Search found 17 matches

by gcapraz
Tue Sep 08, 2020 12:58 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: 2016 International Civic 1.5T Knock Sensitivity Table
Replies: 2
Views: 65

Re: 2016 International Civic 1.5T Knock Sensitivity Table

dear arnold,
some ecu has that table and some ecu doesnt have. i guess it depends on the ecu capability.

by the way you should be carefull with knock sensitivity tables. if you make very much desensitive, you can run with lots of knock without knowing it.
by gcapraz
Wed Aug 12, 2020 11:22 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Torque Table Limit Vs Dyno CVT Correlation
Replies: 19
Views: 1244

Re: Torque Table Limit Vs Dyno CVT Correlation

Hi Ryan, Its good to make a comparison but you need to see at the similar same rpm datalogs. because turbo can create different torque in different rpm. pls check it again. Hey gcapraz, this is as close as I can get in RPM. I've added IGN as well, also note the ECT and IAT are very close, that is i...
by gcapraz
Wed Aug 12, 2020 2:20 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Torque Table Limit Vs Dyno CVT Correlation
Replies: 19
Views: 1244

Re: Torque Table Limit Vs Dyno CVT Correlation

Hi Ryan, pls for make sure the torque limiting table work with in this way. set all limits to 180 nm. then make 1 run in any gear for example 3. gear from 2000 rpm to the end. you will see the map pressure is changing but not reach to the target even your target pressure is so high. torque control ...
by gcapraz
Fri Aug 07, 2020 1:47 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Torque Table Limit Vs Dyno CVT Correlation
Replies: 19
Views: 1244

Re: Torque Table Limit Vs Dyno CVT Correlation

Hi arnoldod! Thanks, your dyno vs torque table settings would then tell us that the torque table really isn't limiting anything. (Especially if the screenshot of the torque table you have set above with a max 250nm was used for each of the dyno runs above). I would like confirmation from @Hondata h...
by gcapraz
Mon Feb 17, 2020 2:59 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Meth injection systems.
Replies: 0
Views: 2774

Meth injection systems.

Dear all,

Does any one who use methanol injections?
Do you have some advise who want to use it?

Is it important for see iat2 sensors value for ecu?
by gcapraz
Thu Feb 13, 2020 1:47 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: TSP Stage 1 Canned Tune for Flashpro - Please advise if The Tune is Safe?
Replies: 9
Views: 1821

Re: TSP Stage 1 Canned Tune for Flashpro - Please advise if The Tune is Safe?

dear arnold, Does your honda have cvt cooler? pls check your driver side around tire ares. if you have factory cvt cooler, do not worry about torque limitation that hondata said. and open a hole in front bumper same as horn side holes. if you dont have cvt cooler, stay 250nm torque limitation. you ...
by gcapraz
Tue Feb 11, 2020 1:06 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: TSP Stage 1 Canned Tune for Flashpro - Please advise if The Tune is Safe?
Replies: 9
Views: 1821

Re: TSP Stage 1 Canned Tune for Flashpro - Please advise if The Tune is Safe?

Hi Arnaldo, Back where we started, haha. How come you went with a tune from TSP? We had your fueling pretty close to dialed before on the Hondata basemap you had. Can you post the calibration you received from TSP or send it to me in a PM so I can look it over in conjunction with your datalog? I do...
by gcapraz
Mon Feb 10, 2020 4:02 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: TSP Stage 1 Canned Tune for Flashpro - Please advise if The Tune is Safe?
Replies: 9
Views: 1821

Re: TSP Stage 1 Canned Tune for Flashpro - Please advise if The Tune is Safe?

dear arnold, i checked your datalog and it looks fine. dont worry about psi pressure. i m boosting 25 psi with my non-si civic for 20.000km. but there is one thing that you need to set it which is maf scale setting. easily from v4 to v5 you can adjust %5 up and datalog it again see afr cmd and real ...
by gcapraz
Wed Jan 22, 2020 1:34 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: About relationship between knock control value & knock ignition limit table
Replies: 4
Views: 3047

About relationship between knock control value & knock ignition limit table

Dear Hondata and spunkster and all users, I would like to know relationship between knock control value and knock ignition limit table. For my car i m try to do custum tune and i got some issues. around 5500 rpm knock value increase so quickly. top i saw 0.80 and there time car cut down the power. i...
by gcapraz
Thu Dec 19, 2019 2:00 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Fuel Economy
Replies: 12
Views: 8379

Re: Fuel Economy

I have a new solution for fuel economy.

should thick to use map to determine wot and rewrite on wot table.

My table is
1-2-3 coloums have 14.7
4 13.7
5 12.7
7-8-9-10 11.7

With this table i figure it out good fuel economy.
by gcapraz
Tue Nov 19, 2019 1:48 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: +9psi map for CVT
Replies: 40
Views: 12856

Re: +9psi map for CVT

Just to update this thread. For us CVT users running on 92octane(100RON.) In reality, you would like to add +9psi(24psi) from 4000rpm upto 5500rpm only and quickly drop it to +6(21psi) upto redline or around 6000rpm. The reason is, I found that running higher than 21psi after 5500rpm is simply kill...
by gcapraz
Tue Nov 19, 2019 1:41 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: How to set knock ignition table
Replies: 1
Views: 766

How to set knock ignition table

Hi Everyone, I want to learn kncok ignition limit table setting issue. I have some log that which part i need to consider and check it that i need to know it. For example i learned from my car, between 5500-60000d/d knock control is increasing from 54 to 65 very quickly and also aftercooler temps is...
by gcapraz
Tue Nov 05, 2019 5:49 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Fuel Economy
Replies: 12
Views: 8379

Re: Fuel Economy

what if we check use map to determine wot and rewrite on wot table over 12.5? is it work?
Because if not check it car stays 2 second on 14.7 afr at full throttle then wot table works.
So my solution is check it use map to determine wot and rewrite wot table.
by gcapraz
Tue Oct 29, 2019 9:45 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Some questions for tuning 1.5t
Replies: 0
Views: 2878

Some questions for tuning 1.5t

Hi everyone 1) I would like to know is there any afr value of l15b7. I know that it depends of which modifications and octane of gasoline. Maybe someone can share some experience. 2) I need to find 27won w1 turbo base tunes. Does flashpro have it? 3) is there anyone who used water/meth kit? Hows the...
by gcapraz
Thu Oct 17, 2019 3:47 am
Forum: FlashPro Manager
Topic: FlashProManager 3.4.7
Replies: 1
Views: 839

Re: FlashProManager 3.4.5

civic uk g82 mods screen problem solved with new version.
Thanks hondata