Search found 27 matches

by Gigi
Sun Sep 09, 2012 11:50 pm
Forum: FlashPro Manager
Topic: CRZ speed limiter
Replies: 1
Views: 1750

CRZ speed limiter

Hello, will the speed limiter option soon added to the CRZ calibrations ? it seams not important for many people but for us it is..

Many thanks and very good job on all your very good products!
by Gigi
Thu Feb 28, 2008 2:30 pm
Forum: s100/s200
Topic: idle problem when switch to closed loop
Replies: 5
Views: 5739

Hello EITCP, I was fooled by the fact to entry my wideband signal in the O2 input. I had all tuned in open loop everythink ok but when swith in closed loop it was around 30% too lean column 1 and 2 and 20% 3 and 4 and so on till 8% too lean at WOT. (not boosted) So if you made the same mistake as me...
by Gigi
Thu Feb 28, 2008 2:25 pm
Forum: Romeditor 4 Software
Topic: Difference between open loop map and closed loop map...?
Replies: 15
Views: 23011

Oh my got, everything ok now.... :D I really thought that the entry with the wideband in the O2 input was Ok. I tried in the ELD input and everything is OK!! I was very fooled by the fact that in open loop it work but the table is altered by this in closed loop.. Sorry having you disturbing Spunkste...
by Gigi
Thu Feb 28, 2008 8:40 am
Forum: Romeditor 4 Software
Topic: Difference between open loop map and closed loop map...?
Replies: 15
Views: 23011

Here is how I connect the wideband: I cut the white wire (O2 wire) and install a micro plug. That allow me to connect either the 0-5v from the wideband or the stock O2 sensor wire. (but never both signal) So when I tune open loop I plug the wideband 0-5v in the input O2 and set in the option menu/ s...
by Gigi
Wed Feb 27, 2008 3:03 pm
Forum: Romeditor 4 Software
Topic: Difference between open loop map and closed loop map...?
Replies: 15
Views: 23011

Oh, Spunkster, Is there a difference using the O2 input or the D10-ELD Input with the wideband?? I have not tried using the D10-ELD, I just plug the Wideband in the O2 input and then changed the parameters to stock O2 (quick setting) to read the O2 sensor in closed loop.

Am I right??
by Gigi
Wed Feb 27, 2008 2:45 pm
Forum: Romeditor 4 Software
Topic: Difference between open loop map and closed loop map...?
Replies: 15
Views: 23011

Yes a AEM UEGO gauge. Open loop connected to the O2 input with the parameter from AEM like 0.75v=11.5ARF, 1=12, 1.25=12.5, 1.5=13 and so one. I also controlled the voltage offset which is -0.17v to have the gauge and the s200 with the same value. I already used this Wideband to tune an ITR but with ...
by Gigi
Wed Feb 27, 2008 10:25 am
Forum: Romeditor 4 Software
Topic: Difference between open loop map and closed loop map...?
Replies: 15
Views: 23011

Hello, Here are the BIN files with new datalog file recorded just a few minute ago. There are 1 BIN open loop and 1 CLOSED loop with my actual calibration and each datalog file recorded. As you can see open loop there is INJ 2ms and in closed loop the same but with 38% short term correction... When ...
by Gigi
Wed Feb 27, 2008 10:18 am
Forum: Romeditor 4 Software
Topic: Difference between open loop map and closed loop map...?
Replies: 15
Views: 23011

Hello, Here are the BIN files with new datalog file recorded just a few minute ago. There are 1 BIN open loop and 1 CLOSED loop with each datalog file recorded. As you can see open loop there is INJ 2ms and in closed loop the same but with 38% short term correction... When in closed loop mode correc...
by Gigi
Tue Feb 26, 2008 1:40 pm
Forum: Romeditor 4 Software
Topic: Difference between open loop map and closed loop map...?
Replies: 15
Views: 23011

Ok, I will make a BIN tomorrow with datalog.

Have a nice day.
by Gigi
Tue Feb 26, 2008 12:39 pm
Forum: Romeditor 4 Software
Topic: Difference between open loop map and closed loop map...?
Replies: 15
Views: 23011

here the calibration .BIN I've made by mistake the day before. It should be similar column 1 to 5 but column 6 to 10 not fine tuned. (the BIN file is from Saturday but I fine tuned the column 6 to 10 Sunday and haven't the s200 cable here at home...) Do you think it could come that I made the whole ...
by Gigi
Tue Feb 26, 2008 10:37 am
Forum: Romeditor 4 Software
Topic: Difference between open loop map and closed loop map...?
Replies: 15
Views: 23011

Hello Spunkster, I haven't answer you correctly as you maybe understand that I changed the voltage target and have no more problem... No, to be more correct, I changed to 0.45v and then it was also to about 15-20% short term correction... (with long term also) I compared two datalog records to under...
by Gigi
Mon Feb 25, 2008 2:31 pm
Forum: Romeditor 4 Software
Topic: Difference between open loop map and closed loop map...?
Replies: 15
Views: 23011

Yes I tried. It was first to 0.51 I think, and I had to change it to 0.45 which is the stock voltage for 14.7 following the stock O2 setting in the seting menu. So after corrected the around 20% requested by the short term, it was well working around 0.45. The O2 is the stock sensor from the car wit...
by Gigi
Mon Feb 25, 2008 12:54 pm
Forum: s100/s200
Topic: idle problem when switch to closed loop
Replies: 5
Views: 5739

Hello EITCP, It's seems that I have the same problem... Everything ok in open loop and then when switching in closed loop, the short term compensate to about +20% fuel... Like my map is really too lean at idle and column 1... but in open loop I am at 14.7... Did you find something about this problem...
by Gigi
Mon Feb 25, 2008 11:23 am
Forum: Romeditor 4 Software
Topic: Difference between open loop map and closed loop map...?
Replies: 15
Views: 23011

Difference between open loop map and closed loop map...?

Hello, I just tuned the whole week end a b16a with the s200. Everything was very good and the column 1 to 5 at 14.7. After all the test I then switched to closed loop to control that everything will going right. At Idle the short term correct to about +20%... (too lean..) so then I tried to come bac...
by Gigi
Thu Feb 21, 2008 1:36 pm
Forum: s300 / SManager
Topic: Problem after conneting the USB to my computer
Replies: 2
Views: 1735

Thanks Spunkster. So it's not recomended to plug or unplug the laptop with the motor on.. Ok my laptop USB work well with the s200.

So I will send the s300 to CPL Racing to check it. Thanks