Search found 42 matches

by terenceng
Thu Apr 10, 2014 2:05 pm
Forum: FlashPro Manager
Topic: FlashProManager V1.8.3 beta (Bluetooth)
Replies: 92
Views: 42350

Re: FlashProManager V1.8.0 beta (Bluetooth)

My flashpro is left in car from previous datalogging session. Reached destination, turned off engine. Later when I turned key to ignition position the flashpro power light comes on for a sec then off. After that, the flashpro stays off even after engine is started. excatly the same problem as one o...
by terenceng
Mon Apr 07, 2014 7:06 pm
Forum: FlashPro Manager
Topic: FlashProManager V1.8.3 beta (Bluetooth)
Replies: 92
Views: 42350

Re: FlashProManager V1.8.0 beta (Bluetooth)

Hondata wrote:The 3 digit codes are part numbers (RTW-U51) and the 4 digit codes are calibration IDs (RTW-U510).

Does it mean version v1.8 is now supported ECU code RTW-U51? Asian First Generation CVT CRZ?

Thanks!
Terence
by terenceng
Mon Apr 07, 2014 2:16 am
Forum: FlashPro Manager
Topic: FlashProManager V1.8.3 beta (Bluetooth)
Replies: 92
Views: 42350

Re: FlashProManager V1.8.0 beta (Bluetooth)

I read the flash pro help file. V1.8.1 (4 Apr 2014) • FlashPro firmware updated to version 63 • Bluetooth enabled • [2012+ Civic] Added support for RX0-K020 through RX0-K060 • [07-08 TSX] Added ability to program AT ECU with MT program • [TL] Added ability to program AT ECU with MT program, only bas...
by terenceng
Mon Mar 17, 2014 8:52 pm
Forum: CR-Z 2010-2012 US/Europe/Asia
Topic: Hondata FlashPro for Asia CRZ - Manual Trasmission
Replies: 9
Views: 16573

Re: Hondata FlashPro for Asia CRZ - Manual Trasmission

I think Hondata not interested to make it better for CRZ.

The only way for AutoStop should be Pivot ISC then..
by terenceng
Mon Feb 10, 2014 2:25 am
Forum: CR-Z 2010-2012 US/Europe/Asia
Topic: Support of RTW-D52
Replies: 3
Views: 11494

Re: Support of RTW-D52

We will wait for it.....
by terenceng
Mon Nov 25, 2013 12:35 am
Forum: CR-Z 2010-2012 US/Europe/Asia
Topic: Hondata FlashPro for Asia CRZ - CVT Auto Trasmission
Replies: 6
Views: 13069

Re: Hondata FlashPro for Asia CRZ - CVT Auto Trasmission

As I can see ASIA CRZ CVT is supported in Flashpro Manager v1.6.3.0.

Does it mean hondata flashpro will support ASIA CRZ CVT soon??
by terenceng
Mon Nov 25, 2013 12:34 am
Forum: CR-Z 2010-2012 US/Europe/Asia
Topic: Throttle plate tables
Replies: 6
Views: 12264

Re: Throttle plate tables

This issue was solved in Hondata Flashpro Manger version 1.6.3.0.

Thank you.
by terenceng
Mon Sep 02, 2013 2:17 am
Forum: CR-Z 2010-2012 US/Europe/Asia
Topic: Throttle plate tables
Replies: 6
Views: 12264

Re: Throttle plate tables

May I know what is the default value?
by terenceng
Fri Aug 30, 2013 1:02 am
Forum: CR-Z 2010-2012 US/Europe/Asia
Topic: Throttle plate tables
Replies: 6
Views: 12264

Re: Throttle plate tables

Other calibration like Japan, Euro or US the Load Index is not editable, only Asia Calibration P020, the Load index is editable. I am confused when editing the load index, i can see there are 6 option in the drop down panel (kPa, inches, mbar, bar, Kpa, psi, kg/cm), but which one shall i use?... tha...
by terenceng
Wed Aug 28, 2013 2:17 am
Forum: CR-Z 2010-2012 US/Europe/Asia
Topic: Hondata FlashPro for Asia CRZ - Manual Trasmission
Replies: 9
Views: 16573

Re: Hondata Flashpro for Asia CRZ

1. Yes, however the ECU will only let the idle speed drop so low. eg if you set all the tables to 600 rpm the ECU will not go below 750 rpm. 2. Return to stock, do a couple of dyno runs, then upload your calibration, dyno & compare. 3. Dyno tuning is preferred, but more depends on the experienc...
by terenceng
Mon Aug 26, 2013 9:37 am
Forum: CR-Z 2010-2012 US/Europe/Asia
Topic: Hondata FlashPro for Asia CRZ - Manual Trasmission
Replies: 9
Views: 16573

Re: Hondata FlashPro for Asia CRZ - Manual Trasmission

One more question to add... 4. As I understand, "VTEC Oil Pressure Switch" is not a sensor, but a switch. Meaning it is either open or closed... Typically, with a switch, once it sees a certain oil pressure, it opens. Once oil pressure drops below that certain pressure, it closes. Am i rig...
by terenceng
Thu Aug 22, 2013 7:31 pm
Forum: CR-Z 2010-2012 US/Europe/Asia
Topic: Hondata FlashPro for Asia CRZ - CVT Auto Trasmission
Replies: 6
Views: 13069

Re: FlashPro for Asia CVT CRZ

Hi,

I knew that this is a repeated question which was already answered.

But many of my friends still keep asking when will Hondata release the product for Asia CRZ.

We hope Hondata can add some plan for it.

Thank you,
by terenceng
Thu Aug 22, 2013 7:28 pm
Forum: CR-Z 2010-2012 US/Europe/Asia
Topic: Hondata FlashPro for Asia CRZ - Manual Trasmission
Replies: 9
Views: 16573

Re: Hondata Flashpro for Asia CRZ

Question... All Asia CRZ comes with "Engine Auto Stop" and "Immobiliser" features, I know these are good for stock car since it comes with it. 1. Once my CRZ is supercharged, will this feature damage my supercharged engine since the charged engine temperature is higher than stock...
by terenceng
Sun Aug 11, 2013 11:33 pm
Forum: CR-Z 2010-2012 US/Europe/Asia
Topic: Hondata FlashPro for Asia CRZ - Manual Trasmission
Replies: 9
Views: 16573

Re: Hondata Flashpro for Asia CRZ

1. Yes, however the ECU will only let the idle speed drop so low. eg if you set all the tables to 600 rpm the ECU will not go below 750 rpm. 2. Return to stock, do a couple of dyno runs, then upload your calibration, dyno & compare. 3. Dyno tuning is preferred, but more depends on the experienc...