Hondata

I ve been following this thread , i ll be tuning a edm ctr fk8 with aftermarket turbo soon , everything was ok with stock turbo till 390 whp , will see if we an duplicate the problem i had the same exact problem with boost command not going over 25psi with an edm fk8 with mhi turbo , xdi pump and 1...

Disable all live tuning. Disable the fuel pump limit. Increase the wastegate flow table. Increase the throttle table to 600 nm on the top column. since he is using a larger turbo , does the compressor efficiency map play any role in reducing bpcmd ? since you suggest to increase the wastegate flow ...

Hondata wrote: ↑Mon Mar 25, 2024 8:55 pm Can you send the calibration and datalogs?

i think they are in the previous page , civicvti has uploaded them

I ve been following this thread , i ll be tuning a edm ctr fk8 with aftermarket turbo soon , everything was ok with stock turbo till 390 whp , will see if we an duplicate the problem

hello i cant find a 37820-rbb-a21 for a customer with manual edm cl9 , so i will opt for the a/t a71 and lose the reverse lockout , so i ll then use the tsx flashpro and can adapter cable https://hondata.com/flashpro/flashpro-tsx , i see the above posters there was a problem with immo , did you fina...

I will do it tommorow when the customer comea back to know wjat works or not for the next time i one across the issue , but i ll likely put a oem ecu becaise he lives 300km away and dkesnt have time for testing. If it helps we flash the usdm civic si ecu (for boost control) with the international fl...

.

If i go to a honda dealer and he tries to reflash the hondata ecu with oem file would it work? And then he d have to programm the immo again also i guess , since now it is off

Hello Euro fn2 has one of tje hondata early reflashed ecus.. I ttird to lock a new flashpro to remap the car , i thought it would overwrite the tune or consider it the stock one to save . I am getting tmessages ,that it may not be able to complete ans then i d have to send ecu and flashpro to hondat...

same thing with euro fk8
viewtopic.php?p=135981#p135981

it is exactly the same problem , but with the fl5.
https://hondata.com/forum/viewtopic.php?t=27473

i second that , i connect to many kpro units every week , it was the easiest trouble free system to connect to , instantly every time , this month i ve had 3 different vehicles edm ep3 , that the ecu would connect but freeze during the upload , or didnt respond and the software would close , i used ...

hel;lo , seriously interested but you need to share more info and pics , and pricing , i have a high hp fn2 customer that would buy it if he sees info pics and or video of it working , help us and we ll help you

a bit late , but the usdm ecus work fine with the flashpro int version for fn 2, i have 3 cars with usdm ecus for boost control... they work fine with the flashpro -int version , i dont now if the oppossite works though , the flashpro -us , if it works with an edm rsp ecu

you could use a wastegate in the intake pipe and control boost by the solenoid via ecu , it works