Search found 81 matches

by gtfrede07
Tue Aug 27, 2019 11:27 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Best Base Map Calib. for New Intake Takeda
Replies: 72
Views: 1546

Re: Best Base Map Calib. for New Intake Takeda

When you re baseline or just for your next upload try one of 2 things..... Best thing to try would be re-enabling rev hang to see if the counts disappear as it could be the mechanical sound of the throttle plate snapping closed. OR leave rev hang disabled and make sure to reduce the fuel cut overrun...
by gtfrede07
Tue Aug 27, 2019 11:21 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Best Base Map Calib. for New Intake Takeda
Replies: 72
Views: 1546

Re: Best Base Map Calib. for New Intake Takeda

They dont state this in the help file so maybe hondata will chime in.... disabling l.trim should allow for a better calibration of the afm based on s.trim only. To me end result is end result but maybe this would improve the methods? I was under the assumption that zeroing the l.trim limit would kic...
by gtfrede07
Sat Aug 24, 2019 11:54 am
Forum: Civic Si 2012-2015 US/Canadian / 2013+ ILX
Topic: Acuity Curl Control CAI MAP PLEASE
Replies: 4
Views: 1166

Re: Acuity Curl Control CAI MAP PLEASE

I just did cal yesterday on a 2015 for a guy that put this on and it wouldn't run at all. He was stranded at his job after install because he was unaware of the consequences. Took all of 20 minutes street tuning it. The trims were off the charts maxed and it barely stayed running. He's out ripping i...
by gtfrede07
Fri Aug 23, 2019 1:11 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Best Base Map Calib. for New Intake Takeda
Replies: 72
Views: 1546

Re: Best Base Map Calib. for New Intake Takeda

Keep us posted on your findings. That is a very dramatic change from where you had it lol.
by gtfrede07
Thu Aug 22, 2019 5:17 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Best Base Map Calib. for New Intake Takeda
Replies: 72
Views: 1546

Re: Best Base Map Calib. for New Intake Takeda

Still happening at the shift? I wouldn't worry about it at all.
by gtfrede07
Thu Aug 22, 2019 7:15 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Best Base Map Calib. for New Intake Takeda
Replies: 72
Views: 1546

Re: Best Base Map Calib. for New Intake Takeda

Whoop whoop. See its not that bad at all!!!
by gtfrede07
Thu Aug 22, 2019 5:32 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Best Base Map Calib. for New Intake Takeda
Replies: 72
Views: 1546

Re: Best Base Map Calib. for New Intake Takeda

I have tried to calm down the lower range (idle- 2-4 g/s up to maybe 11 g/s) and man it is stubborn. I eventually got the low range close and quit being ocd about that area.

Good job!
by gtfrede07
Wed Aug 21, 2019 11:34 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Best Base Map Calib. for New Intake Takeda
Replies: 72
Views: 1546

Re: Best Base Map Calib. for New Intake Takeda

exactly. its hard to hit every single load sample that many times lol. That is why the longer the log assuming no dramatic temperature/humidity changes, the better.
by gtfrede07
Wed Aug 21, 2019 11:32 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Best Base Map Calib. for New Intake Takeda
Replies: 72
Views: 1546

Re: Best Base Map Calib. for New Intake Takeda

Also just to clarify and answer one of you questions above. Driving down the highway would not lead to heat soak. Idling for 10 minutes or more or stop and go traffic is when the heat soaking becomes a factor and it is more or less un avoidable at times.
by gtfrede07
Wed Aug 21, 2019 11:30 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Best Base Map Calib. for New Intake Takeda
Replies: 72
Views: 1546

Re: Best Base Map Calib. for New Intake Takeda

20190330_233303 afm.jpg
This is a fairly recent one of mine I had saved in my phone.
20190330_233303 afm.jpg (4.07 MiB) Viewed 240 times
by gtfrede07
Wed Aug 21, 2019 11:09 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Best Base Map Calib. for New Intake Takeda
Replies: 72
Views: 1546

Re: Best Base Map Calib. for New Intake Takeda

Basically the longer you drive on a flash the more sample data the ecu acquires and the more "overall changes" will be in your recorded data. Multiple days with different humidity and temperatures etc basically lets the computer learn your settings and you can then react to its reactions. If that ma...
by gtfrede07
Wed Aug 21, 2019 11:03 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Best Base Map Calib. for New Intake Takeda
Replies: 72
Views: 1546

Re: Best Base Map Calib. for New Intake Takeda

My initial setups are just as yall are doing. Once I feel I am close I will maybe do it once a week. Once I think its perfect Ill make a change once a month maybe. It always proves to me it cant be "perfect" lol. But I try to get it as close as possible. My last upload has taken about 2 months of da...
by gtfrede07
Wed Aug 21, 2019 8:52 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Best Base Map Calib. for New Intake Takeda
Replies: 72
Views: 1546

Re: Best Base Map Calib. for New Intake Takeda

Once you get to this stage you can keep being more and more meticulous on the "peaky" areas. Couple suggestions to make life easier. Make sure when you pull the data the car is COMPLETELY WARM. Heat soak affects everything too. Outside temps near 75 are ideal. Major temp ambient temp swings definite...
by gtfrede07
Wed Aug 21, 2019 8:29 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: AFM.v reads zero
Replies: 15
Views: 469

Re: AFM.v reads zero

miscommunication if its trimming positive you need to add to the afm number. To clarify, if the STRIM is within negative values i should adjust by putting a (-) negative value towards zero and if its within positive value i should adjust by putting a (+) positive value towards zero. Please correct ...
by gtfrede07
Thu Aug 15, 2019 5:03 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: AFM.v reads zero
Replies: 15
Views: 469

Re: AFM.v reads zero

As flat as the mean is I would almost suggest +20 and re datalog. Thats just a big swing in one go. Try the 15% and see if it still wants added to. TO CLARIFY BECAUSE I CANT EDIT THE ABOVE POSTS IF S.TRIM IS A POSITIVE NUMBER YOU SHOULD INCREASE THE AFM NUMBER IF ITS TRIMMING A NEGATIVE NUMBER YOU D...