Search found 136 matches

by blacksi76
Wed May 20, 2020 5:47 am
Forum: s300 / SManager
Topic: Ignition Timing Sync
Replies: 10
Views: 2118

Re: Ignition Timing Sync

Yes thanks, I appreciate all the feedback.
by blacksi76
Tue May 19, 2020 12:27 pm
Forum: s300 / SManager
Topic: Ignition Timing Sync
Replies: 10
Views: 2118

Re: Ignition Timing Sync

It started with the new forward facing manifold and new turbo system I installed a few years back.its bad placement yes but others who had the same exact setup, motor, manifold by the same fabricator haven't had the issues I'm having. I have two Tial V60's now on my manifold and from the last log I ...
by blacksi76
Mon May 18, 2020 5:27 pm
Forum: s300 / SManager
Topic: Ignition Timing Sync
Replies: 10
Views: 2118

Re: Ignition Timing Sync

I'll keep you posted thanks
by blacksi76
Mon May 18, 2020 4:16 pm
Forum: s300 / SManager
Topic: Ignition Timing Sync
Replies: 10
Views: 2118

Re: Ignition Timing Sync

I will check this week. Keeping in mind the car does run great and the tune is good. If the base timing is off by 10 degrees for example, to get it close would I need to rescale my ignition maps by adding 10 degrees once the base timing is correct at 16 and in sync with the ECU? I know ideally I'd h...
by blacksi76
Mon May 18, 2020 12:00 pm
Forum: s300 / SManager
Topic: Ignition Timing Sync
Replies: 10
Views: 2118

Re: Ignition Timing Sync

I spoke to my tuner last night, he said that he usually always sets the timing himself before he starts the tuning process, but he said that occasionally he doesn't under certain circumstances. I have to verify my timing first to see. I get the car warmed up, click the online button in smanager, cli...
by blacksi76
Sun May 17, 2020 5:02 pm
Forum: s300 / SManager
Topic: Ignition Timing Sync
Replies: 10
Views: 2118

Ignition Timing Sync

2000 Civic S300 V3 H-series 533HP at 19lbs 717HP at 29lbs Since I had my car tuned I've been having issues with Boost creep. I've tried everything, and it's still there. Forward facing custom manifold with a TialQ V60, now with two Tial V60's to try and fix the creep. The only thing I haven't looked...
by blacksi76
Thu Oct 05, 2017 1:14 pm
Forum: s300 / SManager
Topic: Hondata 4 port boost solenoid
Replies: 8
Views: 2649

Re: Hondata 4 port boost solenoid

Great thanks, so basically trying various frequencies to be able to hit my desired boost levels and keep my datalogs to make sure things are steady
by blacksi76
Thu Oct 05, 2017 11:57 am
Forum: s300 / SManager
Topic: Hondata 4 port boost solenoid
Replies: 8
Views: 2649

Re: Hondata 4 port boost solenoid

So I should be able to have just as good a control of my wastegate using the hondata 4 port boost solenoid as the 3 port with the added advantage of not having to swap out springs to reach higher boost levels
by blacksi76
Thu Oct 05, 2017 10:41 am
Forum: s300 / SManager
Topic: Hondata 4 port boost solenoid
Replies: 8
Views: 2649

Re: Hondata 4 port boost solenoid

Yeah that's what was told to me by a few very popular tuners in the Industry, they suggested I use a dual 3 port setup for my single tial V60 for better control
by blacksi76
Thu Oct 05, 2017 9:54 am
Forum: s300 / SManager
Topic: Hondata 4 port boost solenoid
Replies: 8
Views: 2649

Re: Hondata 4 port boost solenoid

Thanks so I have it set at 25hz now . I have to redo my boost table because of a faulty wastegate diaphragm so hopefully it works out. Can you explain what the resolution means specifically, I hear alot of people telling me that with a 4 Port I'm losing the resolution I had with my old 3 port. Thanks
by blacksi76
Thu Oct 05, 2017 9:47 am
Forum: s300 / SManager
Topic: Setting up Low/High boost control
Replies: 1
Views: 1033

Setting up Low/High boost control

I'd like to set up the low/high boost control settings so I don't have to use two separate maps, does it have to be an external switch wired to the given ecu inputs? Can an analog or Digital input be used that plugs directly to the S300 version 3 board? Thanks
by blacksi76
Thu Oct 05, 2017 9:42 am
Forum: s300 / SManager
Topic: quick spool/ activation pressure
Replies: 8
Views: 4965

Re: quick spool/ activation pressure

Interesting topic, I've played with the quick spool feature and for whatever reason I always overboost in every gear, like it's very sensitive as to what to set the values in the quick spool box to get it right.
by blacksi76
Thu Oct 05, 2017 9:38 am
Forum: s300 / SManager
Topic: Hondata 4 port boost solenoid
Replies: 8
Views: 2649

Hondata 4 port boost solenoid

When using a Hondata 4 port boost solenoid what is the recommended Solenoid Frequency for best controlling boost in ranges from 19lbs for a low boost street tune and a high boost 29lbs max boost? Thanks
by blacksi76
Mon Aug 21, 2017 4:03 pm
Forum: s300 / SManager
Topic: Wideband datalog problem
Replies: 11
Views: 4159

Re: Wideband datalog problem

Another
by blacksi76
Mon Aug 21, 2017 12:38 pm
Forum: s300 / SManager
Topic: Wideband datalog problem
Replies: 11
Views: 4159

Re: Wideband datalog problem

Here's the wiring