Search found 43 matches

by Malkolm666
Wed Jun 10, 2020 6:47 am
Forum: Civic Si 2012-2015 US/Canadian / 2013+ ILX
Topic: bad drivability below 2000rpm, bad idle
Replies: 4
Views: 258

Re: bad drivability below 2000rpm, bad idle

Im not the one with an attitude. Now you have written 2 replies in my thread and both are depreciatory.

Please be kind, helpful and humble instead if you choose to write in a forum like this.

I gladly appriceate any help with the problems in this car!
by Malkolm666
Mon Jun 08, 2020 8:49 pm
Forum: Civic Si 2012-2015 US/Canadian / 2013+ ILX
Topic: bad drivability below 2000rpm, bad idle
Replies: 4
Views: 258

Re: bad drivability below 2000rpm, bad idle

Its a swapped car you can say. I just took whatever map I could find and tuned on a dyno with. Car is supercharged. If you had looked at the log you had seen that. More questions isnt helping me. What I want is answers on why the DBW behaves so por below 2000-2500rpms.

Thanks!
/Malkolm
by Malkolm666
Mon Jun 08, 2020 1:16 am
Forum: Civic Si 2012-2015 US/Canadian / 2013+ ILX
Topic: bad drivability below 2000rpm, bad idle
Replies: 4
Views: 258

bad drivability below 2000rpm, bad idle

hi, cant get the car to idle correct. Drives bad below 2000rpm, deacc & accelerate how it want to, seems like the thottlebody is fluctating ~4-7% alot. DBW is not stable at low rpms. Usually throws P050A, Cold start idle air control system performance problem. (car had no issues before Hondata was i...
by Malkolm666
Sun May 31, 2020 1:22 pm
Forum: Coil Pack Retrofit
Topic: CPR - problems and solutions! Cuts, misfiring and MIL
Replies: 3
Views: 495

Re: CPR - problems and solutions! Cuts, misfiring and MIL

Raised the boost 1psi to 16psi and the misfires are back. Now I dont know what to do. Im qlueless.
by Malkolm666
Sun May 31, 2020 11:17 am
Forum: Coil Pack Retrofit
Topic: CPR - problems and solutions! Cuts, misfiring and MIL
Replies: 3
Views: 495

CPR - problems and solutions! Cuts, misfiring and MIL

Hi, car was running perfect with the old distributor. B16a2 turbo 15psi making 400whp. Installing Hondata CPR and got heavy misfires above 5500rpm(above 7psi), MIL lights up yellow (but no errorcodes). Changed the aftermarket distrubitor to an OEM dizzy. Now it starts to run much better in high rpm’...
by Malkolm666
Fri Aug 24, 2018 8:58 am
Forum: K-Pro / KManager
Topic: PRB oem lambda doesnt read richer then 11.4 anymore!
Replies: 1
Views: 411

PRB oem lambda doesnt read richer then 11.4 anymore!

Hi, PRB ecu, k24a3, turbo Garrett GT2860rs with 10psi, PRB stock oem wideband lambda. 2 questions: *I noticed that on dyno it wont show richer then 11.4, Even when the real value is done to 9´s. it only show a straight line 11.4-11.5. Tried 2 used lambdas in good condiotion and then bought a new sen...
by Malkolm666
Fri Mar 23, 2018 7:31 pm
Forum: K-Pro / KManager
Topic: Car wont Start, need help and advice
Replies: 2
Views: 715

Re: Car wont Start, need help and advice

Found it! When all the connectors to the ecu was cut(previous owner) there was 2pair of wires that had the same colors. 2 was YELLOW and the other 2 was BLACK/WHITE. The yellows was to reverselightsensor and to multiplexor. If you switch them wrong you only get an errorcode on the Multiplexor. No wo...
by Malkolm666
Thu Mar 22, 2018 11:10 am
Forum: K-Pro / KManager
Topic: Car wont Start, need help and advice
Replies: 2
Views: 715

Car wont Start, need help and advice

Hi, I dont think there is any problem with the kpro or ecu. Problem is that car wont start. Car is EDM Civic Type R EP3. This is what I have done this winter: rebuild engine, changed tranny, changed TB from a EDM CRV(TPS has a different angle then on k20a2) changed engine harness from a EDM CRV that...
by Malkolm666
Tue Oct 10, 2017 12:46 pm
Forum: TSX 2004-2014
Topic: Stock TB is closing after 7000rpm
Replies: 5
Views: 2217

Re: Stock TB is closing after 7000rpm

I found the speed limiter, its under Speed Cut in "rev Limits". But that was set to 328kph, why is it slowing done the TB at 217-220kph? A bug?
by Malkolm666
Tue Oct 10, 2017 10:28 am
Forum: TSX 2004-2014
Topic: Stock TB is closing after 7000rpm
Replies: 5
Views: 2217

Re: Stock TB is closing after 7000rpm

Okey, thanks. Im gonna dyno next time on a lower gear.

Do you have a time frame for next release? A couple of weeks? A month? More?
by Malkolm666
Mon Oct 09, 2017 3:31 pm
Forum: TSX 2004-2014
Topic: Stock TB is closing after 7000rpm
Replies: 5
Views: 2217

Stock TB is closing after 7000rpm

Hi, I have a -04 CL9 with TSX 07 ecu, and flashpro. Have driven it with flashpro for over a year now. With the stock engine It never was never any problem(I attache a log from the dyno "rsp_231hk"). I have no CELs. Everything else works great. Now I have built engine with higher comp and DC stage4 c...
by Malkolm666
Tue Jun 13, 2017 5:51 pm
Forum: K-Pro / KManager
Topic: S2000 kpro wiring for race car
Replies: 6
Views: 1042

Re: S2000 kpro wiring for race car

Thanks!
by Malkolm666
Tue Jun 13, 2017 11:54 am
Forum: K-Pro / KManager
Topic: S2000 kpro wiring for race car
Replies: 6
Views: 1042

Re: S2000 kpro wiring for race car

Please respond asap, car is supposed to go on the dyno tomorrow. Ive already wired in a innovate gauge and lqmbda to the kpro.

Now its just the cam & crank sensors I need to wire correctly.
by Malkolm666
Tue Jun 13, 2017 10:27 am
Forum: K-Pro / KManager
Topic: S2000 kpro wiring for race car
Replies: 6
Views: 1042

Re: S2000 kpro wiring for race car

2054-101582

43342
by Malkolm666
Tue Jun 13, 2017 7:55 am
Forum: K-Pro / KManager
Topic: S2000 kpro wiring for race car
Replies: 6
Views: 1042

S2000 kpro wiring for race car

Hi, Im building a race harness for a track car. It has a F20c engine and a PRB ecu with kpro v4 build for the s2000. The owner has lost the harness for the new Camsensor and Cranksensor. What pinout should I wire them to? We have a RSX primary wideband lambda, what do I need to do to make it work? (...