Hello,
i cant find the issue. You say i have a grounding problem. But how can i fix it? Can i put more ground wires from the engine to the chassis to fix it?
Im starting to fed up with kpro, never had those issues with the link g4x :(
Search found 21 matches
- Wed Sep 14, 2022 4:49 am
- Forum: K-Pro / KManager
- Topic: Analogue Sensor jitter/jumping after car warming up
- Replies: 10
- Views: 923
- Mon Jul 11, 2022 2:25 am
- Forum: K-Pro / KManager
- Topic: Analogue Sensor jitter/jumping after car warming up
- Replies: 10
- Views: 923
Re: Analogue Sensor jitter/jumping after car warming up
Hey no. I tried to wire it differently and completele seperate from ignition loom and stuff and tried the different grounding on the ecu but it didnt changed a thing.. I dont know where the Ground issues are. Its a fulkly build race car with stripped wireloom, welded cage and stuff. Its not possible...
- Mon Jul 11, 2022 2:22 am
- Forum: K-Pro / KManager
- Topic: rotational idle possible?
- Replies: 0
- Views: 4186
rotational idle possible?
Hi,
is it possible to have rotational idle? Best would be to active it via a switch.
Background: I am building a rally car with a k20 and toda a3 cams. I want some rough idle for when on the podium ;)
is it possible to have rotational idle? Best would be to active it via a switch.
Background: I am building a rally car with a k20 and toda a3 cams. I want some rough idle for when on the podium ;)
- Sat Apr 02, 2022 12:26 pm
- Forum: K-Pro / KManager
- Topic: Analogue Sensor jitter/jumping after car warming up
- Replies: 10
- Views: 923
Re: Analogue Sensor jitter/jumping after car warming up
How can I improve the ground? Should I run more wires from the cylinder head to the chassis?
- Fri Apr 01, 2022 2:36 pm
- Forum: K-Pro / KManager
- Topic: Analogue Sensor jitter/jumping after car warming up
- Replies: 10
- Views: 923
Re: Analogue Sensor jitter/jumping after car warming up
no i mean how to check what could cause the voltage jitter.
Thanks
Thanks
- Fri Apr 01, 2022 11:32 am
- Forum: K-Pro / KManager
- Topic: Analogue Sensor jitter/jumping after car warming up
- Replies: 10
- Views: 923
- Fri Apr 01, 2022 5:05 am
- Forum: K-Pro / KManager
- Topic: Analogue Sensor jitter/jumping after car warming up
- Replies: 10
- Views: 923
Analogue Sensor jitter/jumping after car warming up
Hi, i have strange thing with my Sensors. Im using two Bosh Temp/Pressure sensor. One for fuel pressure and one for Oil Pressure / Oil Temp. While mapping, i noticed the Fuel Pressure was jumping between 2,6bar and 4,2bar. I changed the whole puel pump assembly inc. the pump and it didnt changed a t...
- Tue Mar 15, 2022 1:00 pm
- Forum: K-Pro Calibrations
- Topic: VTC Cam Angle Not Always Hitting Target
- Replies: 9
- Views: 932
Re: VTC Cam Angle Not Always Hitting Target
Jdm DC5 does indeed has a oil pressure sensor. You can leave that enabled if you don’t remove it.
- Sat Feb 26, 2022 3:04 am
- Forum: K-Pro / KManager
- Topic: understanding injector setup page
- Replies: 21
- Views: 2308
Re: understanding injector setup page
Hi, i agree with garz. Its confusing. So just to confirm: I am running a car on the stock 310cc inj with a fuelmap. Now i switch the 310cc with 440cc. I dial that that in in the "inj size" tab. What do i need to do now to basically get the car started? It seems that the car is now VERY ric...
- Mon Feb 07, 2022 5:08 am
- Forum: K-Pro / KManager
- Topic: Integra DC5-R rebuild wont start / USB cant connect
- Replies: 2
- Views: 487
Re: Integra DC5-R rebuild wont start / USB cant connect
Hello,
after countless hours of diagnostics i found the issue: I had the wrong Throttlebody Gasket which had a channel from the iavc to after the butterfly. I dont have the iavc connected so i assume it is just plain open without wires. And because of that it would wouldnt start.
after countless hours of diagnostics i found the issue: I had the wrong Throttlebody Gasket which had a channel from the iavc to after the butterfly. I dont have the iavc connected so i assume it is just plain open without wires. And because of that it would wouldnt start.
- Sat Jan 15, 2022 6:01 am
- Forum: K-Pro / KManager
- Topic: Integra DC5-R rebuild wont start / USB cant connect
- Replies: 2
- Views: 487
Integra DC5-R rebuild wont start / USB cant connect
Hi, im having issues with my ecu/car. Im building my dc5 as a racecar. I removed everything from it and got a cage welded in. Last year the car was running fine with a kpro i borrowed from a friend. No issues. Now i rebuilded it and got a kpro4 a few weeks ago (send in my PRC ECU so the kpro is new)...
- Wed Jan 12, 2022 2:53 am
- Forum: K-Pro / KManager
- Topic: Analog Oiltemp Sensor - no curvation
- Replies: 8
- Views: 828
Re: Analog Oiltemp Sensor - no curvation
That was a very helpful thread.
Thank you very much. Glad i bought the kpro :)
Thank you very much. Glad i bought the kpro :)
- Fri Dec 31, 2021 3:21 am
- Forum: K-Pro / KManager
- Topic: Analog Oiltemp Sensor - no curvation
- Replies: 8
- Views: 828
Re: Analog Oiltemp Sensor - no curvation
okay then i should be good to go.
Can you tell me which pullup i should use? 1,5k ohm as said in the hondata manual or 4,7k ohm as said at bosch?
Thanks for clarification
Can you tell me which pullup i should use? 1,5k ohm as said in the hondata manual or 4,7k ohm as said at bosch?
Thanks for clarification
- Wed Dec 29, 2021 2:53 am
- Forum: K-Pro / KManager
- Topic: Analog Oiltemp Sensor - no curvation
- Replies: 8
- Views: 828
Re: Analog Oiltemp Sensor - no curvation
Hey, i looked the Bosch CLT and the one i have up. The resistant is pretty close. I guess it will work. But how can i verify it? It would be literally quite bad if the ECU thinks the oil is 130°C while in reality its more like 150°C. Id like to see more sensors in the kmanager. The Bosch 0261230340 ...
- Tue Dec 21, 2021 3:27 pm
- Forum: K-Pro / KManager
- Topic: Analog Oiltemp Sensor - no curvation
- Replies: 8
- Views: 828
Re: Analog Oiltemp Sensor - no curvation
Hi, thanks for the answer. The sensor is that one: bosch 0261230340 I can do the Steinhart equation but i do need 3 points to set. In the krpo analog under custom, i can only set 2 values. Also the curvation changes when you have a different resistor. In the Hondata manual it says 1.1kohm is recomme...