Search found 35 matches

by beaugus
Wed Jan 02, 2013 5:27 pm
Forum: TSX 2004-2014
Topic: Final Drive
Replies: 4
Views: 3964

Re: Final Drive

+1 for this feature to be added to Flashpro. It's the very last outstanding issue to re-enable cruise control for us :-)
by beaugus
Sun Dec 23, 2012 8:41 pm
Forum: TSX 2004-2014
Topic: some questions for Euro CL9 users
Replies: 7
Views: 6236

Re: some questions for Euro CL9 users

The tunes included with FlashPro are ideally considered to be a "basemap" or otherwise a starting point to get you started on the tuning path. We found the TSX mapping to be generally okay air/fuel ratio wise as Hondata factor in quite a lot of safety margin - obviously all for good reason however t...
by beaugus
Sun Dec 23, 2012 6:27 am
Forum: TSX 2004-2014
Topic: some questions for Euro CL9 users
Replies: 7
Views: 6236

Re: some questions for Euro CL9 users

Hi Dinoc, where about's in the world are you located? I'm in Australia and currently running the 07-08 TSX ECU in our 05' Accord Euro with very few issues. Modifications to date on our Euro are simply a Mugen intake kit and Cat-back exhaust system however we plan on getting extractors / high flow ca...
by beaugus
Thu Nov 15, 2012 4:34 pm
Forum: FlashPro Manager
Topic: FlashPro V1.4.5 (beta)
Replies: 27
Views: 12564

Re: FlashPro V1.4.0 (beta)

+1 For adding final drive correction option. Still waiting for this to become available for TSX Flashpro users to re-enable cruise control. Edit; actually the ability to input custom gear ratios would be better in Australian Accord Euro owner's situations due to the slightly different ratios found o...
by beaugus
Mon Sep 17, 2012 10:21 pm
Forum: FlashPro Manager
Topic: Random EAccess Violation Error When Downloading Datalog?
Replies: 0
Views: 1211

Random EAccess Violation Error When Downloading Datalog?

Not sure if anyone else experiences this issue or if its only an isolated issue with my FP Manager software however I have recently been getting these random EAcessViolation errors occur when attempting to download datalogs from the FP unit itself and only when downloading them via my TSX flashpro u...
by beaugus
Fri Sep 14, 2012 5:22 am
Forum: TSX 2004-2014
Topic: P2647CEL 05'Aus Accord Euro VTEC Oil Pressure Switch Enabled
Replies: 8
Views: 6265

Re: P2647CEL 05'Aus Accord Euro VTEC Oil Pressure Switch Ena

Thanks for clarifying Spunkster :)
by beaugus
Wed Sep 12, 2012 11:11 pm
Forum: TSX 2004-2014
Topic: P2647CEL 05'Aus Accord Euro VTEC Oil Pressure Switch Enabled
Replies: 8
Views: 6265

Re: P2647CEL 05'Aus Accord Euro VTEC Oil Pressure Switch Ena

As far as I can tell there is defiantly no VTEC oil pressure switch fitted to our Australian Accord Euro's at least up to 05' models that I can confirm with so far. Spunkster, is it safe to assume there is normal VTEC operation using the TSX Flashpro and the option turned off in FP Manager consideri...
by beaugus
Wed Sep 12, 2012 4:42 am
Forum: TSX 2004-2014
Topic: P2647CEL 05'Aus Accord Euro VTEC Oil Pressure Switch Enabled
Replies: 8
Views: 6265

Re: P2647CEL 05'Aus Accord Euro VTEC Oil Pressure Switch Ena

Can anyone confirm that disabling the option "VTEC Oil Pressure Switch Enabled" for Australian Accord Euro's which are not fitted with this Pressure Switch is the correct way to handle the P2647 CEL after reflashing with the 04-05 TSX Basmap? If this option is disabled on a vehicle which does not ha...
by beaugus
Fri Sep 07, 2012 9:28 pm
Forum: TSX 2004-2014
Topic: P2647CEL 05'Aus Accord Euro VTEC Oil Pressure Switch Enabled
Replies: 8
Views: 6265

Re: P2647CEL 05'Aus Accord Euro VTEC Oil Pressure Switch Ena

I've taken our Accord for a brief test drive using the TSX basemap with the VTEC oil pressure switch enabled option turned off. I have attached the datalog of the drive for reference and the edited calibration file. A few knocks were recorded but being a basemap specifically tuned for the TSX I was ...
by beaugus
Fri Sep 07, 2012 7:34 pm
Forum: TSX 2004-2014
Topic: P2647CEL 05'Aus Accord Euro VTEC Oil Pressure Switch Enabled
Replies: 8
Views: 6265

Re: P2647CEL 05'Aus Accord Euro VTEC Oil Pressure Switch Ena

Initially I thought that our Australian delivered Accord Euro's did have a VTEC oil pressure switch, upon further inspection today though I'm starting to believe that we don't. I looked at both the TSX and Accord Euro workshop manuals and it was only until I saw an exception on the page stating "Exc...
by beaugus
Fri Sep 07, 2012 12:40 am
Forum: TSX 2004-2014
Topic: P2647CEL 05'Aus Accord Euro VTEC Oil Pressure Switch Enabled
Replies: 8
Views: 6265

P2647CEL 05'Aus Accord Euro VTEC Oil Pressure Switch Enabled

Hondata, I've recently installed an 07-08 Manual TSX ECU in my Australian delivered Accord Euro CL9 and have had the immobilizer and VIN successfully coded by my local Honda dealer - upon uploading the 04-05 TSX basemap to my ECU however I initially had the FTP sensors error as I forgot to disable t...
by beaugus
Mon Sep 03, 2012 5:27 am
Forum: FlashPro Manager
Topic: FlashProManager V1.3.7 (beta)
Replies: 23
Views: 8945

Re: FlashProManager V1.3.4 (beta)

Hondata, is there any chance you could add the option to input custom gear ratio values for the 04-05 TSX in an upcoming beta release? One of the outstanding issues with using an 07-08 TSX ECU's in my Australian delivered Accord Euro (and I'm sure this is applicable to anyone else using a TSX ECU wi...
by beaugus
Sun Sep 02, 2012 10:04 pm
Forum: TSX 2004-2014
Topic: 07-08 TSX ECU Availability?
Replies: 2
Views: 3588

Re: 07-08 TSX ECU Availability?

Just wanted to post a brief update; I managed to finally source an 07-08 Manual TSX ECU and have received it today. According to Acura, the ECU availability has improved and units are readily available to order from Acura parts department as from mid this month with +/- 3 days for delivery to most m...
by beaugus
Sat Aug 04, 2012 9:14 am
Forum: TSX 2004-2014
Topic: 07-08 TSX ECU Availability?
Replies: 2
Views: 3588

07-08 TSX ECU Availability?

I've been trying to track down an 07-08 TSX ECU for the past couple of days (37820-RBB-A21) but it seems that every Acura parts dealer I've inquired with has told me the same thing, the 07-08 ECU's are backordered and a lot of their customers have been waiting a month or some cases more for them to ...
by beaugus
Sun Jul 29, 2012 9:24 am
Forum: TSX 2004-2014
Topic: UKDM CL9 Flashpro green canbus connector???
Replies: 14
Views: 9828

Re: UKDM CL9 Flashpro green canbus connector???

Thanks for the update K_A_N_O, I'll be referring to this post when my ECU and Flashpro unit arrives (hopefully within the next week) Just a quick question though, did you solder any wiring into the ECU-side CAN connector or did you use the Hondata specific harness and as per your photo, have you jus...