Search found 32 matches
- Thu Apr 21, 2011 9:15 am
- Forum: K-Pro / KManager
- Topic: k24A2 DC5 stalls when throttle is applied
- Replies: 2
- Views: 2134
- Wed Apr 20, 2011 6:40 pm
- Forum: K-Pro / KManager
- Topic: k24A2 DC5 stalls when throttle is applied
- Replies: 2
- Views: 2134
k24A2 DC5 stalls when throttle is applied
KManager v1.4.1.0 2002 Acura RSX-S K24a2 Swap KPro E85 fuel Open header 09 TSX Pistons, Forged Rods, Z1 Intake Cam with 50 degree VTC Gear, Walbro 255lph Fuel pump, RC 750cc injectors, Type-S oil pump, Complete Type-S wire harness. Problem: -----------------------------------------------------------...
- Wed Apr 29, 2009 10:38 am
- Forum: K-Pro / KManager
- Topic: Sputter@5800rpm and wall at 7k rpm
- Replies: 13
- Views: 5525
- Tue Apr 28, 2009 9:39 am
- Forum: K-Pro / KManager
- Topic: Sputter@5800rpm and wall at 7k rpm
- Replies: 13
- Views: 5525
- Mon Apr 27, 2009 11:29 am
- Forum: K-Pro / KManager
- Topic: Sputter@5800rpm and wall at 7k rpm
- Replies: 13
- Views: 5525
- Wed Apr 22, 2009 7:59 pm
- Forum: K-Pro / KManager
- Topic: Sputter@5800rpm and wall at 7k rpm
- Replies: 13
- Views: 5525
- Wed Apr 22, 2009 1:53 pm
- Forum: K-Pro / KManager
- Topic: Sputter@5800rpm and wall at 7k rpm
- Replies: 13
- Views: 5525
Well I got the car back on after doing what you said, and ran a 3rd gear datalog with the right map this time (the one I posted earlier was an older one) and I will post them up tonight after work. Cranny with my foot to the floor the TPS read 98 so it is still a WOT run in case you are wondering, I...
- Wed Apr 22, 2009 10:06 am
- Forum: K-Pro / KManager
- Topic: Sputter@5800rpm and wall at 7k rpm
- Replies: 13
- Views: 5525
- Wed Apr 22, 2009 8:24 am
- Forum: K-Pro / KManager
- Topic: Sputter@5800rpm and wall at 7k rpm
- Replies: 13
- Views: 5525
- Wed Apr 22, 2009 6:45 am
- Forum: K-Pro / KManager
- Topic: Sputter@5800rpm and wall at 7k rpm
- Replies: 13
- Views: 5525
- Tue Apr 21, 2009 6:15 pm
- Forum: K-Pro / KManager
- Topic: Sputter@5800rpm and wall at 7k rpm
- Replies: 13
- Views: 5525
Sputter@5800rpm and wall at 7k rpm
Here are a few datalogs I recorded showing the problem as well as a cruising datalog to show how rich it is running.
Currently running:
Stock K20a2
Greddy Turbo
750cc injectors
ips kt1 cams
walbro fuel pump
greddy evo tt
unforgettable test pipe
stock fuel system no return
ngk bk8reix plugs
Currently running:
Stock K20a2
Greddy Turbo
750cc injectors
ips kt1 cams
walbro fuel pump
greddy evo tt
unforgettable test pipe
stock fuel system no return
ngk bk8reix plugs
- Thu Feb 21, 2008 1:11 pm
- Forum: Hondata News
- Topic: Hondata 4 Bar MAP sensor
- Replies: 7
- Views: 36078
- Wed Nov 21, 2007 11:08 am
- Forum: K-Pro / KManager
- Topic: High RPM Sputter and Cutoff help
- Replies: 3
- Views: 2692
Ok so should I lower the short term fuel trim? This wasn't the first datalog run this was after doing at least 4 pulls does that make any difference in the starting water temp (is it higher than normal?) Also I run 10psi high boost it's just that I run about 7psi for daily driving thats why I have a...
- Tue Nov 20, 2007 6:28 pm
- Forum: K-Pro / KManager
- Topic: High RPM Sputter and Cutoff help
- Replies: 3
- Views: 2692
High RPM Sputter and Cutoff help
Ok guys I need your help once again. I had my shop replace the crank sensor and it seems to have helped the problem to a degree. Now I think that my tuning may be off so maybe you can let me know what you see. Attached is the calibration and the datalog for it. Let me know what you think. Setup: k20...
- Fri Sep 14, 2007 7:07 am
- Forum: Non-Hondata
- Topic: RSX Engine Harness removal/install
- Replies: 0
- Views: 2598
RSX Engine Harness removal/install
Does anyone have a writeup on how to remove and install a new engine harness into an RSX-S? Thanks!