Hondata

I used version 3.5.8 and I uploaded factory settings calibration, NOT return to stock

Car seems ok. I suppose if VTEC is really always OFF I'd feel the car not pushing at high revs.

Hi
I downloaded first calibration to test the car. I took from Flashpro base calibration FK2 Europe with factory settings and I saw VTS always off in first datalog.
Is it a channel address problem or a real VTEC issue? The car seems ok driving it and no DTC
Thanks for your patience

Thanks, Doug! ;)

Hi, is Hondata fuel kit for FK8 compatible with a FK2? I suppose not cause I can't see options in Flashpro FK2 calibrations In this case how can I max out FK2 power with stock internals? I already have full race dp and 3" exhaust, use 100RON fuel Could an IC help? Or the HPFP limits everithing?...

Hi Doug,
I'd like to know if it's possible to implement math (virtual) channels in S300 datalogging.
To start with simple algebraic and boolean operators.
Thanks for all.

Luca Mondello

Great work Doug,
I'll try it next week cause I've a customer's car with this problem.

I think Doug and his team are great professionists. Minor problems on each new feature release are normal cause the variety of configurations which the new software must be installed on. I don't think it's right to accuse them for betatesting with customers: consider that new features are FREE and, ...

I'm using 1.2.1.2 and during a road mapping of an European CTR, I noticed that for revs over 7000 it goes very very lean. I tried to give more fuel but nothing: the wideband shows over 20:1. I tried an old map for a similar setup and it goes ok....I tried to copy maps to a new project but it goes le...

Now I tried to reuse original P73 and the strange noise, coming out from CANISTER system, went away.
With modded P72A, it's present at low TPS and it's terribly loud.
Tonight I'll try to cut J1.

I'll try.....thanks.

The ECU is a USA P72A with daughter-board inside....took from a GSR Integra. The knock sensor is enabled but the value in SENSORS window is always 0.00. About oxygen sensor: I mapped the car with an EXTERNAL LSU4.2; the car is perfecly mapped in open loop; now I reinstalled the original narrowband a...

I've some questions about the setup I used yesterday. We had an european DC2 ('97) with P72A (USDM), Hondata harness and S300. No problems about mapping. Only problems with some parameters: - We can't read knock sensor voltage (always 0.00V) - We can't go in closed loop without error 41 (O2 sensor h...

Now it works.......thanks Doug.

This is one with the problem....I've over ten of these....newer calibrations are not affected.

I've the same problem opening old calibrations with 1.2.1.0.
I use WinXP Pro SP2 and KManager downloaded from the website.

I reinstalled 1.2.0.9 and it's fixed.