Hondata

Yes and it still didn’t work.

Hey Spunkster, I actually called today and got another guy at tech support there. He actually made me remember that I got an ODBII Scanner port wired into my harness by wire-worx!! I hooked it up to my WIFI scanner tool and connected to OBD Fusion and it was correctly reading the Engine Coolant Temp...

We also tried that last night and swapped it into a different working ECU that had a KPro3 in it. It still didn’t work. I personally don’t own another ECU. They aren’t exactly cheap or easy to come by. The guy that let me test on his car had a spare for another friends car. We tried to exhaust all p...

Hey Spunkster, I hope all is well. I got lucky and found a local guy that was willing to let me test out my hondata on his working car. We first turned his car and let it reach operating temp and we were able to see it changing actively in the data logger. We plugged in my ECU started it back up and...

Here's a video of what I'm experiencing sorry its 6 minutes long but I wanted to let the car heat up so you could see what I was talking about. Thanks again for the help.

I'm confused. I thought Hondata could control the radiator fan using the ECT located on the head? That information is all over the place that you don't actually have to run a fan switch in the radiator to control the fans because hondata kpro can handle it. If I'm not being clearly I'm doing two com...

Also I know you didn't see it budge in the data log. But if I run the car for several minutes until the temp gauge on my car climbs pretty high up, turn off the car and turn the car back on the ECT value will be around 190F and I'll get an error code for coolant boiling or w/e it actually is. So the...

So if I plugged it into a new sensor that I had sitting in the fridge it shouldn’t increase in temp? It’s not screwed into the coolant passage way just dangling loose. Out in the heat it never climbs in temp. But if I turn the car off and then back on and reconnect the temp will read higher like you...

Hey Spunkster, Thanks for responding. I've posted my current calibration and a datalog file of the ECT value never changing. It updated right at the start but never updated. I let the car run for several minutes until the needle on the temp gauge got about halfway up. Serial #: 05008338 Software Ver...

I have a KPro V2 on a PRB ECU running with my K24a2 swapped into 97 civic. All of my other sensors update constantly in KManager when I'm in the live view and the car is started except for the ECT sensor. The ECT sensor will update to the correct value when the car is started and the I start the liv...