Hello, will the speed limiter option soon added to the CRZ calibrations ? it seams not important for many people but for us it is..
Many thanks and very good job on all your very good products!
Search found 27 matches
- Sun Sep 09, 2012 11:50 pm
- Forum: FlashPro Manager
- Topic: CRZ speed limiter
- Replies: 1
- Views: 1750
- Thu Feb 28, 2008 2:30 pm
- Forum: s100/s200
- Topic: idle problem when switch to closed loop
- Replies: 5
- Views: 5739
Hello EITCP, I was fooled by the fact to entry my wideband signal in the O2 input. I had all tuned in open loop everythink ok but when swith in closed loop it was around 30% too lean column 1 and 2 and 20% 3 and 4 and so on till 8% too lean at WOT. (not boosted) So if you made the same mistake as me...
- Thu Feb 28, 2008 2:25 pm
- Forum: Romeditor 4 Software
- Topic: Difference between open loop map and closed loop map...?
- Replies: 15
- Views: 23018
Oh my got, everything ok now.... :D I really thought that the entry with the wideband in the O2 input was Ok. I tried in the ELD input and everything is OK!! I was very fooled by the fact that in open loop it work but the table is altered by this in closed loop.. Sorry having you disturbing Spunkste...
- Thu Feb 28, 2008 8:40 am
- Forum: Romeditor 4 Software
- Topic: Difference between open loop map and closed loop map...?
- Replies: 15
- Views: 23018
Here is how I connect the wideband: I cut the white wire (O2 wire) and install a micro plug. That allow me to connect either the 0-5v from the wideband or the stock O2 sensor wire. (but never both signal) So when I tune open loop I plug the wideband 0-5v in the input O2 and set in the option menu/ s...
- Wed Feb 27, 2008 3:03 pm
- Forum: Romeditor 4 Software
- Topic: Difference between open loop map and closed loop map...?
- Replies: 15
- Views: 23018
- Wed Feb 27, 2008 2:45 pm
- Forum: Romeditor 4 Software
- Topic: Difference between open loop map and closed loop map...?
- Replies: 15
- Views: 23018
Yes a AEM UEGO gauge. Open loop connected to the O2 input with the parameter from AEM like 0.75v=11.5ARF, 1=12, 1.25=12.5, 1.5=13 and so one. I also controlled the voltage offset which is -0.17v to have the gauge and the s200 with the same value. I already used this Wideband to tune an ITR but with ...
- Wed Feb 27, 2008 10:25 am
- Forum: Romeditor 4 Software
- Topic: Difference between open loop map and closed loop map...?
- Replies: 15
- Views: 23018
Hello, Here are the BIN files with new datalog file recorded just a few minute ago. There are 1 BIN open loop and 1 CLOSED loop with my actual calibration and each datalog file recorded. As you can see open loop there is INJ 2ms and in closed loop the same but with 38% short term correction... When ...
- Wed Feb 27, 2008 10:18 am
- Forum: Romeditor 4 Software
- Topic: Difference between open loop map and closed loop map...?
- Replies: 15
- Views: 23018
Hello, Here are the BIN files with new datalog file recorded just a few minute ago. There are 1 BIN open loop and 1 CLOSED loop with each datalog file recorded. As you can see open loop there is INJ 2ms and in closed loop the same but with 38% short term correction... When in closed loop mode correc...
- Tue Feb 26, 2008 1:40 pm
- Forum: Romeditor 4 Software
- Topic: Difference between open loop map and closed loop map...?
- Replies: 15
- Views: 23018
- Tue Feb 26, 2008 12:39 pm
- Forum: Romeditor 4 Software
- Topic: Difference between open loop map and closed loop map...?
- Replies: 15
- Views: 23018
here the calibration .BIN I've made by mistake the day before. It should be similar column 1 to 5 but column 6 to 10 not fine tuned. (the BIN file is from Saturday but I fine tuned the column 6 to 10 Sunday and haven't the s200 cable here at home...) Do you think it could come that I made the whole ...
- Tue Feb 26, 2008 10:37 am
- Forum: Romeditor 4 Software
- Topic: Difference between open loop map and closed loop map...?
- Replies: 15
- Views: 23018
Hello Spunkster, I haven't answer you correctly as you maybe understand that I changed the voltage target and have no more problem... No, to be more correct, I changed to 0.45v and then it was also to about 15-20% short term correction... (with long term also) I compared two datalog records to under...
- Mon Feb 25, 2008 2:31 pm
- Forum: Romeditor 4 Software
- Topic: Difference between open loop map and closed loop map...?
- Replies: 15
- Views: 23018
Yes I tried. It was first to 0.51 I think, and I had to change it to 0.45 which is the stock voltage for 14.7 following the stock O2 setting in the seting menu. So after corrected the around 20% requested by the short term, it was well working around 0.45. The O2 is the stock sensor from the car wit...
- Mon Feb 25, 2008 12:54 pm
- Forum: s100/s200
- Topic: idle problem when switch to closed loop
- Replies: 5
- Views: 5739
Hello EITCP, It's seems that I have the same problem... Everything ok in open loop and then when switching in closed loop, the short term compensate to about +20% fuel... Like my map is really too lean at idle and column 1... but in open loop I am at 14.7... Did you find something about this problem...
- Mon Feb 25, 2008 11:23 am
- Forum: Romeditor 4 Software
- Topic: Difference between open loop map and closed loop map...?
- Replies: 15
- Views: 23018
Difference between open loop map and closed loop map...?
Hello, I just tuned the whole week end a b16a with the s200. Everything was very good and the column 1 to 5 at 14.7. After all the test I then switched to closed loop to control that everything will going right. At Idle the short term correct to about +20%... (too lean..) so then I tried to come bac...
- Thu Feb 21, 2008 1:36 pm
- Forum: s300 / SManager
- Topic: Problem after conneting the USB to my computer
- Replies: 2
- Views: 1735