Search found 17 matches
- Thu Oct 04, 2012 6:12 am
- Forum: CR-Z 2010-2012 US/Europe/Asia
- Topic: Stock/Modified Calibrations
- Replies: 1
- Views: 4889
Stock/Modified Calibrations
Is the "stock calibration" that is included the actual factory honda map/settings, or a stock map configured/tuned by you guys? I know the modified calibrations are tuned/modified "stock" maps. If you remove flashpro from the car, like were to revert back to full stock, does that...
- Sun Apr 04, 2010 7:06 pm
- Forum: s300 / SManager
- Topic: Idle surf after injector change
- Replies: 0
- Views: 1497
Idle surf after injector change
Ok, so let me give a brief run down. Had the car running great for cruising, idle, and WOT. Was previously running 440cc RC injectors. Changed to 900cc injectors from injector clinic, and ever since the idle surfs. I changed the voltage settings that they provided, and the current size to 900. Wheth...
- Mon Apr 20, 2009 12:19 pm
- Forum: K-Pro / KManager
- Topic: Trouble driving while motor is cold
- Replies: 4
- Views: 2957
Has the car been tuned on the dyno yet? I tuned the car on the dyno, runs like a champ. Used the cold air map as a start when we did the tuning. As far as driving around i left the map alone for cruising, except made adjustments to AF to make it closer to 14.7 for cruising, then closed loop to do t...
- Wed Dec 17, 2008 10:23 am
- Forum: Applications
- Topic: S2000 General Question
- Replies: 2
- Views: 2803
- Wed Dec 17, 2008 9:38 am
- Forum: Applications
- Topic: S2000 General Question
- Replies: 2
- Views: 2803
S2000 General Question
Just had a general question about hondata for the s2000. Yes im well aware of the kpro version and conversion to make this work. Just had a question. Was there any reason why the s2000 ecu was never chipped to just use stock ecu instead of going through all the conversion? I think its safe to say at...
- Fri Oct 10, 2008 9:10 am
- Forum: Applications
- Topic: Hondata ECU for 00-05 S2000
- Replies: 66
- Views: 159000
You really need to tune this on the dyno. Just uploading a base calibration and expecting everything to wrok perfectly may damage your engine. There are no immediate plans to provide an AP2 stock calibration as the AP1 can be used fro both to start and begine tuning from. Yes i understand having it...
- Wed Oct 08, 2008 12:02 pm
- Forum: Applications
- Topic: Hondata ECU for 00-05 S2000
- Replies: 66
- Views: 159000
Will there be an AP2 stock map provided anytime soon? Or even the AP2 map used in the 2 reflashes you have for 06+?? I know the ap1 map will run just fine, as iv used ap1 ecu in my car for a few months. But i feel for daily driving the ap2 ecu has a much better feel than the ap1 ecu. Since i have ap...
- Mon Sep 29, 2008 3:58 pm
- Forum: K-Pro / KManager
- Topic: Software not opening after install?
- Replies: 11
- Views: 5665
Your ISP might be caching the DNS entry for hondata.net. To check, open a command prompt window (Start menu, run, enter 'cmd'). type 'ping hondata.net' The IP address should be 74.220.215.52 If not, your ISP is caching the DNS entry for hondata.net when they should not be. Yeah it pings that IP add...
- Mon Sep 29, 2008 3:17 pm
- Forum: K-Pro / KManager
- Topic: Software not opening after install?
- Replies: 11
- Views: 5665
Try launching the software with the network cable disconnected. I disabled my network card instead of unplugged (pain in ass with my docking station setup) and i was able to open it just fine. Any ideas as to why it crashes when connected to the network? Like i said S300 works just fine when on my ...
- Mon Sep 29, 2008 2:46 pm
- Forum: K-Pro / KManager
- Topic: Software not opening after install?
- Replies: 11
- Views: 5665
- Mon Sep 29, 2008 11:52 am
- Forum: K-Pro / KManager
- Topic: Software not opening after install?
- Replies: 11
- Views: 5665
- Mon Sep 29, 2008 10:06 am
- Forum: K-Pro / KManager
- Topic: Software not opening after install?
- Replies: 11
- Views: 5665
Software not opening after install?
I have S300 and KPro installed on my machine. I have the latest 1.2.8 version installed. S300 opens perfectly. When i install kpro, then go to open it nothing happens. I uninstalled and reinstalled but does the same thing. I have Windows XP Pro installed with SP3. I am a computer tech so i have trie...
- Thu Sep 25, 2008 1:18 pm
- Forum: Applications
- Topic: Hondata ECU for 00-05 S2000
- Replies: 66
- Views: 159000
- Thu Sep 25, 2008 12:19 pm
- Forum: Applications
- Topic: Hondata ECU for 00-05 S2000
- Replies: 66
- Views: 159000
- Wed Sep 24, 2008 12:32 pm
- Forum: s300 / SManager
- Topic: Closed loop and wideband.
- Replies: 7
- Views: 5471