probably had a bad upload, try clear security, wait atleast 2 minutes after clearing before attempting upload, if the upload doesn't go slow then clear security a second time.
This should make sure you get a good upload and then the car will most likely function properly.
Search found 70 matches
- Thu May 13, 2010 6:39 pm
- Forum: K-Pro / KManager
- Topic: nobie problems
- Replies: 2
- Views: 1547
- Wed Apr 28, 2010 4:55 pm
- Forum: K-Pro / KManager
- Topic: Tables not updating in kmanager
- Replies: 3
- Views: 2424
Tables not updating in kmanager
I have Kmanager 1.4.0 whenever you select show boost tables or show na tables, you have to either load a new map or close and reopen the tables for them to update. I recall them doing this when you made the selection previously.
- Fri Feb 19, 2010 9:05 am
- Forum: K-Pro / KManager
- Topic: Datalog not recording any info from sensors
- Replies: 14
- Views: 5893
- Thu Feb 18, 2010 11:49 am
- Forum: K-Pro / KManager
- Topic: Datalog not recording any info from sensors
- Replies: 14
- Views: 5893
http://i547.photobucket.com/albums/hh442/baudchaser/plug.jpg Plug was definitely wet when I pulled it, just didn't snap the pic in time. So hopefully this is why it won't start...question now is, what contributed to the rich condition....coulda been the corrupted tune, or fucked up ECT/Fan sensor.....
- Thu Feb 18, 2010 7:44 am
- Forum: K-Pro / KManager
- Topic: Datalog not recording any info from sensors
- Replies: 14
- Views: 5893
- Wed Feb 17, 2010 11:59 am
- Forum: K-Pro / KManager
- Topic: Datalog not recording any info from sensors
- Replies: 14
- Views: 5893
- Wed Feb 17, 2010 11:02 am
- Forum: K-Pro / KManager
- Topic: Datalog not recording any info from sensors
- Replies: 14
- Views: 5893
OK...cleared the ECU and uploaded my previously working map. I can now see sensor data in KManager, but car won't start....wondering if I fouled up my plugs from running extremely rich for a day? Close down K-manager, unplug USB and then reopen and attach everything. Make sure the upload takes the ...
- Wed Feb 17, 2010 9:01 am
- Forum: K-Pro / KManager
- Topic: Datalog not recording any info from sensors
- Replies: 14
- Views: 5893
Re: Datalog not recording any info from sensors
K-Pro Serial: 06957 KManager Vers: 2.02 Calibration: Stock Datalog: Can't get one... Vehicle: '03 Type-S ECU: '03 Type-S Modifications: I/RH/E/Motor Mounts Symptoms: (1) I can connect to, and upload/download calibrations to K-Pro, but when I try and datalog, there is no data (rpms, MAP, etc stay at...
- Wed Feb 17, 2010 7:30 am
- Forum: K-Pro / KManager
- Topic: JDM EP3 Type-R idle problem - high idle rpm
- Replies: 4
- Views: 6295
- Mon Feb 15, 2010 7:06 am
- Forum: K-Pro / KManager
- Topic: very strange un heard of problem
- Replies: 4
- Views: 2423
- Sat Feb 13, 2010 6:24 am
- Forum: K-Pro / KManager
- Topic: Can't datalog PLX wideband below 1.2V
- Replies: 26
- Views: 18059
- Fri Feb 12, 2010 10:20 pm
- Forum: K-Pro / KManager
- Topic: Battery Light
- Replies: 40
- Views: 11539
Basically stock d17a1. d16y8 intake mani, I/H/E that normal sort of stuff. The only thing pertinent I can think of is that the battery was relocated. But even with the relocation, for the life of me I can't figure out why it would be throwing a battery light. Voltage checks out at the alternator an...
- Thu Feb 11, 2010 6:22 pm
- Forum: K-Pro / KManager
- Topic: Can't datalog PLX wideband below 1.2V
- Replies: 26
- Views: 18059
Have you tried connecting the analog ground from the PLX to the valve cover? If that does not help, I would recommend contacting PLX Devices. Come on, that is a crap answer, he put a multimeter on the analog out put and got 0-5v as he should, he moved the ground to the valve cover like he said and ...
- Thu Feb 11, 2010 9:58 am
- Forum: K-Pro / KManager
- Topic: Can't datalog PLX wideband below 1.2V
- Replies: 26
- Views: 18059
I have just buzzed the PLX 0 to 5V output, and when not connected to Kpro it reads anywhere between 0V (nitrous fuel dumped in) and 5V (clean air), so appears to be working fine. When connected to the Kpro ELD pin it reads between 1.3V (nitrous fuel dumped in) and 5V (clean air), and agrees with wh...
- Tue Feb 09, 2010 2:49 pm
- Forum: K-Pro / KManager
- Topic: Can't datalog PLX wideband below 1.2V
- Replies: 26
- Views: 18059
I moved the earth to the valve cover and removed the capacitor. I set the nitrous output to dump in the extra fuel at idle, so I could test it from a stationary vehicle.The ELD voltage now flatlines at 1.26V, so no real change. Probing the power voltage to the PLX controler its 13.5V which I assume...