Search found 48 matches

by Malkolm666
Sat Feb 12, 2022 11:49 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Cruise control is acting weird, accelerate and then decelerate all the time
Replies: 2
Views: 669

Re: Cruise control is acting weird, accelerate and then decelerate all the time

What can be possible faults when Cruise controll is not working correct?
by Malkolm666
Wed Jan 12, 2022 3:49 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Cruise control is acting weird, accelerate and then decelerate all the time
Replies: 2
Views: 669

Cruise control is acting weird, accelerate and then decelerate all the time

Hi,cruise control is acting weird, its never steady at speed, is drops and rises 10kmh al the time when Cruise is active.

Car is 2017 civic hatchback 1.5T CVT european.
Civic-Turbo-2016-2-Tuned-High-International_CVT_MalkolmV1.fpcal
1.5T international CVT
(20.54 KiB) Downloaded 87 times
by Malkolm666
Thu Nov 19, 2020 1:24 pm
Forum: Civic Si 2012-2015 US/Canadian / 2013+ ILX
Topic: bad drivability below 2000rpm, bad idle
Replies: 5
Views: 6801

Re: bad drivability below 2000rpm, bad idle

Found the issue, problem with the MAF-sensor..
by Malkolm666
Wed Nov 18, 2020 12:38 am
Forum: K-Pro / KManager
Topic: Wont go in closed lopp
Replies: 3
Views: 1938

Re: Wont go in closed lopp

But it wont adjust to 14.7.
by Malkolm666
Tue Nov 17, 2020 12:10 pm
Forum: K-Pro / KManager
Topic: Wont go in closed lopp
Replies: 3
Views: 1938

Wont go in closed lopp

Hi, have a K20a2 that wont go in closed loop,
PRC ecu
Kpro v4 with software 4.4.4
Innovate LC-2 widebandlambda
E85

Tune_ClosedLoop_OKT2020.kal
(163.75 KiB) Downloaded 133 times
idle_closedLoop_not_working.kdl
(2.25 MiB) Downloaded 139 times
by Malkolm666
Wed Jun 10, 2020 6:47 am
Forum: Civic Si 2012-2015 US/Canadian / 2013+ ILX
Topic: bad drivability below 2000rpm, bad idle
Replies: 5
Views: 6801

Re: bad drivability below 2000rpm, bad idle

Im not the one with an attitude. Now you have written 2 replies in my thread and both are depreciatory.

Please be kind, helpful and humble instead if you choose to write in a forum like this.

I gladly appriceate any help with the problems in this car!
by Malkolm666
Mon Jun 08, 2020 8:49 pm
Forum: Civic Si 2012-2015 US/Canadian / 2013+ ILX
Topic: bad drivability below 2000rpm, bad idle
Replies: 5
Views: 6801

Re: bad drivability below 2000rpm, bad idle

Its a swapped car you can say. I just took whatever map I could find and tuned on a dyno with. Car is supercharged. If you had looked at the log you had seen that. More questions isnt helping me. What I want is answers on why the DBW behaves so por below 2000-2500rpms.

Thanks!
/Malkolm
by Malkolm666
Mon Jun 08, 2020 1:16 am
Forum: Civic Si 2012-2015 US/Canadian / 2013+ ILX
Topic: bad drivability below 2000rpm, bad idle
Replies: 5
Views: 6801

bad drivability below 2000rpm, bad idle

hi, cant get the car to idle correct. Drives bad below 2000rpm, deacc & accelerate how it want to, seems like the thottlebody is fluctating ~4-7% alot. DBW is not stable at low rpms. Usually throws P050A, Cold start idle air control system performance problem. (car had no issues before Hondata w...
by Malkolm666
Sun May 31, 2020 1:22 pm
Forum: Coil Pack Retrofit
Topic: CPR - problems and solutions! Cuts, misfiring and MIL
Replies: 4
Views: 9542

Re: CPR - problems and solutions! Cuts, misfiring and MIL

Raised the boost 1psi to 16psi and the misfires are back. Now I dont know what to do. Im qlueless.
by Malkolm666
Sun May 31, 2020 11:17 am
Forum: Coil Pack Retrofit
Topic: CPR - problems and solutions! Cuts, misfiring and MIL
Replies: 4
Views: 9542

CPR - problems and solutions! Cuts, misfiring and MIL

Hi, car was running perfect with the old distributor. B16a2 turbo 15psi making 400whp. Installing Hondata CPR and got heavy misfires above 5500rpm(above 7psi), MIL lights up yellow (but no errorcodes). Changed the aftermarket distrubitor to an OEM dizzy. Now it starts to run much better in high rpm’...
by Malkolm666
Fri Aug 24, 2018 8:58 am
Forum: K-Pro / KManager
Topic: PRB oem lambda doesnt read richer then 11.4 anymore!
Replies: 1
Views: 830

PRB oem lambda doesnt read richer then 11.4 anymore!

Hi, PRB ecu, k24a3, turbo Garrett GT2860rs with 10psi, PRB stock oem wideband lambda. 2 questions: *I noticed that on dyno it wont show richer then 11.4, Even when the real value is done to 9´s. it only show a straight line 11.4-11.5. Tried 2 used lambdas in good condiotion and then bought a new sen...
by Malkolm666
Fri Mar 23, 2018 7:31 pm
Forum: K-Pro / KManager
Topic: Car wont Start, need help and advice
Replies: 2
Views: 1500

Re: Car wont Start, need help and advice

Found it! When all the connectors to the ecu was cut(previous owner) there was 2pair of wires that had the same colors. 2 was YELLOW and the other 2 was BLACK/WHITE. The yellows was to reverselightsensor and to multiplexor. If you switch them wrong you only get an errorcode on the Multiplexor. No wo...
by Malkolm666
Thu Mar 22, 2018 11:10 am
Forum: K-Pro / KManager
Topic: Car wont Start, need help and advice
Replies: 2
Views: 1500

Car wont Start, need help and advice

Hi, I dont think there is any problem with the kpro or ecu. Problem is that car wont start. Car is EDM Civic Type R EP3. This is what I have done this winter: rebuild engine, changed tranny, changed TB from a EDM CRV(TPS has a different angle then on k20a2) changed engine harness from a EDM CRV that...
by Malkolm666
Tue Oct 10, 2017 12:46 pm
Forum: TSX 2004-2014
Topic: Stock TB is closing after 7000rpm
Replies: 5
Views: 6325

Re: Stock TB is closing after 7000rpm

I found the speed limiter, its under Speed Cut in "rev Limits". But that was set to 328kph, why is it slowing done the TB at 217-220kph? A bug?
by Malkolm666
Tue Oct 10, 2017 10:28 am
Forum: TSX 2004-2014
Topic: Stock TB is closing after 7000rpm
Replies: 5
Views: 6325

Re: Stock TB is closing after 7000rpm

Okey, thanks. Im gonna dyno next time on a lower gear.

Do you have a time frame for next release? A couple of weeks? A month? More?