So im using 02-04 type s harness with PND Kpro. According to hondata you can activate the reverse lockout with pin B22 (secondary intake runner) by using a PND (type s) calibration. I hav...