Search found 19 matches

by ef9b16a1
Wed Apr 11, 2018 3:14 pm
Forum: Civic Type R 2007-2011 European FN2
Topic: Install solenoid FN2 ECU 2007
Replies: 18
Views: 8350

Re: Install solenoid FN2 ECU 2007

a bit late , but the usdm ecus work fine with the flashpro int version for fn 2, i have 3 cars with usdm ecus for boost control... they work fine with the flashpro -int version , i dont now if the oppossite works though , the flashpro -us , if it works with an edm rsp ecu
by ef9b16a1
Sun Mar 11, 2018 10:44 am
Forum: Applications
Topic: Hondata Boost Solenoid capatability with Kraftwerkz Supercharger
Replies: 2
Views: 2001

Re: Hondata Boost Solenoid capatability with Kraftwerkz Supercharger

you could use a wastegate in the intake pipe and control boost by the solenoid via ecu , it works
by ef9b16a1
Sun Mar 11, 2018 10:40 am
Forum: Applications
Topic: Support for 05 CR-V
Replies: 11
Views: 3286

Re: Support for 05 CR-V

i have a turbo crv 02-04 , you can use a pra ecu if you already have a kpro in it , you just cant control the intake flaps in the plastic manifold with the pra in the k20a3 (i think) 150ps engine , internally the oem ecu is same layout/chipset as a pra , so you can also install k100 kpro etc
by ef9b16a1
Tue Sep 18, 2012 5:36 pm
Forum: Coil Pack Retrofit
Topic: What Spark Plugs do you use with CPR Kit?
Replies: 6
Views: 7128

Re: What Spark Plugs do you use with CPR Kit?

resistor type , i guess ngk (R) if u use ngk
anyone use NON-resistor ngk plugs without having break out issues with the cpr?
by ef9b16a1
Tue Jul 03, 2012 5:52 am
Forum: s300 / SManager
Topic: rev limiter - bog down problem
Replies: 10
Views: 3126

Re: rev limiter - bog down problem

yes sticker guy its a 84 x 87 b18 gtx35r turbo that is running the msd unit now without problems... at 28-30 psi basic diferences are that its obd2a instead of obd1 , and its 9300-9300 rev limit , instead of 9700-10.000 rpm on the case car (83 x 77 b16 6265 turbo) saving up for the hondata coils i g...
by ef9b16a1
Fri Jun 29, 2012 1:01 pm
Forum: s300 / SManager
Topic: rev limiter - bog down problem
Replies: 10
Views: 3126

Re: rev limiter - bog down problem

msd unit is now working in another car with no problems...
it is something about THIS particular car.. that i cant figure out yet , will let the board know if and when i do..
stock dizzie for this car i guess..
by ef9b16a1
Fri Jun 29, 2012 12:37 pm
Forum: s300 / SManager
Topic: rev limiter - bog down problem
Replies: 10
Views: 3126

Re: rev limiter - bog down problem

thank you.. for starters, problem went away when i used a BONE STOCK itr dizzie , had to close the plugs gap to 0.44mm to make 30+ psi passes at the drag strip , but worked flawlessely.. the thing is , i have 2 msd dizzies that work in all other cars i have , EXCEPT this car.... its frustrating to s...
by ef9b16a1
Thu Jun 21, 2012 12:42 pm
Forum: s300 / SManager
Topic: rev limiter - bog down problem
Replies: 10
Views: 3126

Re: rev limiter - bog down problem

thanx for the reply.. i ll try another msd unit , and another stock itr dizzie today i tried a v1 s300 , and i thought that was the cure since the car didnt bog @ rev limiter for several pulls... while changing gear @ wot the problem is when i park the car for 1 hour , and THEN i restart it . let it...
by ef9b16a1
Wed Jun 20, 2012 5:38 pm
Forum: s300 / SManager
Topic: rev limiter - bog down problem
Replies: 10
Views: 3126

Re: rev limiter - bog down problem

here , the driver releases the gas while changing gears , and the car accelerates without any problem... below is the datalog at 30+ psi(2.3katharo) the same driver with this car always kept the gas pedal floored at gear changes , and never had any problems ,for about a year , only changes done to t...
by ef9b16a1
Wed Jun 20, 2012 5:22 pm
Forum: s300 / SManager
Topic: rev limiter - bog down problem
Replies: 10
Views: 3126

rev limiter - bog down problem

hello any insight? i have this problem only on this certain car... not always ,but most of the time , it will STAY on the revlimiter.. after u change the gear WOT the car will bog , till after a couple of seconds... REV LIMIT STAYS on , and the injectors still stay at 0% it feels like a boost cut , ...
by ef9b16a1
Mon Jan 23, 2012 12:28 am
Forum: FlashPro Manager
Topic: flashpro connects and locks to fn2 , wont upload or unlock
Replies: 7
Views: 3774

Re: flashpro connects and locks to fn2 , wont upload or unlo

1.2.2.0 fixed the problem.. i wouldnt have tried that not even in 20 years.. since the software identifies 1.1.9.6 as the latest version to download... i guess i got fp units of the latest batch , that have to work only with 1.2.2.0 will have that in mind thanx for the help.. p.s i didnt bother to c...
by ef9b16a1
Mon Jan 23, 2012 12:21 am
Forum: FlashPro Manager
Topic: FlashProManager V1.1.9.6 (beta)
Replies: 132
Views: 44357

Re: FlashProManager V1.1.9.6 (beta)

hi anyone trying the fn2 maf cal with map fuel tables has the following issue? i tuned the part throttle and wot tables , wot is 13.2-13.5 as in my old ''race'' map cal , and my maf cal car works great map looks very smooth BUT while slamming the tpedal , i get a very rich reading (10.2 for a moment...
by ef9b16a1
Sun Jan 22, 2012 10:24 am
Forum: FlashPro Manager
Topic: flashpro connects and locks to fn2 , wont upload or unlock
Replies: 7
Views: 3774

Re: flashpro connects and locks to fn2 , wont upload or unlo

So I have to use the beta version ? I can't go back from that firmware
by ef9b16a1
Sun Jan 22, 2012 6:59 am
Forum: FlashPro Manager
Topic: flashpro connects and locks to fn2 , wont upload or unlock
Replies: 7
Views: 3774

Re: flashpro connects and locks to fn2 , wont upload or unlo

to the beta version???? u d be kidding its not my car , its customers cars , i cannot risk that.. unless hondata tells me its the stable version when i press check for updates , and 1.1.9.6 is the current version , there is no NEW version , for a customers car.. in my car i d try anything , thats an...
by ef9b16a1
Sat Jan 21, 2012 8:17 pm
Forum: FlashPro Manager
Topic: flashpro connects and locks to fn2 , wont upload or unlock
Replies: 7
Views: 3774

Re: flashpro connects and locks to fn2 , wont upload or unlo

hi when you plugin the fp in a new soft version and there is a new firmware update available , it prompts you to upgrade , as soon as u plug it in the usb nothing happens when i plug this particular fp unit , and i cant see a manual update firmware option... can i force a firmware update? other than...