spectacle i wasnt implying that boost cut had anything to do with boost control. i was just stating that the solenoid works by grounding it at 100% duty cycle and 0%.
Vaccum lines are correct also. from what hondata said i guess the ecu itself is damaged and unrepairable
Search found 17 matches
- Thu Oct 06, 2011 11:14 am
- Forum: K-Pro / KManager
- Topic: 04-05 S2000 Kpro EBC wiring
- Replies: 9
- Views: 5013
- Wed Sep 28, 2011 4:14 pm
- Forum: K-Pro / KManager
- Topic: 04-05 S2000 Kpro EBC wiring
- Replies: 9
- Views: 5013
Re: 04-05 S2000 Kpro EBC wiring
OK so the EBC still isnt working. I have confirmed that one lead is going to A6 and the other to a switched power source. The solenoid definitely works. ( I took it off A6 and grounded it to chassis and it clicks plus I set boost cut to 12psi, full throttle in 3rd gear and it cut me out) With boost ...
- Wed Sep 28, 2011 12:54 pm
- Forum: K-Pro / KManager
- Topic: 04-05 S2000 Kpro EBC wiring
- Replies: 9
- Views: 5013
04-05 S2000 Kpro EBC wiring
Just to confirm for the 04-05 S2000 Kpro. One wire from the EBC is should go to the A6 pin (not B21 like RSX) and the other to a power source?
- Tue Apr 05, 2011 8:49 pm
- Forum: FlashPro Manager
- Topic: FlashProManager V1.1.8.5 (beta)
- Replies: 50
- Views: 26217
- Wed Mar 23, 2011 7:17 pm
- Forum: S2000 2006-2009 Americas/Europe/Asia
- Topic: Switching from dual ecu kpro to flashpro
- Replies: 2
- Views: 3461
Hi I emailed you guys Monday but still no reply?
My email is idskyline@yahoo.com
My email is idskyline@yahoo.com
- Mon Mar 21, 2011 10:37 pm
- Forum: FlashPro Manager
- Topic: Aftermarket map sensor
- Replies: 1
- Views: 1719
Aftermarket map sensor
Does flashpro accept map sensors from other brands (like Kpro) besides hondata? It doesnt look like it from what i see in the help file but i just want to make sure.
- Fri Mar 18, 2011 9:44 am
- Forum: S2000 2006-2009 Americas/Europe/Asia
- Topic: Switching from dual ecu kpro to flashpro
- Replies: 2
- Views: 3461
Switching from dual ecu kpro to flashpro
Hi if I were to switch from my current dual ecu kpro to the flashpro would I need to send in my ecu for a flash back to stock settings or can I use the flash back to stock feature of the flashpro? If in fact I do need to send in the ecu how much is it and would there be a discount if I want the boos...
- Wed Mar 16, 2011 12:39 am
- Forum: K-Pro / KManager
- Topic: S2k P0720 error with new KManager
- Replies: 11
- Views: 5189
- Fri Nov 05, 2010 1:09 pm
- Forum: K-Pro / KManager
- Topic: Kpro knock control explained
- Replies: 8
- Views: 8513
- Thu Nov 04, 2010 7:00 pm
- Forum: K-Pro / KManager
- Topic: Kpro knock control explained
- Replies: 8
- Views: 8513
- Tue Aug 31, 2010 3:22 pm
- Forum: K-Pro / KManager
- Topic: S2000 Dual ECU Kpro... Does it have knock feedback?
- Replies: 2
- Views: 1672
- Thu Aug 26, 2010 7:18 pm
- Forum: K-Pro / KManager
- Topic: S2000 Dual ECU Kpro... Does it have knock feedback?
- Replies: 2
- Views: 1672
S2000 Dual ECU Kpro... Does it have knock feedback?
Does the Dual ecu Kpro receive knock feedback from the stock MY06+ knock sensor?
When I datalog it reads 1 or 2 sometimes but my tuner said the S2000 knock sensor isnt compatible with the dual ecu kpro.
I just want to make sure if this is true or not.
When I datalog it reads 1 or 2 sometimes but my tuner said the S2000 knock sensor isnt compatible with the dual ecu kpro.
I just want to make sure if this is true or not.
- Tue Sep 01, 2009 4:19 pm
- Forum: K-Pro Calibrations
- Topic: Problem with Fan always on (MY06+ S2000)
- Replies: 8
- Views: 4215
- Tue Sep 01, 2009 4:14 pm
- Forum: K-Pro Calibrations
- Topic: Problem with Fan always on (MY06+ S2000)
- Replies: 8
- Views: 4215
the fan is set to come on too early. change it to 190 or 195. It doesnt matter what I set it to in the final tune. It will still run when the key is in and the ect is only 100 degrees or less. Like i said the fan only kicks in at 168 on the base tune. which is how i would like it on my final tune. ...
- Mon Aug 31, 2009 10:17 pm
- Forum: K-Pro Calibrations
- Topic: Problem with Fan always on (MY06+ S2000)
- Replies: 8
- Views: 4215
Problem with Fan always on (MY06+ S2000)
Hey I have a base tune from my tuner and a final tune.
However when I load my final tune the fan stays on constantly with the key in the ignition.
This goes away if I load the Hondata KW tune or the base tune.
Please have a look at the kals. The fan is set on at 168 degree on both kals.
However when I load my final tune the fan stays on constantly with the key in the ignition.
This goes away if I load the Hondata KW tune or the base tune.
Please have a look at the kals. The fan is set on at 168 degree on both kals.