Search found 52 matches

by Djbower1
Mon Apr 24, 2006 10:53 am
Forum: s300 / SManager
Topic: S300 - Code 8 TDC
Replies: 9
Views: 4046

mkulak wrote:Does B9 need power once the car is running? I know if needs it when cranking.. Right?

Thanks for your help...
Only when cranking. Just run a wire from the starter solenoid
by Djbower1
Sun Apr 23, 2006 1:11 pm
Forum: s300 / SManager
Topic: S300 - Code 8 TDC
Replies: 9
Views: 4046

I made my own loom and had the same problem.

I had B9 going to the main relay and had to put a wire from the starter relay to B9 as well.

Let us know how you get on.

Dan
by Djbower1
Sun Apr 09, 2006 12:17 pm
Forum: Non-Hondata
Topic: CEL Six wont go away!!!!!!
Replies: 9
Views: 3813

Bad wiring would make sense....

Spice into the ect sensor wires and run them directly to the ecu.

Ecu wires are D13 for Signal & D22 for Sensor Ground.

Hope you get it sorted.

Dan
by Djbower1
Thu Mar 16, 2006 3:21 pm
Forum: Non-Hondata
Topic: BIOETHANOL E85
Replies: 2
Views: 1592

That would be grate if you could find your research.

10:1 wow that must be bad for the fuel consumption

Thanks,

Dan
by Djbower1
Thu Mar 16, 2006 2:22 pm
Forum: Non-Hondata
Topic: BIOETHANOL E85
Replies: 2
Views: 1592

BIOETHANOL E85

Hi all,

Does the Unites States have BIOETHANOL E85 fuel?? The reason I ask is that they have just launched it here in the uk.

I have been told that is 104 RON which means more advance and abit more power :)

I would appreciate any feedback from people which have used E85 Fuel

Thanks,

Dan
by Djbower1
Tue Mar 14, 2006 1:44 pm
Forum: s300 / SManager
Topic: Knock sensor with flashing MIL
Replies: 5
Views: 2643

Get yourself a Plx Devices R500.

http://www.plxdevices.com/R-500_productinfo.htm

It a fantastic piece of equipment.

Dan
by Djbower1
Mon Mar 13, 2006 3:12 pm
Forum: s300 / SManager
Topic: a/f readings
Replies: 9
Views: 3557

If the plx is displaying correct. it means either you have a bad ground or you just need the change the voltage offset in the smanage so that it reads the same as the plx
by Djbower1
Sun Feb 26, 2006 2:11 pm
Forum: S300 Calibrations
Topic: Posting Your Own Calibration
Replies: 3
Views: 5226

Posting Your Own Calibration

Hondata

Is it ok for us to post our own Calibrations so that other forum members can benefit?

Dan
by Djbower1
Sun Feb 26, 2006 2:07 pm
Forum: s300 / SManager
Topic: fuel trim
Replies: 11
Views: 4595

It shouldn't do, But you have now changed the fuel trim and that could of messed something up.

I'm not 100% sure so hopefully someone will offer a second opinion.

Dan
by Djbower1
Sat Feb 25, 2006 3:48 pm
Forum: s300 / SManager
Topic: fuel trim
Replies: 11
Views: 4595

Your base fuel pressure is to high.

Rc Injectors are rated @ 43PSI i Think.

Dan
by Djbower1
Wed Feb 15, 2006 9:58 pm
Forum: s300 / SManager
Topic: Decel stalling
Replies: 17
Views: 8269

Have you tried undoing the air bypass screw on the throttle body?
by Djbower1
Wed Feb 15, 2006 4:26 am
Forum: s300 / SManager
Topic: Decel stalling
Replies: 17
Views: 8269

Quoted from Hondata Help file. IAC duty cycle - adjusts the feedback relationship between the current engine speed, target idle speed and idle valve duty cycle. If the idle dips low once the throttle is released, increase the IAC duty cycle. If the idle speed 'hangs', reduce the IAC duty cycle. Have...
by Djbower1
Wed Feb 08, 2006 6:59 pm
Forum: Applications
Topic: Hondatas P28 Ecus
Replies: 1
Views: 1435

Hondatas P28 Ecus

FAO Hondata

Are you OBD1 P28 Ecus brand new???

Do you sel A OBD1 P28 ecu with a OBD2A (not B) Adaptor built in???

Thanks

Dan
by Djbower1
Tue Feb 07, 2006 9:25 pm
Forum: s300 / SManager
Topic: Code 23 (knock sensor)
Replies: 3
Views: 2096