Thank you good sir. Will do...I was going to have him put the MAP in another car, but I guess the ECU will need to also. Two bird with ones...nm.
:)
Search found 37 matches
- Tue Mar 11, 2014 1:04 pm
- Forum: K-Pro / KManager
- Topic: MAP sensor issue
- Replies: 2
- Views: 1520
- Tue Mar 11, 2014 7:58 am
- Forum: K-Pro / KManager
- Topic: Daughterboard error + misfire/hesitation
- Replies: 9
- Views: 3294
Re: Daughterboard error + misfire/hesitation
I had this problem also for a long time.
Replaced batteries and didnt help. I had to clean the POS cables to relay box, and replaced both my battery cables. Problem solved.
BUT, it does happen when my battery is bad and needs to be replaced. This happened last fall.
Replaced batteries and didnt help. I had to clean the POS cables to relay box, and replaced both my battery cables. Problem solved.
BUT, it does happen when my battery is bad and needs to be replaced. This happened last fall.
- Tue Mar 11, 2014 7:44 am
- Forum: K-Pro / KManager
- Topic: car stalls after fill up ep3
- Replies: 6
- Views: 3506
Re: car stalls after fill up ep3
Dont disable itr in Kpro. If stuck open that wont help. If your not going to replace it (which I would do), then unplug it from the throttle body and plug BOTH the purge hose and throttle vacumm fitting. You can also leave it on the engine but unplug the line from the tank and put a plug AND clamp f...
- Tue Mar 11, 2014 7:33 am
- Forum: K-Pro / KManager
- Topic: MAP sensor issue
- Replies: 2
- Views: 1520
MAP sensor issue
Tried searching, couldnt get results.... K24A1 swapped into EG. Kpro 440cc injectors Told its a K20A2 harness and ECU (helping an individual out of my area) Problem is his map sensor is not reading properly. STOCK map sensor option gives idle vacuum of about 90kpa and full throttle at 100kpa. Car ob...
- Tue Mar 11, 2014 6:23 am
- Forum: K-Pro / KManager
- Topic: search function fail
- Replies: 1
- Views: 1169
search function fail
searched for +issue and got 3500 matches of the 16,000 posts....but search for +MAP +sensor in title only and get an error saying its too common.
Any suggestions on searching for MAP sensor issues without getting all posts with the word issue and NONE with the words MAP sensor?
Thnx in advance.
Any suggestions on searching for MAP sensor issues without getting all posts with the word issue and NONE with the words MAP sensor?
Thnx in advance.
- Thu Jan 09, 2014 2:50 pm
- Forum: K-Pro Calibrations
- Topic: Dip in torque curve
- Replies: 18
- Views: 11110
Re: Dip in torque curve
But i believe my cams are at 30 degrees around those rpms. I'll check when im home. We believe the dip is from the 3 inch. But i can test, normally i should feel the difference. Your VTEC point is set too high. Try what Rikitaun suggested with the angles...he about dead on from what I get when tuni...
- Thu Jan 09, 2014 2:26 pm
- Forum: K-Pro Calibrations
- Topic: kal for k20a3 with intake and exhaust
- Replies: 6
- Views: 3744
Re: kal for k20a3 with intake and exhaust
welltal89 wrote:Perfect, and thank you for the quick response!
Wow....havent seen the Name Welltall in a while. Is this the original one with the White EP3 turbo frank motor? Seen you years back on EP3Hatch forum and Kseries.
Just currious.
- Thu Jul 11, 2013 7:55 am
- Forum: K-Pro / KManager
- Topic: Knock Sensor
- Replies: 0
- Views: 2350
Knock Sensor
Anyone have information on the Knock Sensor circuit for the K motors?
I need to know what gain and inegrator settings the stock ECU uses. (if any).
thnx
I need to know what gain and inegrator settings the stock ECU uses. (if any).
thnx
- Thu Mar 08, 2012 12:28 pm
- Forum: K-Pro Calibrations
- Topic: Looking for 2 basemaps
- Replies: 5
- Views: 2642
Re: Looking for 2 basemaps
Honda plugs are hot, amber color of the porcelain looks about right.
Lighter on the electode where heat can not dissitpate but carbon on threads where it can.
Maybe my standards are different, but these plug to me wouldnt warrant a second look.
Lighter on the electode where heat can not dissitpate but carbon on threads where it can.
Maybe my standards are different, but these plug to me wouldnt warrant a second look.
- Fri Sep 30, 2011 8:32 am
- Forum: K-Pro Calibrations
- Topic: 2005 Civic SI K24 Rev Hard w/ RC 750cc
- Replies: 4
- Views: 2310
Re: 2005 Civic SI K24 Rev Hard w/ RC 750cc
I can get you a really close kal. downloaded later tonight or tomorrow.
I have a K24A1 turbo a K24/K20Z3 hybrid turbo, and K20A3 turbo with several kal. for each.
Tell me more about the setup and I can get you what you need.
thnx
I have a K24A1 turbo a K24/K20Z3 hybrid turbo, and K20A3 turbo with several kal. for each.
Tell me more about the setup and I can get you what you need.
thnx
- Mon Apr 26, 2010 8:24 pm
- Forum: K-Pro / KManager
- Topic: Online problems
- Replies: 2
- Views: 1636
- Fri Apr 23, 2010 1:55 pm
- Forum: K-Pro Calibrations
- Topic: 2003 k24a4 Accord Turbo I A Need base Calibration
- Replies: 5
- Views: 6061
- Fri Apr 23, 2010 1:40 pm
- Forum: K-Pro / KManager
- Topic: car starts hen dies
- Replies: 2
- Views: 1871
- Fri Apr 23, 2010 1:34 pm
- Forum: K-Pro / KManager
- Topic: Online problems
- Replies: 2
- Views: 1636
Online problems
2005 Si with K24 swap and turbo. When I use my charger while tuning, I lose communication with ECU. Three different laptops all do the same thing. How do I solve this? Also, I noticed while in "IGN" view in 3D map, the tracing is not following the IGN but appears to follow MAP but displays...
- Thu Jan 28, 2010 10:06 pm
- Forum: K-Pro Calibrations
- Topic: stock K24A1 Another noob looking for a base calibration...
- Replies: 19
- Views: 14234