Search found 14 matches
- Fri Oct 03, 2008 9:45 am
- Forum: Romeditor 4 Software
- Topic: Check this out
- Replies: 3
- Views: 15497
- Wed Oct 01, 2008 12:19 pm
- Forum: Romeditor 4 Software
- Topic: Check this out
- Replies: 3
- Views: 15497
- Wed Oct 01, 2008 10:02 am
- Forum: K-Pro / KManager
- Topic: erratic speed sensor
- Replies: 3
- Views: 1800
- Wed Oct 01, 2008 10:00 am
- Forum: Romeditor 4 Software
- Topic: Check this out
- Replies: 3
- Views: 15497
Check this out
Ok, so I tuned this car last week on a small turbo. Customer changed the turbo and came back for a retune. He changed the turbo and the map sensor. Put it on the dyno, get it rolling to calibrate the dyno and this happens. It only happens going into 3rd gear. Changed ECUs, changed blue boxes, change...
- Wed Sep 24, 2008 10:42 pm
- Forum: K-Pro / KManager
- Topic: erratic speed sensor
- Replies: 3
- Views: 1800
- Wed Sep 24, 2008 9:43 pm
- Forum: K-Pro / KManager
- Topic: erratic speed sensor
- Replies: 3
- Views: 1800
erratic speed sensor
check out this log With 2 step activated, the speed sensor reads 19mph When it shows 19 mph, of course 2 step is deactivated and full-throttle shift activates. It sometimes goes up to the 60 mph range. With the 2-step set to something low, say 4000 rpm, this will not happen. speed stays at 0mph like...
- Fri Sep 19, 2008 1:49 pm
- Forum: Romeditor 4 Software
- Topic: Component Q31
- Replies: 1
- Views: 13827
Component Q31
On Nitrous/Aux 2, to use A20 (PCS) output to activate a nitrous relay, what needs to be done to Q31? It is a US P75 ECU. Tried it without changing anything on the board but it will not activate the relay.
Thanks in advance
Thanks in advance
- Wed Jul 30, 2008 1:53 pm
- Forum: K-Pro / KManager
- Topic: ECU shutting down?
- Replies: 11
- Views: 3497
- Wed Jul 30, 2008 1:52 pm
- Forum: K-Pro / KManager
- Topic: ECU shutting down?
- Replies: 11
- Views: 3497
- Wed Jul 30, 2008 1:35 pm
- Forum: K-Pro / KManager
- Topic: ECU shutting down?
- Replies: 11
- Views: 3497
- Wed Jul 30, 2008 1:22 pm
- Forum: K-Pro / KManager
- Topic: ECU shutting down?
- Replies: 11
- Views: 3497
- Wed Jul 30, 2008 12:28 pm
- Forum: K-Pro / KManager
- Topic: ECU shutting down?
- Replies: 11
- Views: 3497
- Wed Jul 30, 2008 9:25 am
- Forum: K-Pro / KManager
- Topic: ECU shutting down?
- Replies: 11
- Views: 3497
it is a 2006 type s. full-race turbo kit. pl4-rc1000s. I was disabling sensors to try to narrow down the problem. for this particular log, they just werent enabled. on previous logs, no knock was detected and the speed sensor was working properly until this glitch or whatever it may be happened. Als...
- Tue Jul 29, 2008 5:37 pm
- Forum: K-Pro / KManager
- Topic: ECU shutting down?
- Replies: 11
- Views: 3497
ECU shutting down?
Check out this log. At the upper rpm range, everything pretty much goes default. All grounds are good, using resistor type plugs. I know its running rich. Any ideas? thanks in advance