Search found 18 matches
- Fri Jul 27, 2007 6:47 am
- Forum: K-Pro / KManager
- Topic: Need advice with Toda A3 cams
- Replies: 1
- Views: 1885
Need advice with Toda A3 cams
This is the story below about our unsuccesful installation of A3 cams to EP3. It was our second experience with A3 cams, first time we had not any problems. Have been set up at one time: A3 cams Toda springs Toda tensioner ECU - Hondata K-Pro Right now after start the engine we've found that idle is...
- Tue Feb 27, 2007 9:03 am
- Forum: s300 / SManager
- Topic: High Impedence or Low Impedence injectors?
- Replies: 7
- Views: 4024
Re: High Impedence or Low Impedence injectors?
Which ones does Hondata recommend? In theory low impedence injectors will open faster when using bigger injectors, thus giving better control at idle and low durations. I am using a resistor box right now, just because the car had one to start with although I can run without it if I have the proper...
- Thu Jan 18, 2007 10:25 am
- Forum: K-Pro / KManager
- Topic: Need advice from Hondata or installers
- Replies: 2
- Views: 2016
Need advice from Hondata or installers
We've got PRC ECU of customer, but we are not sure about condition of ECU, it was taken from damaged car and there was no possibility to test it before installation. I've set up K-Pro and tried to ERASE. Erasing is OK. Try to UPLOAD after. Uploading went but TOO FAST, maybe couple of seconds. MIL li...
- Wed Dec 14, 2005 3:10 am
- Forum: s300 / SManager
- Topic: S300 into P72 JDM
- Replies: 8
- Views: 7440
Where are you from?
we have an experience of setting-up of S300 to JDM's ECu.
We could send you the pictures.
We could send you the pictures.
- Tue Dec 06, 2005 5:09 am
- Forum: s300 / SManager
- Topic: S300 & JDM P30
- Replies: 5
- Views: 5133
Yes, we've made it
you can make something like podium with few sockets. It's looks like podium using on S200 with Romulator. You should insert 2 male sockets to the upper level of this podium. Also you should solder 4-pin socket by wires. Sure, you could not to close the cover of ECU after this installation, but I thi...
- Tue Nov 15, 2005 11:55 am
- Forum: Applications
- Topic: Auto tranny application
- Replies: 1
- Views: 1667
Auto tranny application
I know that Hondata does not work with AT. But some guys here was tried with success to link on AT vehicles two ECUs. Unfortunayely only on Toyotas for a while. One ECU for AT operation One ECU for engine All of power supply, grounds and inputs are made parallel for both ECUs. Sure outputs are going...
- Tue Oct 18, 2005 5:47 am
- Forum: s300 / SManager
- Topic: Greddy Profec B high boost activation
- Replies: 5
- Views: 3950
2 RMS
I've tried to find something, but no result.
Am I right that you could make device like this?
If it's possible please send me email with pricing.
PS Can not understand how to send PM on this forum , sorry )))
Am I right that you could make device like this?
If it's possible please send me email with pricing.
PS Can not understand how to send PM on this forum , sorry )))
- Wed Oct 12, 2005 6:41 am
- Forum: s300 / SManager
- Topic: Greddy Profec B high boost activation
- Replies: 5
- Views: 3950
Greddy Profec B high boost activation
I'd like to make auto activation of high boost on Greddy profec. I have got remote button already and push it on 3 gear for high boost. If I understand right I should send one SHORT pulse to the wire connected on the rear side of controller. Which device could I use for this pulse oscillation? All o...
- Fri Jul 01, 2005 6:59 am
- Forum: s100/s200
- Topic: Cuttoff of injectors ??
- Replies: 14
- Views: 7978
Voltage
of TPS is 0.47-0.49 (0-1 degree).
I will try to post datalog shortly.
I will try to post datalog shortly.
- Wed Jun 29, 2005 6:57 am
- Forum: s100/s200
- Topic: Cuttoff of injectors ??
- Replies: 14
- Views: 7978
Cuttoff of injectors ??
During driving on low TPS angles like 2-3 degree sometimes injectors cuttoffs are occuring. It's very annoing stuff.
What is it possible to do?
P.S. TPS is zero when throttle is closed.
What is it possible to do?
P.S. TPS is zero when throttle is closed.
- Mon Mar 21, 2005 3:37 am
- Forum: s100/s200
- Topic: nitrous control help?
- Replies: 8
- Views: 3712
2 RMS
Where can I read more about your ECUs and daughter plate for nitrous purposes?
- Mon Mar 21, 2005 2:53 am
- Forum: s100/s200
- Topic: JDM GSR throttle body
- Replies: 1
- Views: 1582
JDM GSR throttle body
we've set up S200 with JRSC to JDM integra. It has not FAST IDLE valve at all, I don't know why. Because of that we have big problem during cold start.
With stock JDM ECU there are not any problem with cold start.
Now we have USDM P72 ECU and have this problem.
Any ideas about this issue?
With stock JDM ECU there are not any problem with cold start.
Now we have USDM P72 ECU and have this problem.
Any ideas about this issue?
- Thu Oct 28, 2004 6:43 am
- Forum: s100/s200
- Topic: No power gain after 6000?
- Replies: 2
- Views: 1868
We have
in Moscow 92, 95 and 98 octane fuel here. I'm driving on 98. Yes, 30" at WOT, but I'd like to check my start ignition because Hondalogger shows 14" and I set 16" in Romeditor. If my start ignition is 14", I think I have just 28" at WOT. Am I right? Is it possible to set up t...
- Thu Oct 21, 2004 9:58 am
- Forum: s100/s200
- Topic: No power gain after 6000?
- Replies: 2
- Views: 1868
No power gain after 6000?
What should be the reason of that? After 6000 to 7500 power curve looks like horizontal with strange spikes.
Fueling is 12.5
Belt is OK.
Ignition in WOT near 30.
JRSC 7 lbs H22 Prelude
Fueling is 12.5
Belt is OK.
Ignition in WOT near 30.
JRSC 7 lbs H22 Prelude
Chuvak, chto ty
purgu to gonish, napraslinu navodish? Stendov blya jopoi esh, da i stend dlya nastroiki vovse neobyazatelen. Dam ya tebe kartu, tolko hah ona tebe neotstoennaya? Prochitai sperva, o chem sait, potom karty prosi. Prablemy u nego....