Welllll, using that calculation its 1.14%. But on the datalog, the difference is around .3-.4 psi which is about 2.5%.
11.9-2.5%=11.6025 guess its all in how one does the math.
Thanks for explaining.
Search found 42 matches
- Wed Oct 20, 2010 6:50 pm
- Forum: K-Pro / KManager
- Topic: question on psi in kmanager 1.4.1
- Replies: 5
- Views: 2269
- Fri Oct 15, 2010 2:03 pm
- Forum: K-Pro / KManager
- Topic: question on psi in kmanager 1.4.1
- Replies: 5
- Views: 2269
- Thu Oct 14, 2010 6:27 pm
- Forum: K-Pro / KManager
- Topic: question on psi in kmanager 1.4.1
- Replies: 5
- Views: 2269
question on psi in kmanager 1.4.1
When I view a datalog on 1.4.0, that was created on 1.4.0, I see psi as high 11.9. The same datalog viewed on 1.4.1 shows pressure of 11.6 at the exact same location on the datalog. 1.4.1 is reading psi .3 or more lower than 1.4.0. through the whole datalog. Is this correct based on the "What's...
- Sat Sep 25, 2010 5:08 pm
- Forum: K-Pro / KManager
- Topic: New Feature Programmed Knock Control Enabled?
- Replies: 6
- Views: 3834
New Feature Programmed Knock Control Enabled?
On the Parameters>Knock/Tps tab there is a new feature "Programmed Knock control Enabled". I can't find any information on it, nothing in the Hlep file. What is this and what does it do enabled or disabled?
- Thu Jan 28, 2010 7:01 pm
- Forum: FlashPro Manager
- Topic: FlashPro and IAT sensor relocation for jrsc
- Replies: 2
- Views: 2424
- Thu Jan 28, 2010 2:58 pm
- Forum: FlashPro Manager
- Topic: FlashPro and IAT sensor relocation for jrsc
- Replies: 2
- Views: 2424
FlashPro and IAT sensor relocation for jrsc
In the FlashPro help file>tuning your vehicle>afm removal, you show an obd1 iat sensor from an integra for the jrsc. Based on testing that has been done with intake air temps, after the supercharger, it doesn't appear that the integra sensor is fast enough to keep up with the temperature rise in the...
- Thu Sep 03, 2009 7:56 am
- Forum: K-Pro / KManager
- Topic: Where is best place for iat sensor for kpro
- Replies: 6
- Views: 3258
- Tue Sep 01, 2009 5:27 pm
- Forum: K-Pro / KManager
- Topic: Where is best place for iat sensor for kpro
- Replies: 6
- Views: 3258
Yes, however I wanted to measure the air temps coming out of the cooler. The spot for the integra sensor is not the ideal for my purpose. I am aware that the gm sensor reads a few degrees low compared to actual. Is the Integra sensor the same as a Civic SI sensor? There is about a $40.00 difference ...
- Tue Sep 01, 2009 12:54 pm
- Forum: K-Pro / KManager
- Topic: Where is best place for iat sensor for kpro
- Replies: 6
- Views: 3258
Where is best place for iat sensor for kpro
2002 RSX type-s JRSC 3.0 inch pulley, approx 10psi aftercooler in JRSC manifold gm iat sensor directly under cooler core in JRSC manifold My question is this, where would be the better place to get the intake air temp for Kpro from? I can use either the stock iat in my Injen cai, or I can use the gm...
- Wed Aug 19, 2009 5:38 pm
- Forum: K-Pro / KManager
- Topic: 3bar or 5bar option with Hondata 4bar map sensor?
- Replies: 4
- Views: 2387
- Wed Aug 19, 2009 5:22 am
- Forum: K-Pro / KManager
- Topic: 3bar or 5bar option with Hondata 4bar map sensor?
- Replies: 4
- Views: 2387
3bar or 5bar option with Hondata 4bar map sensor?
What option in Kmanager should I use for a Hondata 4bar map sensor for the tables? Options are 3bar map tables or 5bar map tables. I will be making around 11 psi with a JRSC.
uncledan
uncledan
- Mon Jul 20, 2009 11:20 am
- Forum: K-Pro / KManager
- Topic: Questions on Integra air temp sensor on JRSC
- Replies: 4
- Views: 2585
Thanks for the reply. What about multiple readouts on Kmanager using available inputs to the ecu sensor window? Is that doable? spending $100.00 for a couple of integra sensors would help my build budget alot more than what a multiple display would cost. Plus the ability to get the data from one sou...
- Mon Jul 20, 2009 8:38 am
- Forum: K-Pro / KManager
- Topic: Questions on Integra air temp sensor on JRSC
- Replies: 4
- Views: 2585
Questions on Integra air temp sensor on JRSC
I searched but did not find the answers I am looking for. I have a JRSC on an '02 RSX type-S and want to get additional air temp readings. If I mount an integra air temp sensor in the jrsc, is there a way to get either the actual temp reading, or the voltage/output of the integra sensor on a datalog...
- Mon Jul 13, 2009 10:27 am
- Forum: s300 / SManager
- Topic: usb touching ecu case
- Replies: 2
- Views: 1443
- Mon Jul 13, 2009 7:46 am
- Forum: s300 / SManager
- Topic: usb touching ecu case
- Replies: 2
- Views: 1443
usb touching ecu case
I know I read somewhere on the Hondata website about not letting the usb plug touch the ecu case. I have searched and can't find it now.
What happens if the usb plug hits the case? What gets damaged?
What happens if the usb plug hits the case? What gets damaged?