Search found 13 matches

by C_Rock77
Fri May 09, 2008 8:27 pm
Forum: s300 / SManager
Topic: Calibrating NTK AFX to work with Hondata Datalogging
Replies: 7
Views: 5562

So...you're saying the stock O2 sensor input can't handle 0-5V input?
by C_Rock77
Fri May 09, 2008 4:26 pm
Forum: S300 Calibrations
Topic: B18Csupercharger 440 injectors
Replies: 7
Views: 27438

Is this the same calibration as the one that comes with the S300, itself?
by C_Rock77
Fri May 09, 2008 3:52 pm
Forum: s300 / SManager
Topic: Calibrating NTK AFX to work with Hondata Datalogging
Replies: 7
Views: 5562

Calibrating NTK AFX to work with Hondata Datalogging

I got my NTK AFX wired into my S300, but the AFR is not displaying correctly. I ran the power (0-5V) output into the stock O2 sensor lead into the Hondata. I tried to follow the instructions on how to calibrate it, but the version of SManager that I have doesn't look like the one they have displayed...
by C_Rock77
Tue Feb 19, 2008 1:03 pm
Forum: s300 / SManager
Topic: Full Throttle Shift & Launch Control keeping Cruise Cont
Replies: 6
Views: 3534

Spunkster wrote: you take the 2 wires and join them together.
The 2 wires of the switch?
by C_Rock77
Tue Feb 19, 2008 12:21 pm
Forum: s300 / SManager
Topic: Full Throttle Shift & Launch Control keeping Cruise Cont
Replies: 6
Views: 3534

Spunkster wrote:Jumper the wires together that connected to the cruise control switch. Cruise will no longer shut off if you hit the clutch.
There any way to do it and keep the original functionality of the switch?

Could you tell me in a little more detail what you mean saying to jumper the wires together?
by C_Rock77
Tue Feb 19, 2008 11:07 am
Forum: s300 / SManager
Topic: Wiring NTK AFX into S300 for datalogging
Replies: 4
Views: 2750

Do not ever get power and ground from the ecu EVER. I can't really tell anything from a picture of wires. You need to look at the wiring diagram for your Wideband and pretty much immitate how it is hooked up with a PLX wideband. I never said anything about getting power and ground from the ECU. I w...
by C_Rock77
Tue Feb 19, 2008 1:43 am
Forum: s300 / SManager
Topic: Full Throttle Shift & Launch Control keeping Cruise Cont
Replies: 6
Views: 3534

Nobody can help me with this?
by C_Rock77
Mon Feb 18, 2008 1:48 pm
Forum: s300 / SManager
Topic: Full Throttle Shift & Launch Control keeping Cruise Cont
Replies: 6
Views: 3534

Full Throttle Shift & Launch Control keeping Cruise Cont

I've been reading up, and see that the FTS and LC can use the clutch switch that's already in the car. My question is how do I use this feature with my S300 and KEEP my full Cruise Control functionality? From what I understand, you can use the clutch switch for FTS and LC, but it has to be disconnec...
by C_Rock77
Mon Feb 18, 2008 1:30 pm
Forum: s300 / SManager
Topic: Wiring NTK AFX into S300 for datalogging
Replies: 4
Views: 2750

http://www.hondata.com/techplxwiring.html The idea is the same, you'll just have to figure out what wires on your wideband do what. Here's the plug that goes into the display unit. It has 2 wires: 1 yellow and 1 brown coming out of the plug with naked ends http://i29.tinypic.com/5x7gh3.jpg I just r...
by C_Rock77
Mon Feb 18, 2008 1:19 pm
Forum: s300 / SManager
Topic: S300 Knock Sensor
Replies: 5
Views: 7124

QUICKSILVER RACING wrote:open your Smanager. Go to parameters -> miscelaneous and tick disable knock sensor.
Thanks...found it. I was looking and looking for that damn thing.
by C_Rock77
Mon Feb 18, 2008 12:32 am
Forum: s300 / SManager
Topic: S300 Knock Sensor
Replies: 5
Views: 7124

Do you have a wideband to confirm that your not running too lean or you have too much ignition advance. Whats the datalog show? I don't see how I could be running lean or with too much ignition advance. It's running a STOCK P72 map. Besides...the CEL comes on when I turn the key on...even before I ...
by C_Rock77
Sun Feb 17, 2008 5:56 pm
Forum: s300 / SManager
Topic: S300 Knock Sensor
Replies: 5
Views: 7124

S300 Knock Sensor

I picked up an S300 unit from a friend. It's installed in a P28. I was running my car (Stock GSR--Intake, header, exhaust) on just your old plain run of the mill OBD1 P72. I have a car I plan to put this S300 on, but was trying to run it on the relatively stock car (which doesn't throw any CELs on t...
by C_Rock77
Sat Feb 09, 2008 9:00 pm
Forum: s300 / SManager
Topic: Wiring NTK AFX into S300 for datalogging
Replies: 4
Views: 2750

Wiring NTK AFX into S300 for datalogging

What all do I need to do to wire this Wideband into my S300? Guys, I'm lost when it comes to this stuff. Could you give me a REALLY basic walkthrough of how to wire this up?