Search found 15 matches

by Civicboi_fk2
Sun Nov 10, 2019 12:54 pm
Forum: Civic Type R 2015+
Topic: R Mode throttle response in Comfort
Replies: 1
Views: 146

R Mode throttle response in Comfort

Hi Hondata,

Civic FK2

If i copy the R Mode throttle response tables (from every gear) and paste it into the comfort tables will this create the R Mode throttle response in comfort mode?
by Civicboi_fk2
Tue Jul 16, 2019 3:21 pm
Forum: FlashPro Manager
Topic: FlashProManager 3.4.1
Replies: 10
Views: 1100

Re: FlashProManager 3.4.1

Hondata wrote:
Tue Jul 16, 2019 7:56 am
No I believe that the P2263 you see is a symptom not the cause.
So is the cause the calibration requesting more torque than can delivered or potentially a boost leak. Do we know why a re-load of the calibration is the only way to reset the issue
by Civicboi_fk2
Tue Jul 16, 2019 3:36 am
Forum: FlashPro Manager
Topic: Ecu
Replies: 2
Views: 374

Re: Ecu

Hi i bought a flash Pro about six months ago. I could not Lock it to my vehicle after a few emails and updates and a long wait finally I got it to Lock to my vehicle when I went to do first calibration it started to download and then told me to turn off the ignition I did that and nothing happened ...
by Civicboi_fk2
Tue Jul 16, 2019 3:34 am
Forum: FlashPro Manager
Topic: FlashProManager 3.4.1
Replies: 10
Views: 1100

Re: FlashProManager 3.4.1

Hondata wrote:
Sat Jul 13, 2019 1:03 pm
Typically when the torque tables have been changed so that the turbo can not meet the torque request.
Could this be a trigger for the 4K rev limiter issues that has been seen lately? that requires the Calibration to be re-loaded to clear?
by Civicboi_fk2
Fri Jul 12, 2019 2:36 pm
Forum: FlashPro Manager
Topic: FlashProManager 3.4.1
Replies: 10
Views: 1100

Re: FlashProManager 3.4.1

Hi Hondata,

What would be the need for P2263 disable? What scenarios would generate a P2263 code?
by Civicboi_fk2
Tue Jul 09, 2019 10:25 am
Forum: Civic Type R 2015+
Topic: FK2 Flashpro unreadable error causing 4k rev limit
Replies: 13
Views: 1306

Re: FK2 Flashpro unreadable error causing 4k rev limit

Hi all, Im currently experiencing the same 4K rev limit since a Hondata retune. After evaluating a few datalogs the only difference i notice is that on every datalog where i have the problem i have no ABS sensor speed readings whereas when i do not have the fault they are reading correctly. i notice...
by Civicboi_fk2
Thu Jun 13, 2019 6:49 am
Forum: Civic Type R 2015+
Topic: Fuel pressure CMD too high?
Replies: 8
Views: 902

Re: Fuel pressure CMD too high?

So the problem is still here.

Was ok yesterday on a test run, tried today and it is back to fault conditions. Trying the technique I used yesterday hasn't worked.

Do you think the best option is to revert back to OEM and see if the problem persists?
by Civicboi_fk2
Thu Jun 13, 2019 2:01 am
Forum: Civic Type R 2015+
Topic: Fuel pressure CMD too high?
Replies: 8
Views: 902

Re: Fuel pressure CMD too high?

Return to stock, see if the problem persists. Post the calibration. This was my preferred option however I have a custom calibration which I don't have a copy of to upload. However, I fully disabled VSA as per the Hondata notes (+R and hold VSA 10 seconds) and the car seems ok again, revving fine, ...
by Civicboi_fk2
Wed Jun 12, 2019 5:53 am
Forum: Civic Type R 2015+
Topic: Fuel pressure CMD too high?
Replies: 8
Views: 902

Re: Fuel pressure CMD too high?

Hi,

Done another run today, I believe the car is in some sort of limp mode, the car won't rev over 4000rpm in any condition.

There are no engine management codes.

I have attached the new data log

Image
by Civicboi_fk2
Tue Jun 11, 2019 12:44 pm
Forum: Civic Type R 2015+
Topic: Fuel pressure CMD too high?
Replies: 8
Views: 902

Re: Fuel pressure CMD too high?

I think the problem is the other way around. The throttle closes and then the fuel pump PID control overshoots because of the sudden reduction in fuel flow. Can you update to the latest version and then send a datalog where you don't release the throttle as quickly? Hi, I have just updated the soft...
by Civicboi_fk2
Tue Jun 11, 2019 6:46 am
Forum: Civic Type R 2015+
Topic: Confirm that ECU is Jail-broken
Replies: 5
Views: 2620

Re: Confirm that ECU is Jail-broken

Hondata wrote:
Tue May 07, 2019 11:07 am
Return the ECU to stock.
Hi Hondata, Just for the closure of this thread, returning the ECU back to stock resolved the problem. Many thanks for your help.
by Civicboi_fk2
Tue Jun 11, 2019 6:39 am
Forum: Civic Type R 2015+
Topic: Fuel pressure CMD too high?
Replies: 8
Views: 902

Fuel pressure CMD too high?

Hi Hondata, I am currently having problems with what feels like boost cut whilst driving. Having investigated the Datalog all I can see which happens on every occasion is that the Fuel Pressure Command goes above 2900PSI and when it does the problem is present. I have attached a datalog of a 5th gea...
by Civicboi_fk2
Mon May 06, 2019 1:38 pm
Forum: Civic Type R 2015+
Topic: Confirm that ECU is Jail-broken
Replies: 5
Views: 2620

Re: Confirm that ECU is Jail-broken

Hi Hondata again, I tried uploading the stock calibration and failed due to the ECU not being jail-broken which confirms my original question. However when it has failed it has put the ECU in recovery mode. In the help files it says to re-upload the calibration however i cant due to the ECU not bein...
by Civicboi_fk2
Mon May 06, 2019 10:06 am
Forum: Civic Type R 2015+
Topic: Confirm that ECU is Jail-broken
Replies: 5
Views: 2620

Re: Confirm that ECU is Jail-broken

You can try to use the FlashPro and if it does not work then it must be jailbroken. Thank you for your reply. I can datalog with the Flash Pro is this enough to confirm? or should i try to upload a calibration. I am unsure of the calibration is on the ECU but do not want to loose it until i have a ...
by Civicboi_fk2
Mon May 06, 2019 8:50 am
Forum: Civic Type R 2015+
Topic: Confirm that ECU is Jail-broken
Replies: 5
Views: 2620

Confirm that ECU is Jail-broken

Hi Hondata,

My car is currently tuned (non-Hondata), i have since bought a flash-pro to enable my car to be tuned with Hondata.

Is there an easy way to ensure that my ECU is Jail-broken / ready to take a Hondata tune.

Car is a 2015 FK2

Regards
David