Search found 100 matches

by Zperformance
Tue Sep 06, 2016 5:16 pm
Forum: S300 Calibrations
Topic: need b17a1 turbo basemap help
Replies: 4
Views: 1439

Re: need b17a1 turbo basemap help

This should be on the richer side at full throttle. Adjust AFR where it isn't safe. timing map is a bit conservative.

*Use at your own risk*
by Zperformance
Tue Sep 06, 2016 5:13 pm
Forum: S300 Calibrations
Topic: Help!!!!! Need B18b1 turbo map
Replies: 1
Views: 1184

Re: Help!!!!! Need B18b1 turbo map

Basemap for 12psi. Should be on the richer side at full throttle. I advice to have wideband and adjust slightly where it isnt perfect for AFR. Timing should be okay until you get a actual tune. Let me know how it does.

*use at your own risk*
by Zperformance
Mon Aug 01, 2016 6:55 pm
Forum: S300 Calibrations
Topic: Need base map for b20b turbo with supercharger.
Replies: 2
Views: 1045

Re: Need base map for b20b turbo with supercharger.

I would recommend a wideband for sure and accurate boost gauge. Alot of stress for the motor you would want your boost level lower or not even get into boost yet.
by Zperformance
Sun Jul 31, 2016 9:24 pm
Forum: S300 Calibrations
Topic: B20 turbo need calibration help
Replies: 2
Views: 2861

Re: B20 turbo need calibration help

you might want to smooth the graph out a bit, the car should run better.
by Zperformance
Wed Jul 20, 2016 7:40 pm
Forum: s300 / SManager
Topic: How do you scale a motor
Replies: 0
Views: 2356

How do you scale a motor

As the picture show, how do you scale a 1.6L into a 2.0L or basically i just use the p30 map and tune it for the b20v and its consider a 2.0L scaled map?
I tried the search and it doesnt quite talk about this just injector scaling. Thanks!
by Zperformance
Fri Jul 15, 2016 10:38 am
Forum: S300 Calibrations
Topic: lsv turbo b16 head gsr cams 900cc gt35r
Replies: 6
Views: 2833

Re: lsv turbo b16 head gsr cams 900cc gt35r

Check your boost cut parameters
by Zperformance
Thu Jul 14, 2016 8:24 pm
Forum: S300 Calibrations
Topic: in Need of a basemap for a b16 block /Gsr head/ 450 dsm injectors/ type r internals
Replies: 2
Views: 2475

Re: in Need of a basemap for a b16 block /Gsr head/ 450 dsm injectors/ type r internals

This should be a descent base to start off with, I couldn't find the deadtime for your specific injectors but hopefully that should get the car too start and idle and you can smooth things out. I advise you to have a wideband connected. Let me know how it run for you.


"Use at your own risk"
by Zperformance
Thu Jul 14, 2016 7:59 pm
Forum: S300 Calibrations
Topic: lsv turbo b16 head gsr cams 900cc gt35r
Replies: 6
Views: 2833

Re: lsv turbo b16 head gsr cams 900cc gt35r

Try that out and see if it would start up and run descent. If you dont have wideband you should get one and hook it up first. I only smooth it out to 1.8 bar since im assuming your on stock map sensor.




"Use at your own risk"
by Zperformance
Thu Jul 14, 2016 12:41 pm
Forum: S300 Calibrations
Topic: d16y8 brian crower stage 2 cams(Bc0071)
Replies: 0
Views: 2492

d16y8 brian crower stage 2 cams(Bc0071)

Hey i notice no one have a basemap for this setup so i am willing to give out the map that i tuned for my own car for you guys. Feel free if someone want to adjust it to make it better and resend it too me or point me to the right direction, i know there is still alot of improvement to be made. "Use...