Search found 47 matches

by fabiangt79
Wed Jan 24, 2018 12:46 am
Forum: K-Pro / KManager
Topic: Kpro ITB setup, knock limit and Retard maps
Replies: 5
Views: 705

Re: Kpro ITB setup, knock limit and Retard maps

by connecting map sensor and reading map pressure will resolve the knock retard issue?
by fabiangt79
Mon Jan 22, 2018 7:28 pm
Forum: K-Pro / KManager
Topic: Kpro ITB setup, knock limit and Retard maps
Replies: 5
Views: 705

Re: Kpro ITB setup, knock limit and Retard maps

Hi,

MAP Sensor is not connected and there was no reading when tuned.How does this affect the load side?

N-alpha looks up TPS for load right?
by fabiangt79
Tue Jan 16, 2018 10:46 am
Forum: K-Pro / KManager
Topic: Kpro ITB setup, knock limit and Retard maps
Replies: 5
Views: 705

Kpro ITB setup, knock limit and Retard maps

Hi, I have a Kswop 2.4 motor with ITB, using the N-alpha function running TPS as load side on the fuel map i can see 13 colunm tunable. But on the ignition map, i can only see 10 columns tunable, the problem is the Retard,knock ignition low/high map runs to column 13 on WOT, i am facing the car with...
by fabiangt79
Wed Nov 09, 2016 7:55 am
Forum: TSX 2004-2014
Topic: 09 TSX fan control not working
Replies: 3
Views: 2010

09 TSX fan control not working

I used a base map from hondata to flash into this 2009 tsx AT. The fan control does not work according to what i set, its works only from 94 degree and stops at 87 degree. i set it to 90 degree and even disable the second ECT sensor but still does not work. The other issue is the throttle map as sho...
by fabiangt79
Tue Sep 29, 2015 3:01 am
Forum: s300 / SManager
Topic: Smanger V 2.4.5.0
Replies: 1
Views: 688

Smanger V 2.4.5.0

Can hondata provide the link to download this 2.4.5.0, the beta version 2.5.0 is causing a lot of problems. i use it to upload my running map in the car and for no reason it just cuts at 6500 rpm. I used my friends laptop with this version 2.4.5.0 everything runs fine. Appreciate if hondata can help...
by fabiangt79
Sat Aug 16, 2014 3:08 am
Forum: K-Pro / KManager
Topic: Kpro green board V1
Replies: 1
Views: 1541

Kpro green board V1

Can check if the version 1 green kpro board needs to run in the older version software to work well?

I have heard that the new version does not run well in the old version Kpros.

Please advise
by fabiangt79
Fri Feb 15, 2013 9:07 pm
Forum: K-Pro / KManager
Topic: ITB Problems stalling during deceleration
Replies: 12
Views: 3789

Re: ITB Problems stalling during deceleration

Car is a JDM CTR, running on a K20 engine, with a dual adapter hardness with Kpro.

The vehicle is on Toda ITB with A3 cams and toda exhaust system.

Can hondata advise now what is the problem of the CEL popping when the engine stalls?
by fabiangt79
Wed Feb 06, 2013 10:32 am
Forum: K-Pro / KManager
Topic: Analog Input of LC1 is incredibly wrong
Replies: 5
Views: 2134

Re: Analog Input of LC1 is incredibly wrong

I wired the brown wire of the LC-1 to analog 0 and the reading shows 40:1.

What could be the caused?

How can i get a accurate reading in kpro?
by fabiangt79
Sat Feb 02, 2013 1:12 pm
Forum: K-Pro / KManager
Topic: ITB Problems stalling during deceleration
Replies: 12
Views: 3789

Re: ITB Problems stalling during deceleration

Then maybe can you advise why everytime the car stalls the (P1362 TDC Sensor no signal) check engine light comes on?

Is this caused by a faulty crank sensor or wiring problem?

Appreciate if Hondata could shed some light on this?thanks.
by fabiangt79
Fri Feb 01, 2013 6:25 am
Forum: K-Pro / KManager
Topic: ITB Problems stalling during deceleration
Replies: 12
Views: 3789

Re: ITB Problems stalling during deceleration

Could it be my calibration is unsuitable for the JDM CTR to use?

I am using a Cl7R ITB calibration as base and disable whatever that is not required.
by fabiangt79
Fri Feb 01, 2013 5:57 am
Forum: K-Pro / KManager
Topic: ITB Problems stalling during deceleration
Replies: 12
Views: 3789

Re: ITB Problems stalling during deceleration

I noticed when the car stall the TDC sensor check engine light came on, anything to do with the stalling?
by fabiangt79
Thu Jan 31, 2013 11:43 pm
Forum: K-Pro / KManager
Topic: ITB Problems stalling during deceleration
Replies: 12
Views: 3789

Re: ITB Problems stalling during deceleration

JDM CTR, running on ITB to control DBC throttle so need Kpro.
by fabiangt79
Thu Jan 31, 2013 10:01 am
Forum: K-Pro / KManager
Topic: ITB Problems stalling during deceleration
Replies: 12
Views: 3789

Re: ITB Problems stalling during deceleration

You have a number of issues to work through: The speed sensor appears to be of the high frequency type (which is odd on the JDM CTR). Has the transmission been switched? Closed loop is enabled but the o2 sensor error codes are disabled. Has the car got an o2 sensor? IATs are very high. It does not ...
by fabiangt79
Thu Jan 31, 2013 8:41 am
Forum: K-Pro / KManager
Topic: ITB Problems stalling during deceleration
Replies: 12
Views: 3789

ITB Problems stalling during deceleration

I have a Toda ITB running on a Japanese Civic Type R with Toda A3 cams and the conversion hardness to Kpro. The map sensor is installed and plugged in a runner, i have no IACV installed on the harness.The TPS sensors is a new toyota TPS supplied by Toda from 4 wires convert to 3 wires. i have check ...
by fabiangt79
Mon Oct 22, 2012 4:25 am
Forum: K-Pro / KManager
Topic: Knock ignition limit low and high
Replies: 3
Views: 2623

Re: Knock ignition limit low and high

I will give it a try, but how come other cars when i tune not affected by this table only our track car.

The problem is at 7000rpm the torque drops from 27.5kg/mm to 21 kg/mm at 8000rpm.

Can someone share with me why this is happening?Does not seems like is a tuning issue, right?