Search found 13 matches

by NtegraDryvr
Tue Oct 20, 2015 11:22 am
Forum: K-Pro / KManager
Topic: KPro / KManager requests
Replies: 146
Views: 833341

Re: KPro / KManager requests

2 requests 1. I am desperately needing a delay function added to the Nitrous fuel & ign tables that I am using for water methanol injection. I spray 45GPH (2835cc/min) worth of 80% methanol to water in 2 stages (20gph then 25gph). What is happening is that the computer removes fuel before the WM...
by NtegraDryvr
Fri Feb 06, 2015 8:48 am
Forum: K-Pro / KManager
Topic: Lean protection not engaging
Replies: 5
Views: 3070

Re: Lean protection not engaging

I am going to attempt stepping down my injection from 45gph to around 34gph at the same mixture in hopes this becomes easier to tune and hopefully lean protection will start working. My theory is that there is/was so much meth that when lean protection was activated the nitrous controls were still a...
by NtegraDryvr
Tue Feb 03, 2015 7:46 am
Forum: K-Pro / KManager
Topic: Lean protection not engaging
Replies: 5
Views: 3070

Re: Lean protection not engaging

I tuned it on 91 before the water meth quite conservatively around 11.5AFR which is about as low as the oem wideband can read. Then the water meth comes on and I have to remove fuel to keep it around 11.7AFR. I spray so much that if I don't remove that much fuel it goes ultra rich and falls on its f...
by NtegraDryvr
Mon Feb 02, 2015 2:53 pm
Forum: K-Pro / KManager
Topic: Lean protection not engaging
Replies: 5
Views: 3070

Re: Lean protection not engaging

I spray 45GPH (2,835cc) worth of 76% methanol to water mix under boost which is why it removes so much fuel. That is why I need the nitrous controls to deactivate upon leancut. I never used to have an issue until now and I'm not sure if something changed with the way Kpro handles lean protection or ...
by NtegraDryvr
Fri Jan 30, 2015 11:57 pm
Forum: K-Pro / KManager
Topic: Lean protection not engaging
Replies: 5
Views: 3070

Lean protection not engaging

Attached is my kal and kdl for my water meth injected m62 powered k24. Look how lean it gets and does not stop regardless of my settings that used to work. I have tried clearing security and reloading the map which made no difference.
by NtegraDryvr
Fri Jan 30, 2015 12:30 pm
Forum: K-Pro / KManager
Topic: KManager difficult to use/see since 4.0.6
Replies: 5
Views: 3159

Re: KManager difficult to use/see since 4.0.6

I have another question/issue as well which I can start another thread for if need be. I run ALOT of water meth. I don't know if this has always been an issue or if I am only noticing it now that I am spraying so much methanol at once to keep my overspun m62 cool. When lean protection engages and pu...
by NtegraDryvr
Thu Jan 29, 2015 4:55 pm
Forum: K-Pro / KManager
Topic: KManager difficult to use/see since 4.0.6
Replies: 5
Views: 3159

Re: KManager difficult to use/see since 4.0.6

If you change the resolution, does it appear normally? Changing the resolution doesn't change how Kmanager is displayed it just makes everything larger. However in display settings I can change the scaling that is built into Windows 8 and turn it down to an unusable 125% like shown here. I run at 2...
by NtegraDryvr
Wed Jan 28, 2015 6:39 pm
Forum: K-Pro / KManager
Topic: KManager difficult to use/see since 4.0.6
Replies: 5
Views: 3159

KManager difficult to use/see since 4.0.6

Ever since I updated from KManager v4.0.4 to 4.0.6 the display and layout is all messed up. Take a look at the attached screen shot. I am running a 3200x1800 resolution on my brand new laptop which is VERY helpful when tuning since I can fit everything on the screen (and the reason I bought it), but...
by NtegraDryvr
Fri Jan 23, 2015 12:24 pm
Forum: K-Pro / KManager
Topic: aem uego 30-4100 fluctuation
Replies: 7
Views: 3823

Re: aem uego 30-4100 fluctuation

You have the 30-4100 digital input as a preset in kmanager, http://honda-tech.com/engine-management-tuning-124/s300-v3-plx-wideband-digital-input-aim-mxl-wiring-custom-mounting-ek-3203138/#post49772904 Is there any truth to Post #20 from the link above stating that the blue serial wire can go to &q...
by NtegraDryvr
Fri Sep 23, 2011 8:38 am
Forum: K-Pro / KManager
Topic: KManager V3.0.3
Replies: 46
Views: 25798

Re: KManager V3.0.0

Very cool I am happy to see this. Will it only work with Kpro v3 or just with the new kmanager and the aftermarket wideband hooked up to the ELD like the old kpro allowed for datalogging?
by NtegraDryvr
Thu Sep 22, 2011 8:10 pm
Forum: K-Pro / KManager
Topic: KManager V3.0.3
Replies: 46
Views: 25798

Re: KManager V3.0.0

With Kpro v3 or with the Kmanager update does that give us the ability to datalog the OEM wideband and an aftermarket wideband like an AEM at the same time while retaining the closed loop & wideband functionality?
by NtegraDryvr
Sat Dec 06, 2008 1:05 am
Forum: K-Pro / KManager
Topic: Kswapped w/ Kpro & Wat/meth on Nitrous Controls
Replies: 1
Views: 1738

Kswapped w/ Kpro & Wat/meth on Nitrous Controls

I enabled nitrous 1, I plugged into E29 for Arming input and E21 for Arming output and uploaded the changes to the ecu. Flipping the switch does not change anything that I can see and I am looking in the tables under N20 Arm and it stays at Off. I have tried inverting both and no change other than i...
by NtegraDryvr
Sun Nov 30, 2008 7:36 pm
Forum: K-Pro / KManager
Topic: Kswapped w/ Nitrous Controls 4 Water/Meth Inj
Replies: 1
Views: 1930

Kswapped w/ Nitrous Controls 4 Water/Meth Inj

Alright I have a K24a2/JRSC swapped 98 DC4 Integra with water/meth system (no nitrous). I am running the Hybrid Racing dash harness that plugs into my Kpro'd PRB ecu using the white plug E. All of the input/outputs listed here have no wires or pins in the plug for them. http://hondata.com/images/kpr...