Search found 191 matches

by deafy
Thu Jul 02, 2015 5:09 pm
Forum: K-Pro / KManager
Topic: k20z3 turbo suddenly lean only in 5th gear
Replies: 3
Views: 2361

Re: k20z3 turbo suddenly lean only in 5th gear

That's odd. I've ran these files on 3 separate computers with no issues. All of them are up to date as well.
by deafy
Thu Jul 02, 2015 4:36 pm
Forum: K-Pro / KManager
Topic: k20z3 turbo suddenly lean only in 5th gear
Replies: 3
Views: 2361

Re: k20z3 turbo suddenly lean only in 5th gear

I've looked all over this thing. It seems it only started doing this after the latest software update. Based off my s300 experience, I've checked for rev limiter per gear and speed limiter, was not able to find anything of the like. Would really like to get this resolved by tomorrow evening for the ...
by deafy
Wed Jul 01, 2015 11:09 pm
Forum: K-Pro / KManager
Topic: k20z3 turbo suddenly lean only in 5th gear
Replies: 3
Views: 2361

k20z3 turbo suddenly lean only in 5th gear

Had a chance to test and tune the car tonight, working on getting the boost controller settings properly set up. The setup is a stock k20z3 with pt6262 @19psi dynotuned by slowmotion. At all our prior test and tune nights, we have never encountered this weird issue. At the top of 5th gear around 750...
by deafy
Wed Jun 17, 2015 5:47 pm
Forum: Traction Control with KPro
Topic: Speed sensor type issue
Replies: 6
Views: 15023

Re: Speed sensor type issue

Everything works great, just need to fiddle with it and learn it more. Feels strong off the line and through 2nd gear on street tires with 508whp. Thank you for the help with the wiring and such.
by deafy
Sun May 17, 2015 9:57 am
Forum: Traction Control with KPro
Topic: Speed sensor type issue
Replies: 6
Views: 15023

Re: Speed sensor type issue

Finally got around to wiring this up. With the ABS controller deleted, can the active sensors be wired directly to TC unit (both wires per sensor wired to TC unit)? Another question, TC unit is to be wired to same power and ground as the PCM. Based on an RSX engine harness, would that be IG1 on E9 f...
by deafy
Mon Nov 25, 2013 10:50 am
Forum: Traction Control with KPro
Topic: Speed sensor type issue
Replies: 6
Views: 15023

Re: Speed sensor type issue

Wire a 150 ohm resistor in EACH input or just the active inputs? Does the system utilize all 4 sensors?
by deafy
Sun Nov 24, 2013 10:30 pm
Forum: Traction Control with KPro
Topic: Speed sensor type issue
Replies: 6
Views: 15023

Speed sensor type issue

Having done some research on TCS, liking the reviews it is getting. My question is, since there is a switch to set it to active OR inductive type, and my vehicle has BOTH types (one type front, other type rear), what can I do to make this system work? The vehicle is a 2000 insight with k20z3, so it ...
by deafy
Wed Apr 07, 2010 2:44 pm
Forum: S300 Calibrations
Topic: looking for base map b18c boosted !!!
Replies: 1
Views: 2382

Use the supplied b18c calibration within the program and set fuel trim to 880cc. Thats how i got my buddy's b18c 550cc started.
by deafy
Fri May 15, 2009 6:43 pm
Forum: S300 Calibrations
Topic: HELP!!!! Rellay need a p72 base map
Replies: 1
Views: 2189

its listed in SManager when you click "File" then "New"... one is JDM and one USDM.
by deafy
Thu Apr 30, 2009 10:31 am
Forum: s300 / SManager
Topic: Water/Meth Injection help.. *fixed* Diagram Made
Replies: 9
Views: 6182

when water/meth is spraying, you'll want to advance timing and lower fuel. Make sure you do have a wideband sensor wired up as well. Hondata has Lean protection as one of their failsafes. The dyno is the best way to get the tuning as perfect as possible.
by deafy
Tue Apr 28, 2009 5:55 pm
Forum: s300 / SManager
Topic: Water/Meth Injection help.. *fixed* Diagram Made
Replies: 9
Views: 6182

perhaps you can wire the switch to the floater, then floater to the ecu in a series circuit. With switch and floater completing circuit, 2nd map engages. when floater gets low, circuit disengages, back to primary map.
by deafy
Tue Apr 28, 2009 10:21 am
Forum: s300 / SManager
Topic: Smanager wish list
Replies: 150
Views: 152841

Personally I would like the option of PSI for a vacuum unit. Actually all of the pressure units should be available in the vacuum section for consistency. It is difficult to implement vacuum into a unit that is solely for pressure, which is opposite of vacuum. What would -10psi be equivalent to in ...
by deafy
Fri Apr 24, 2009 6:20 pm
Forum: S300 Calibrations
Topic: prelude base map calibration question
Replies: 13
Views: 9456

Its working pretty good for me so far. 3 years and running.
by deafy
Fri Apr 24, 2009 10:09 am
Forum: S300 Calibrations
Topic: prelude base map calibration question
Replies: 13
Views: 9456

The "prelude" calibration under smanager is for the h22. I'm not sure if its for the JDM or USDM ludes though. Its the map i started out with, left the timing as it is and adjusted fuel map a bit.
by deafy
Tue Apr 21, 2009 6:56 pm
Forum: S300 Calibrations
Topic: Anyone have map for E85??
Replies: 6
Views: 6492

About how much timing advance is needed when switching from 93 octane to E85?