Search found 8 matches

by BH_Turbo
Mon Nov 28, 2005 3:23 pm
Forum: s300 / SManager
Topic: Help! Need a basemap!
Replies: 4
Views: 3392

Do you have a wideband? Do you have anyone that has one that you can borrow for a few hours? I'm a noob and can say that without a wideband you won't know what your running. Someone with the exact same setup may be miles off of what you need. You may want to do as I did and park the car, try and get...
by BH_Turbo
Sat Nov 26, 2005 10:32 pm
Forum: s300 / SManager
Topic: D-series help!
Replies: 7
Views: 5470

Update on the untuneable d16y8! After playing with the fuel trim so the car would run and make it to mobile, my tuner found the problem. Seems my GM 3bar map sensor was doa new out of the box. With it geeked out, hondata was seeing 41lbs of boost at idle. I'm sure if it ever sees 41lbs of boost its ...
by BH_Turbo
Wed Nov 23, 2005 8:11 pm
Forum: s300 / SManager
Topic: D-series help!
Replies: 7
Views: 5470

Here is the second map and data log that actually ran for a minute or so.

I also got a map sensor code on atleast one of these, I'm going to put a multi-meter on the GM 3bar map sensor that I'm running tomorrow to insure that I am getting the correct voltage.
by BH_Turbo
Wed Nov 23, 2005 8:07 pm
Forum: s300 / SManager
Topic: D-series help!
Replies: 7
Views: 5470

Ok, here is the latest. I had three maps sent by my tuner, none would crank. I used the smracing map and it cranked up and ran till operating temp. I went back through my tuners maps and one of those cranked for a short time. I did data log both of them and to keep any confusion down I'm going to po...
by BH_Turbo
Wed Nov 23, 2005 1:38 pm
Forum: s300 / SManager
Topic: D-series help!
Replies: 7
Views: 5470

Thank you for the reply, I can't wait to get home and give it a whirl. I will be sure to post back the results I get.
Thanks again,
David
by BH_Turbo
Wed Nov 23, 2005 6:31 am
Forum: s300 / SManager
Topic: D-series help!
Replies: 7
Views: 5470

D-series help!

Last night, late last night we finished getting everything installed and the base map uploaded that my tuner gave me so that I could drive to mobile so we could get it on the dyno and tune it. It cranked right up, rough idle but it cranked and ran. While it was idling we were putting up tools so I c...
by BH_Turbo
Mon Nov 07, 2005 7:24 am
Forum: s300 / SManager
Topic: 98 Civic D16y8
Replies: 4
Views: 7607

Thanks for the reply! The link you provided was awesome, hats off to the creator! I'm a network engineer by trade, not an electrical engineer without a doubt. I don't think this is the project for me to learn on nor do I have the correct tools. My tuner says that he can deal with it no problem and I...
by BH_Turbo
Tue Nov 01, 2005 7:59 am
Forum: s300 / SManager
Topic: 98 Civic D16y8
Replies: 4
Views: 7607

98 Civic D16y8

Hello, Being new to the forum and Hondata I wanted to say hello. I am running a 98 Civic, D16Y8, stock internals, Turbonetics T3, map bypass and a FMU. Needless to say, FMU's suck so my turbo install has never been complete and for some reason I think my map bypass is screwed since for the last week...