Search found 81 matches

by fonzeka
Thu Nov 29, 2018 10:10 am
Forum: K-Pro / KManager
Topic: K20 RX7 FD. HONDATA
Replies: 4
Views: 484

Re: K20 RX7 FD. HONDATA

With kpro4 you can use advanced protection and set a min oil pressure that cuts the engine.
https://www.hondata.com/help/kmanager/i ... ection.htm
by fonzeka
Sat Oct 13, 2018 1:28 pm
Forum: K-Pro / KManager
Topic: S.Trim Adding Fuel to an already rich condition
Replies: 13
Views: 1118

Re: S.Trim Adding Fuel to an already rich condition

I had a similar problem (but inverted) in the beginning of tuning my car, AFR was going fully lean but STFT was at -20% and no fuel was added. I solved it by disabling my stock O2 sensor (S2000 kpro so unchecked "secondary O2 sensor"), not sure how you could do that on a k-series though. If you got ...
by fonzeka
Sat Oct 13, 2018 3:51 am
Forum: K-Pro / KManager
Topic: S.Trim Adding Fuel to an already rich condition
Replies: 13
Views: 1118

Re: S.Trim Adding Fuel to an already rich condition

I'm no expert here but a few things to consider, you got no IACV, big TB, car is cold and outside temp is also rather cold. AFCMD is not 14.7 when engine temp is low. The first STFT maxout in the log looks pretty normal. The one at the end of the log does look a bit weird though and I agree the STFT...
by fonzeka
Tue Sep 18, 2018 8:46 am
Forum: Hondata Mobile
Topic: KPro oil temperature on dashboard
Replies: 3
Views: 1435

Re: KPro oil temperature on dashboard

Is it possible to ad this to the Hondata app?
Are they available at all through the bluetooth connection? Like custom PID sensors in Torque or other apps.
by fonzeka
Sun Sep 09, 2018 3:20 am
Forum: K-Pro / KManager
Topic: K20a2 DC5 K-pro question
Replies: 5
Views: 497

Re: K20a2 DC5 K-pro question

Get a race header without cat and a straight through exhaust system, it will shoot some flames occasionally.
Make sure to get it tuned as well otherwise its probably going to run lean.
by fonzeka
Mon Jul 02, 2018 11:20 pm
Forum: K-Pro / KManager
Topic: Throttle too sensitive when on to off
Replies: 7
Views: 800

Re: Throttle too sensitive when on to off

He was talking about the Idle Valve Duty Cycle https://www.hondata.com/help/kmanager/i ... meters.htm
by fonzeka
Sat Jun 09, 2018 10:52 am
Forum: K-Pro / KManager
Topic: AEM 30-0300 Wideband Cal for closed loop
Replies: 7
Views: 1207

Re: AEM 30-0300 Wideband Cal for closed loop

You are asking questions about AEM products to Hondata, normally you do your own research or ask the actual manufacturer :) Compare the scaling table on your wideband to the ones available in kmanager http://www.aemelectronics.com/files/instructions/30-0300.pdf If you find one that's the same you ca...
by fonzeka
Mon May 21, 2018 12:10 am
Forum: K-Pro / KManager
Topic: Board Installation
Replies: 2
Views: 476

Re: Board Installation

I don't think dealers are supposed to sell boards separately.
If you don't know what to do it's probably best to send ecu and board to an authorized dealer for installation.
by fonzeka
Thu May 03, 2018 10:54 pm
Forum: Hondata Mobile
Topic: Any New Upcoming Updates?
Replies: 12
Views: 3726

Re: Any New Upcoming Updates?

Thank you Hondata, that's great news!
by fonzeka
Fri Apr 20, 2018 11:36 am
Forum: Hondata Mobile
Topic: Android applications
Replies: 22
Views: 12738

Re: Android applications

Is possible to show on 3rd party app (Torque for example) knock count, AFR, Ethanol % and values like these? Is there any list of PIDs for configuring these readings in 3rd party apps? There are some in this document https://www.hondata.com/downloads/Bluetooth.pdf Unfortunately not the real useful ...
by fonzeka
Thu Apr 05, 2018 5:16 am
Forum: K-Pro / KManager
Topic: K-PRO V4 Wideband lambda problem - Running lean
Replies: 8
Views: 1425

Re: K-PRO V4 Wideband lambda problem - Running lean

AFCMD is the commanded AFR, the value above that (AF) should show what your wideband reads. When you are not using a wideband as primary sensor the AF will show a static 14.7:1 just like yours are doing now. I did take a look on the logs but not sure what the problem is here, maybe try and clear ecu...
by fonzeka
Tue Apr 03, 2018 3:49 am
Forum: K-Pro / KManager
Topic: Changing injector size/ voltage compensation on existing tune
Replies: 2
Views: 608

Re: Changing injector size/ voltage compensation on existing tune

Does it still have an idle air control valve?
Otherwise you can only adjust the idle by setting the throttles slightly open, if you want cold idle around 1000rpm your hot idle will be much higher.
by fonzeka
Mon Feb 26, 2018 2:38 pm
Forum: K-Pro / KManager
Topic: kpro not reading the wideband
Replies: 6
Views: 1164

Re: kpro not reading the wideband

Yeah I think Hondata might got it the other way round? I've seen the same thing on another car (too cold reading on stock sensor).
by fonzeka
Mon Feb 26, 2018 10:01 am
Forum: K-Pro / KManager
Topic: kpro not reading the wideband
Replies: 6
Views: 1164

Re: kpro not reading the wideband

You intake temps seems very low (~18°F).
I'm not sure where you live but if you are still running the stock S2000 IAT sensor this could be another reason for your bad fuel economy.